Construction of 4 additional rooms for Govt. High School Building at Mindhal

Excavation of earthwork in hilly area all heights and depths, in all kind of soils including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution, etc. and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super-elevation and level as shown on the drawings or as directed by the Engineer-in-charge, in conformity with the requirement of technical specification of Ministry of Rural Development for Rural Roads August, 2004 (Two Thousand Four),C-1603.1, 1603.2 (Clause - One Thousand Six Hundred Three point One, One Thousand Six Hundred Three point Two) to achieve designed formation width including hauling and stacking of material useful for construction at suitable sites and safe disposal of unsuitable cut materials by all modes of transportations in all leads and lifts at specified places. in specified manner, systematically with due consideration to avoiding adverse effects on environment, trimming, filling of unevenness, blind age and finishing of the road to specified dimensions to the entire satisfaction as directed by the Engineer-in charge for smooth plying of traffic. All useful material such as stones, shingle, aggregate and slates shall be sorted out and stacked along the road side not less than 71.20 cubic metre ( Four Seven One Five Point Eight Seven ) in all cases, failing which recovery at the rate of Rupees @ 300/ only (Rupees Three Hundred Only) Amounting to Rs. 21360/- ( Twenty One Thousand Three Hundred & Sixty )only .per cubic meter shall be effected on pro-rata basis in each running bill. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases.including haulage of mateial with in all leads, lifts and carriage of materials and as directed by the Engineer in-charge.

Earth work in excavation for all types of road structures such as retaining wall, breast wall, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary Rock,Hard rock, chiseling/wedging out of rock (where blasting is prohibited ) as per drawing and M.O.R.D. technical specifications Clause 305 and 1603.4 as per direction of the Engineer -in - charge

Providing and laying cement concrete 1:4: 8 (One cement: Four sand: Eight graded stone aggregate 40mm (forty milimetre) nominal size) and curing complete including cost of form work in foundation and plinth, and as per directions of Engineer - in- Charge

Random rubble masonry uncoursed/brought to courses with hard stones of approved quality in sub structure in cement mortar 1:6 (one cement is to six sand) for structure like retaining walls, breast walls, wing walls, toe walls, abutments and similar works etcetera, including curing complete

Construction of Dry rubble masonry in breast wall and retaining walls revetment walls and parapets etc complete as per MORD technical specification clause 702,704,1606.5 and as per directions of Engineer - in- Charge

Providing and laying P.C.C. M-20 copping on the top of the winw wall,return wall & Breast wall etc.complete as per drawing and techanical specification clause 612,710.1204,3.1(1:2:4)and as per directions of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation all leads, lifts and other incidental complete in all respect.

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including all taxes,GST, carriage of material, within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in foudation and plinth including all taxes, GST, carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for foundation, footing, basis of columns etcetra and mass concrete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for stair cases with slopping or stepped soffit including riser and stringers excluding landing floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls upto all width and heights including all taxes,GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm(Teenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement for RCC work in:- Foundation footings bases of columns and the like and mass concrete including all leads and lifts.as per HPPWD specifications,approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm(Twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Suspended floors roofs, landings, shelves and their supports balconies girders bressumers and cantilever upto floor all level as per HPPWD specifications,approved Drawings,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Columns, pillars posts and struts upto floor two level as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (Twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Stair case except spiral stairs excluding landing but including preparing of top surface and finishing of nosingas upto floor two level as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (Twenty milimetre) nominal size including mechanically mixing and vibrating (M-20 Grade) excluding the cost of form work and reinforcement RCC work in:-Wall any thickness but not less than 0.1mm thick attached pillasters buttress plinth and string courses coping bed plates , anchor bolt window sill and the like upto floor two level as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and laying mild/tor steel reinforcement for reinforced cement concrete work including straightening, bending, binding and placing in position complete including cost of binding wirecomplete as per HPPWD specification as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Filling in plinth with sand under floors including watering, ramming consoli

dating and dressing complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing stone filling under floor with dry hand packed and ramming ,grouting in proper order and filling with interstices spalls for making the surface for under layer of cement concrete flooring excluding the cost of cement concrete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Second class brick masonry in common burnt clay building bricks in super structure above plinth level upto floor any level in cement mortar 1:6 (One Cement is to Six Sand), including curing completeas per specification, approved drawing, design, to the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Half brick masonry using second class common brunt building brick in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying upto all floor level 300x300mm(three hundred millimetre into thre hundred millimetre) and 25mm (twenty five millimetre) thick automatic hydraulically compressed and polished terrazzo tiles ISI marked size IS- 1237 with (50% white and 50% grey cement) ofd NTC or its equivalent of approved brand /make and of approved shade with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25mm (twenty five millimetre) average thicknes of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete including carriage of material within all leads and lifts as per the direction of the engineer-in-charge and other incidentals.

Providing and laying upto all floor level 20mm (twenty millimetre) thick automatic hydraulically compressed and polished terrazzo tiles ISI marked size IS- 1237 of ( NTC/GTC) and of approved shade with marble chips of specified sizes laid in skirting , risers of steps and dado upto any height ,on 10mm (ten milimeter) thicknes of cement mortar 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete including carriage of material within all leads and lifts as per the direction of the engineer-in-charge and other incidentals.

P/L Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cemetn slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cemetn mortar 1:4 (1 cement :4 coarse sand) Light shade pigment using white cement etc complete complete as per HPPWD specifications, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing angle iron doors, window celerestory windows frame (single rebate) manufactured from M.S Angle iron 35x35x4mm and M.S flat 50x4mm (fifty into four milimetre) combined together to make one frame as per design and drawing including hinges jamb lock , jamb bead and if required angle threshold of mild steel angle 50x25mm (fifty into twenty five milimetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel but hinges 2.5mm (two point five milimetres) thick with provision of locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre- treatment of the surface as directed by the Engineer- in- charge including carriage of material within all lead ,lift and other incidentals . The rate including octroi, toll tax ,sales tax or any other taxes imposed by the government.

Providing and fixing mild steel channel frame for doors, window and ventilators (Double Rebate) manufactured from mild steel channel section ISLC-75 (seventy five) with channel section 75X40 mm (senenty five into forty milimetres ) and M.S (mild steel) flat 75x4 mm (seventy five into four milimetres) as per design and approved drawing including hinges jamb lock, jamb bead and if required angle threshold of mild steel angle 50x25mm (fifty into twenty five milimetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel but hinges 2.5mm (two point five milimetres) thick with provision of locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre- treatment of the surface as directed by the Engineer- in- charge including carriage of material within all lead ,lift and other incidentals . The rate including octroi, toll tax ,sales tax or any other taxes imposed by the government.

Providing and fixing Fixed steel glazed doors, windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15mm lugs and iron fitting including providing and fixing of glass pans with gazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint.

Providing and fixing Side hung steel glazed doors, windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15mm lugs and iron fitting including providing and fixing of glass pans with gazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint.

Providing and fixing Top hung steel glazed doors, windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15mm lugs and iron fitting including providing and fixing of glass pans with gazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint.

Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains of cross bands and face veneers on both faces of shutter. 35 mm thick including stainless steel butt hinges with necessary screw. The rate including octroi, toll tax ,sales tax or any other taxes imposed by the government.

Providing and fixing plain M.S. plain grills of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws or by welding within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 250x16 mm (two hundred fifty into sixteen millimetre) anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 200 X 10 mm (two hundred into ten milli

Providing and fixing 150 X 10 mm (one hundred fifty into ten millimetre) aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 125 mm (one hundred twenty five millimetre) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 100mm (one hundred millimetre) aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including all taxes and carriage of materials within all leads, lifts as per specification and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing 150mm oxidized M.S. single acting spring hinges with necessary screws etc. complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 100mm (one hundered millimeter) bright finished hard drawn hooks and eyes.complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing Blackboard of Size 2.40x1.20 mm made of prelaminated phenol bonded board with suede finish with side beeding of 40x20mm in first class deodar wood and wooden shelves 150x20mm first class deodar wood fied on the bottom portion of black board in cluding fdixing on plastered surface masonary concrete block wall with necessary screws etc complete as per HPPWD specification and directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing under layer for plinth protection of 75 mm (Seventy five millimetre) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimettre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications, as per the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing plinth protection 50mm(fifty milimetre) thick in cement concrete 1:3:6 (one cement : 5three sand :six graded stone aggregate 20mm(twenty milimetre) nominal size as per HPPWD specifications,approved Drawing,design to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side walls. 15x22 (Fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one Cement :five Sand : ten graded stone aggregate) of 40 mm (forty millimetre) nominal size and 7.5 cm (seven point five) cement concrete 1:2:4 (one Cement : two sand : four Graded stone aggregate of 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design. to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing M.S. railing for ramp having 50mm dia M.S. pipe handrail slip resistant with round ends at two level at 75 cm & 90 cm height and should be extend 30 cm beyond the top and bottom of the railing with 25mm dia M.S. pipe ballusters welded to 50mm dia M.S. pipe embedded in cement concrete at 60 centimetre centre to centre duly weldded with MS flat 50 X 5mm including and applying a coat of red lead paint complete in all respect

Providing and fixing M.S. Flat iron hold fast 40x5 (forty into Five millimetre) 40Cm (forty centi metre) long including fixing to frame with 10mm (ten millimetre) dia bolts and nuts and wooden plugs and embeding in cement concrete 1:3:6 (one cement : three gradec stone : six aggrregate) 20mm (twenty millimetre) nominal size complete as per HPPWD specifications, approved Drawings,design, to the entire satisfaction and direction of Engieer in charge including hauling carriage of materials to various location through all modes of transporation within all leads, lifts and other incidental complete in all respect. The rate inclusive of GST,octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 19mm (ninteen milimetre) thick commercial board water proof shutters for CB including fixing with piano hinges with screws complete. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt..

Providing and fixing steel wire gauge shutter in Z-section using galvanized MS wire gauge of IS gauge designation 85G with wire of dia. 0.56 mm for doors, window and clearestory windows including metal beading of approved quality and shape section with necessary steel screws including applying a priming coat of read lead paint complete as per approved specification /design. The rate including octroi, toll tax ,sales tax or any other taxes imposed by the government.OPENABLE WIRE GAUGE SHUTTER IN SIDE HUNG AND TOP HUNG

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. Ready mixed paint brushing with white lead for priming wood primer. as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give an even shade including cleaning

of all dirt, dust and other foreign matter sand papering and stopping with ready mixed paint white.as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals the rate inclusive of octri,royalty,malkana and all type of texes imposed by the Govt.

Providing and fixing 0.60mm (zero decimal six zero millimetre) thick prepainted steel sheet and approve make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and rubber washer complete with all accessories as required within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing ridge or hips 60cm (zero point sixty millimetre)overall with 60 mm (sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and rubber washer complete with all accessories as required within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing valley 60cm (zero point sixty millimetre)overall with 60 mm (sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of polyster of 5 micron over 5 micron primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia and prepainted G.I. limpet and rubber washer complete with all accessories as required within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and fixing M.S. B.P. sheet 1.66mm (one point six six millimetre) to 2mm (two millimetre) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separtely) including carriage of material within all leads and lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work, composed of beam, joists, channels,angles,tee, flat and connection plates or angle cleats etcetera as in trusxses and trussed purlin , main and cross beam , hip and jack rafter,purlin connected to common rafter and the like in building including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trusses purlins in building as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

15mm (fifteen millimetre) cement plaster in single coat on fair side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

White washing with lime on decorated wall/ceiling and or slopping roofs (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt,dust,mortar drops and loose scale of lime wash and other foreign mattercarriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .