Karnataka

Active

Works

Buildings

Renovation of the surgical room at Hebri Community Health Center.

Rural Development and Panchayat Raj Department

RDPR Division Office Udupi | Udupi, Karnataka

Amount: ₹11.4 LCloses: 15 Sept 20265d left

Timeline

Published3 Sept 2026
Closes15 Sept 2026

Tender Value

₹11.4 L

EMD Value

₹28,556

Closing Date

15 Sept 2026, 5:30 pm5d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Executive Engineer PRE Division Udupi

Office Number

Work Description

Renovation of the surgical room at Hebri Community Health Center.

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT29101

Reference Number

RDPR/2026-27/BD/WORK_INDENT29101

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Udupi

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Technical Bid

RequiredRegistration Certificate issued by PWD

RequiredGST Rigistration Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Tenders from Joint ventures are not acceptable.

Conditional Tenders will not be accepted.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee (Min Rs.500/- and Max Rs.7500/-) and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. The tender processing fee is not refundable.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division, UDUPI, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

The work should be executed as per the KTPP Act.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹28,556

Important Dates

Last Activity

4 Sept 2026

Published

3 Sept 2026

Download Ends

7 Sept 2026

BOQ Preview

•

Renovation of the surgical room at Hebri Community Health Center

•

12.5 mm thick PVC Laminated Tile as per IS 2095 part I and laminated with 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed ...

•

Supplying of.........capacity window type air conditioner confirming to IS specification suitable for operation on 230V,50Hz single phase, AC. supply with all accessories. 1.5 Ton capacity 5 Star . Wi...

•

Installation charges for 1to2 Ton capacity window type Air Conditioner with 50x75mm thick teakwood frame of suitable size and allied works complete. With All Lead And Lifts As Per The Direction Of Eng...

•

Supplying and fixing capacitor's (ofapprovedmake) for window/split air conditioners - 25 to 45mfd running capacitor. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

•

Supplying & fixing relay for overload protection for window and splitair conditioners. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double bal...

•

Supplying wall mounting fan suitable to operate at single-phase 230v AC. Supply 300 mm Sweep. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

•

Fixing a ceiling/ Wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of...

•

Wiring for lighting/Power circuit uisng one of FRLS PVC insulated 1100 V Grade, multistrand Copper conductor single core with low conducter resistance single core in open or cncealed system of wiring ...

•

Supplying PVC flexible conduit pipe....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plug sand clamped using heavy gauge saddles at an interval of 300mm using NF s...

•

Fixing all types and all capacities of fluorescent / false ceiling spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires, ...

•

Supplying and fixing of slim box fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4' Tube light fitting. With All Lead An...

•

Supplying and fixing/replacing of fluorescent tube. 65 to 80W With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...

•

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Providing, fabricating, assembling and fixing in position aluminium partitions using aluminium sections of mat finish or glassy finish in combination of plain grove, single grove and double grove a...

•

Providing, fabricating, assembling and fixing in position aluminium shutters to the existing door frame in the partition using 47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vert...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and Fixing Cudddapah slab 2.5cms thick . With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

•

White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers. With All Lead And Lifts As Per The Direction Of Engine...

•

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be mad...

•

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-1.docx

Tender Document • 0.08 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .