REPAIR/MAINT OF SMOKE DETECTOR AND FLAME DETECTOR INFRASTRUCTURE WITH OTHER CONNECTED WORKS AT 24 ED

Taking down old unserviceable Switch power supply (SMPC) of Control Panel make Honeywell Morleyor as per sample and supply and fixing Switch power supply (SMPC) input 100-240 V out put 24 V, 1.3 to 2 Amp, operating temprature -10 degree to + 50 degree C, closed housing with protection against mains AC, short circuit protection in-built filter against EMC interference complete all as specified & directed.

Taking down old unserviceable detector base and supply and fixing analogue Addressable detector base advanced protocol and smoothing filter to suppress false alarm maintain loop connectivity complete all as specified & directed.

Taking down old unserviceable Heat detector and Supply, Installation, testing and commissioning addressbale sensor type certified to EN 54 part 1, 58 degree addressable type microprocessor based, programable inteligent type, blue light opticle thermal heat detector with detector base, advanced protocol and smoothing filter to suppress false alarm, rotary decade switches, in-built isolator, dual Integrated LED for 360 degree visibility, LPCB approved, environment friendly-meets WEEE & RoHS legislative requirements, operating voltage 15 to 32 Vdc complete including necessary connection complete all as specified & directed.

Supply, Installation, testing and commissioning in replacement addressable sensor type certified to EN 45 addressable type microprocessor based, programmable intelligent type, blue light optical smoke detector with detector base, advanced protocol and smoothing filter to suppress false alarm, rotary decade switches, in-built isolator, dual Integrated LED for 360 degree visibility, conforms to EN 54-7, LPCB approved, environment friendly-meets WEEE & RoHS legislative requirements, operating voltage 15 to 32 Vdc complete including necessary connection complete all as specified & directed.

Supply, Installation, testing and commissioning in replacement addressbale intelligence having inbuilt microprocessor, memory and decision alogrithm twin angle with both forward and backward light scattering mechanism cum thermal multicriteria detector (sensor) with heat and smoke combination (multi detector) confirms EN54-5 & FN 54-7 LPCB approved complete all as specified & directed.

S&F in replacement maintenance free battery of capacity 12 Volt 7 AH, VRLA AGM type including standard spade terminals connecting and testing at site complete with one year warranty including taking down old unsv battery complete all as specified & directed.

Taking down old unsv PCB of main Control panel of fire alarm and supply and fixing of new PCB of existing make complete all as specified & directed.

S&F in replacement ONLINE UPS 1 KVA (1000 VA) 6 Volt pure sinewave without in-Built batteries,40-50 Min backup, inbuilt OVCD (over voltage Cut off Device) with surge protection, efficient micro controller based, advanced PFC technology, static bypass-improves reliability, over temprature indication and protection, generator compatible, boost function for low input over voltage protection Extended input voltage range of 135 to 300 volt UPS to battery backup mode including wall mounted stand for UPS suitable sizecomplete all as specified & directed. Note: Old unserviceable UPS should be deposited to MES Store yard.

M&L in replacement sub main wiring with two run of single core PVC FRLS IS-694 cable with multi stranded copper conductor of size 1.50 Sqmm and drawing through in PVC medium grade heavy duty conduit pipe on surafce of wall with using 1.50 Sqmm PVC insulated unsheathed multi stranded copper conductor cable connected to earth and earth dolly in conduit including conecting to main board including PVC conduit heavy duty minimum 20 mm dia size complete all as specified & directed. NOTE : (i) One run of conduit with three run of copper cable in equal size shall be measured against one unit.

Taking down any type of detector and clean properly with help of air blower and after cleaning fixed in existing position complete all as specified & directed. Note : T&P (ladder, Air blower, etc) shall be arranged by the Contractor under own cost and arrangement.

Supply, Installation, testing and commissioning in replacement floor/surface mounting addressable microprocessor fire alarm control main control panel single loop with BS EN 54 and indicating panel sounder circuits complete with LCD Display and push button to acknowledge alarm, testing and reset suitable for operation 230 volts single phase 50 Hzs AC supply 24 V DC supply with suitable capacity charger maintenance free batteries and battery charger,compatable with detector for communication to detectors and 2 x 16 character LCD, confirming to IS : 2189 and BSEN 54 of capacity from 99 detector and 99 module devices upto 200 detector single loop 6*4' character 2 sounder circuits PTR requires network card and modules (per each loop) etc including making all connection and fixing accessories complete all as specified & directed.

Supply, install, testing and commissioning in replacement conventional electronic speaker cum hooter with range of 25-30 meter with output not less than 4 watt including necessary connection complete all as specified & directed.

Taking down old unserviceable siren and supply and fixing Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured with sound output variation of +5 DB 500 mtrs range complete all as specified & directed.

S&F in replacement addressable control unit for siren complete all as specified & directed.

Supply and fix addressable type Manual Call point resettable type compatible with main fire alarm control board microprocessor based as per IS-2189 complete all as specified and directesd.

Taking down old unserviceable cable and Supply and laying for XLPE insulated PVC innersheathed, armoured, LT control cable FRLS multistranded copper conductor, 1100 volts grade, cross-sectional area 2.50 Sqmm 4 core as per IS 7098 (Part I) 1988 complete all as specified & directed.

S&F in replacement AFO (Auto fire off) plastic fire extinguisher ball (orange colour) it can self active in the presence of fire, active within 3 to 5 seconds upon reaching the appropriate temprature and extenguish the fire, maintenance free for period 5 years, completely harmless to the human body, area cover 360 degree angle, area of about 70 to 80 sqft, it can be extinguish three classes of fire, solid, Liquid and electrical classes of fire, weight 1.50 Kg, 100% eco friendly, 100% bio-degradable along with fixing on wall accessories complete all as specified & directed.

S&F in replacement Fire extinguisher spray foam type 500 ml aluminium body with stand, spray which contain chemical solution that works immediately on touch to keep small from growing dangerously out of control complete all as specified & directed.

S&F in replacement Eco fire ABC powder type 6 Kg fire extinguisher (red and black) effective for all type of fire with wall mount hook, ISI/ BIS marked, ISO & CE certified multipurpose use with 5 year warranty portable complete all as specified & directed. Make :-"Eco Fire / AMEREX / Kidde"

S&F in replacement Eco fire ABC powder type 9 Kg fire extinguisher (red and black) effective for all type of fire with wall mount hook, ISI/ BIS marked, ISO & CE certified multipurpose use with 5 year warranty portable complete all as specified & directed. Make :- "Eco Fire / AMEREX / Kidde"

Taking down old foam of fire extinguisher and refilling of ABC powder type, CO2 fire extinguisher, foam type fire in extinguisher cylinder complete all as specified & directed. (Note : Contractor shall be provide all safety equipment to the person which is refill the Cylinder)

Supply, Installation, testing and commissioning in repair Net work card for integration of fire alarm Panels to repeater panel into a net worked system complete as per existing fire alarm infrstrucure system for smooth operation/forformance complete all as directed by engr-in-charge.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

Please Enable Macros to View BoQ information