Repair/Renovation of Guard Hut at Chowgund Verinag Range. Anantnag Forest Division.

Amount

Dismantling/Scrubbing of Damaged Flooring in Bathroom Verendah etc including diposal of the dismantled material : Labours

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Providing and laying of dry stone soling packed tightly incl ramming watering and filling of interstices incl all carriages complete job.

Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone incl.all carriages complete a) Soak Pit

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in :

Septic Tank

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 25mm thick with 12.5 mm nominal size stone aggregate.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 500x500 mm

Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. Same as calculated in Interior walls plaster,with 10% in jambs and ceiling.

Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work.

Renewing glass panes and re-fixing existing wooden fillets, fixing of new panels where necessary float glass panes of thickness 4.0mm

Steel Work in GrillWork in windows and verendah complete job.

SANITRAY & WATER SUPPLY

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040x bowl depth 178mm

Providing and fixing of mirror of superior quality with all fittings and fixtures complete.

Providing and Fixing PPR pipe lines of approved quality and brand in walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/elbows/unions/ sockets etc wherever required of following nominal sizes

25mm dia

20mm dia

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Health fucet

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing ball valve (brass) of approved quality, with all fittings and fixtures complete.

25 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing gun metal gate value C.I wheel of approved quality (Screwed end )25mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing of Towel rail of superior quality with all fittings and fixtures complete.

Providing and fixingof Gyser Venus make ISI 50litre Capacity with all necessary fittings.

Providing and fixing Polyvinyl Chloride (PVC) pipes, incl all PVC plain fittings This includes jointing of pipes ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work

75 mm nominal dia .Pipes. Vent pipe

75 mm nominal inner dia .Pipes.

100mm nominal inner dia .Pipes.

Providing and fixing Polyvinyl Chloride (PVC) fittings for pvc pipes

P-Trap

100mm door tee

100 mm bend with door

100 mm bends

100 mm TEE

100 mm Connector

75mm Flow Trap with jali

75mm Door Tee

75mm bend with door

75mm Bend

75mm Connector

75mm Tee

Reducer 100mm x 75mm

Vent Cap 75mm

Provision for electric fitting in rooms inl service line.

M/S SHABIR AHMAD TAK