Construction of an additional Sump Tank (3 Lakh Liters capacity) beside the Overhead tank at VTU, Jnana Sangama, Belagavi.

Construction of an additional Sump Tank (3 Lakh Liters capacity) beside the Overhead tank at VTU, Jnana Sangama, Belagavi.

Cutting of Trees, excluding removal of stumps and roots of trees Girth above 1800 mm

Removal of stumps and roots including backfilling with suitable material to required compaction Girth above 1800 mm

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

For PCC Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

For Footing Providing and laying in position Cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevan...

Formwork, Centering & Scaffolding for Sl No 1 a: Foundation upto plinth Isolated As per Addendum-I in Volume-1 of page No 111 (at 8 percentage of Finished Rate. Providing and laying in position C...

For RCC wall - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3...

Formwork, Centering & Scaffolding for Sl No 09: RCC Columns / Shaft (Slip Centering) As per Addendum-I in Volume-1 of page No.112 (at 70 percentage of Finished Rate) Providing and laying in position C...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

For Slab - Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Formwork, Centering & Scaffolding for Sl No 15 : Roof slab of Buildings As per Addendum-I in Volume-1 of page No. 112 (at 50 percentage of Finished Rate) Ground Floor Providing and laying in position...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Finishing walls with water proofing cement paint of required shade : New work (Two coats applied at 4.84 kg per 10 m square) to give an even shade after thoroughly brooming the surface to remove all d...

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments 7.5 HP, size 65x50 Head 46M, Discharge 360 LPM

Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. Upto 7.5 HP centrifugal pump

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984and virgin...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Providing & fixing 455 x 610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs) and necessary locking arrangements with M.S flats 32x6 mm etc...

Providing and fixing Unplasticised PolyvinylChloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC...

Providing and fixing Unplasticised PolyvinylChloride (uPVC) pipes,for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC...