SPL REPAIR TO BLDG NO. RO 11 PATIENT STAFF ROOM INCLUDING CERTAIN LOW BUDGET WORKS AT MH UNDER GE SAUGOR

Amount

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm), complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm), complete all as specified and directed.

S&F second class hardwood 35 mm thick glazed and skeleton shutters of door open rebated and prepared to receive glass gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, shutters as specified in SSR Part -I, Section 8, clause 8.20 (a) complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, ( double or single shutter) complete all as specified and directed.

M&L for PCC 1:3:6, type C-0 (using 12.5mm graded stone aggregates) as in filling in door frame/chowkhat, hold fast , kneelers, apex stones, bed plates etc, complete all as specified and directed.

S&F mild steel work as in hold fasts, plain angle cleats for securing purlins ,and similar small articles confirming to Fe 290, Gde E 165 complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth not otherwise described and treated with tar or coal tar black paint complete all as specified and directed.

All as per Srl item No.8 as above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exc 0.1 Sqm each complete all as specified and directed.

S&F steel windows and ventilators with side hung shutters including Box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F steel windows and ventilators with side hung shutters including Box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S&F mild steel such as grills,guard bars including welding reveting complete all as specified and directed

S&F 3mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F mild steel 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F mild steel butt hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats complete all as specified and directed

S&F aluminium anodised tower bolt 200 mm long of extruded section complete all as specified and directed

S&F aluminium alloy, anodised,sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F extruded aluminium alloy handles 125 mm long , fabricated type anodised complete all as specified and directed

S&F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire of dia 4 mm as per manufacturer instruction as in ceiling with and incl S & F white non Asbestos designer ceiling cement boards 4 mm thick of size 595mm x 595 mm including dismantling of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness with frames complete all as specified and directed.

Dismantling framed timber scantlings 40 Sqcm & over in section, in any position complete all as specified and directedf

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section, in any position complete all as specified and directedf

S&F 0.50 mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws including dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof covering complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet precoated coloured Profile ridge ,fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified & directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding ,removal servicable tiles to store and rubbish off the premises complete all as specified and directed..

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed

Demolition of roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work cement concrete (unreinforced) complete all as specified and directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

M&L for RCC type B1, 1:2:4 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT bar 6mm to 8mm dia , cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement provided with construction joint 10 x 20mm filled with bitumen and sand mortar 1:3 complete all as specified and directed

M&L for providing 100 mm thick cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in sub base complete all as specified and directed

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.38 Sqm as in floors set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for glazed ceramic tiles of size 450mm x 300mm x 6mm to 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the clour of tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 25mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed

M&L for cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work etc., complete all as specified and directed

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for rendering 15mm thick on brick work or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed

M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 10mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately under respective item

M&L for preparation of surfaces of old decorated walls etc, properly making of v shape crakes and filling of all crakes with crakes seal of walls & complete removal of existing treatment and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE.

M&L for preparation of new wall surfaces and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

M&L for preparation of old surfaces of walls by complete removal of existing treatment from walls & by properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed

M&L for preparation of new surfaces of walls and applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for prepration of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed

S&F in repairs 25mm bore stainless steel pipe curtain rod including stainless steel brackets & fancy type powder coated decorative dome suitable for door/widows curtain fitted to each end in the wall complete all as specified and directed

S&F electric water heater (Geyser) ISI Marked 25 ltr capacity AC 230 V, 5 Star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size & length and all accessories complete all as specified and directed. Make: -Havells Cat Part No GHWASESWH025 (Senzo)/ Racold(Andrisr)/ Bajaj(Calenta)

M&L for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 2.5 sqmm (for main current) drawn in & including PVC Casing-n-capping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 2.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socket complete all as specified and directed

S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.58 but SPN 32- 63 Amps, 240 V -ditto-

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- The quoted rate shall deemed to be included for cutting and chasing in stone masonary and making good the disturbed surfaces

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- The quoted rate shall deemed to be included for cutting and chasing in stone masonary and making good the disturbed surfaces

Supplying and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 10 sqmm, 2 core complete all as specified and directed.

S&F GI tubing ISI marked medium grade of size 15mm bore including all fitting & fixtures on wall/ceiling/floors complete all as specified and directed

M&L for cutting and making thread existing GI tubing for alteration or addition complete all as specified and directed.

S&F PVC connection pipe 15 mm dia with PTMT nuts and bolts of length 450mm suitable for cold and hot water coupling nut of brass, heavy duty complete all as specified and directed.

M&L for grouting of fasterns of suitable size 08 mm dia, 150 mm long by drilling wall and making good to the disturbed surface and matching with existing surface complete all as specified and directed.

S&F 15 mm bore stop valves chromium plated alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or unions and fixed complete all as specified and directed.

S&F 15 mm bore bib tap chromium plates alloy with crutch or butterfly handle screwed down fancy type screwed for iron pipe or brass ferruble and fixed complete all as specified and directed

M&L for earthing complete with galvanized steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.50 m below ground level connected to GI wire 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe light grade for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009 ) and connected to earth test incl testing complete all as specified and directed.

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB of any capacity complete all as specified and directed

M&L for concealed point wiring for the following with 1.5 Sqmm PVC(FR) insulated, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc/square TW Mica Top blocks at junction for batten holders, ceiling rose etc screws, gutti/roul plugs PVC all as per site requirement including MS sunken boxes made out of ms sheet and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green:-

For one light, fan point controlled by one switch

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No 72 here in before but for power point wiring using with 2.5 sqmm PVC (FR)insulated , unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.

S&F switch piano type flush, single pole, one way, 5 Amp 230 Volt complete all as specified and directed

S&F socket outlet , 5 pin, 5 Amp flush, 230 Volt complete all as specified and directed

S&F switch piano type flush, single pole, one way,15Amp 230 Volt complete all as specified and directed

S&F socket outlet 2 in 1, 6 pin, 5/15 Amp ,flush type universal shuttered 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit, 63.5x48 mm three terminal complete all as specified and directed

S&F lamp holder modular type insulated with back plate suitable for Angle/Batten fitting with 9 Watt LED bulb complete all as specified and directed

S&F electronic double space rotary step type 5 speed regulator 120- 280 V complete all as specified and directed

Taking down and refixing connecting ceiling fan complete all as specified and directed

S&F TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj Cat Part No BCLSB 20 WH/ CG Cat Part No LCTC-18-CDL

Supplying and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 10 sqmm, 2 core complete all as specified and directed.

Supply, installation, testing and commissioning portable LED OT Light of manual control panel single dome complete comprising of following specifications. Make:- Ventek Model No.Star 84 mobile/ Ascentech Model No.AT-PL-4/ Bajaj Surgical Model No.-Veego 5 (Mobile) or equivalent make of same specification as approval by GE:-

Technology of Light Emission of OT Light - LED Technology

Diametre of lamp Head in mm with tolerance of + 20 mm - 500

Material of Head Lamp - Aluminium/Polycarbonate non Breakable

Range of light intensity in luminous at 1 metre distance > 140000

Range of colour Temperature in Kelvin - 3500 to 5000

Life Span of LED in hours > 50000 hours

Range of illuminated field dia metre in mm - 120 to 300

Colour rendering index (CRI) > 90

Type of control panel - Manual and Touch Screen

Range of Depth of illumination of OT Light - 60cm to 125cm

No of LED mounted in > 60

Battery backup - 1 hour

Warranty - 2 years

SHIV SHANKAR MISHRA

SAGAR MOTOR AND TRACTOR CO

M/s Vinod Kumar Korpal, Sagar

m/s shivansh traders