Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC L1 | |
| 2 | L2₹25.5 L+₹78,821 (3.19%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹29.0 L+₹4.2 L (17.2%)Rejected-Finance TP 117 2ND FLOOR MAURYA ENCLAVE PITAMPURA DELHI 110034 | DELHI | DELHI | DELHI | 110034 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹30.9 L+₹6.1 L (24.9%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
10 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NO 2 DELHI CANTT-10
HQ CWE NO 2 DELHI CANTT-10
REPAIR/MAINTENANCE OF FIRE HYDRENT SYSTEM PIPES MOTOR/PUMPS AND OTHER CONNECTED WORKS AT RESTRICTED AREA UNDER GE SOUTH WEST NEW DELHI
2023_MES_616889_1
CWE/SW-10/2023-24
Limited
Civil Works - Others
Item Rate
180 days
RESTRICATED AREA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SOUTH WEST NEW DELHI
₹59,000
17 Nov 2023
2 Sept 2023
11 Oct 2023
2 Sept 2023
10 Oct 2023
16 Sept 2023
Amount
Supply, laying, fixing and testing in replacement of heavy duty MS Pipe conforming to IS: 1239/3589 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. including welding, cutting, and grinding works, laid in trenches, or fixing in wall, ceiling and floor complete and making good the disturbed surface similar to existing/excavation & providing cement concrete blocks as supports, anticorrosive treatment with coal tar/asphalt tape and painting with two or more coats of synthetic enamel paint of post office red colour as per IS- 10221, in and including disconnected/dismantaling and taking out of rusty/damaged MS pipes of 200 mm bore ( wall thickness 6.0 mm) size complete all as specified and as directed.
All as per item srl No. 1.00 here-in-before but 150 mm bore (wall thickness 5.4 mm)
All as per item srl No. 1.00 here-in-before but 100 mm bore (wall thickness 5.4 mm)
All as per item srl No. 1.00 here-in-before but 80 mm bore (wall thickness 4.85 mm)
Supply, laying, fixing and tested in replacement of heavy duty G.I. pipe conforming to IS: 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. in and including cutting, welding and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of post office red color in and including disconnected/dismantaling and taking out of rusty/damaged GI pipes complete all as specified and as directed of 40 mm bore size.
All as per item srl No. 5.00 here-in-before but 25 mm bore.
All as per item srl No. 5.00 here-in-before but 20 mm bore.
Supplying, fixing and testing in replacement of double flanged butterfly valve of PN 1.6 rating, CI , gear/hand lever operated, with soft seated wafer, bronze/gun metal seat and SS 304 shaft duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes complete all as specified and as directed by EIC of 200 mm dia size.
All as per item srl No. 8.00 here-in-before but 150 mm dia
All as per item srl No. 8.00 here-in-before but 100 mm dia
All as per item srl No. 8.00 here-in-before but 80 mm dia
Supplying, fixing and testing in replacement of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with matching flange, nuts, bolts, washers, gaskets and conforming to IS: 780 of following sizes complete all as specified and directed of 200 mm dia size.
All as per item srl No. 12.00 here-in-before but 150 mm dia.
Supplying, fixing and testing in replacement of C I, double flanged butterfly non return valve (butterfly type) of rating PN 1.6 with Stainless steel disc and nitrel stem, ISI marked complete with matching flange, nuts, bolts, washers, gaskets and complete all as specified and directed by EIC of 200 mm dia size as required.
Supplying, fixing and testing in replacement of double flanged butterfly non return valve (sluice type) of rating PN 1.6 with Stainless steel ball, ISI marked complete with matching flange, nuts, bolts, washers, gaskets and complete all as specified and directed by EIC of 150 mm dia size as required.
Supplying, fixing and testing in replacement of C I, double flanged butterfly non return valve (butterfly type) of rating PN 1.6 with Stainless steel disc and nitrel stem, ISI marked complete with matching flange, nuts, bolts, washers, gaskets and complete all as specified and directed by EIC of 80 mm dia size as required.
Supplying, fixing and testing in replacement of unserviceable gun metal branch pipe, short type, instantaneous pattern to suit hose delivery coupling of size 63 mm bore complete with gun metal solid jet nozzle of 20mm nominal size confirmin to IS:903 complete all as specified and directed.
Supplying, fixing and testing in replacement of unserviceable fire hydrant flanged type landing valve, oblique type, single outlet with hose coupling adaptor of size 63 mm bore made of gun metal with female mouth and cast iron wheel and instantaneous spring lock, blank cap with chain confirming to IS:5290 complete all as specified and as directed.
Supplying, fixing and testing in replacement of unserviceable fire hydrant flanged type landing valve, oblique type, double outlet with hose coupling adaptor of size 63 mm bore made of gun metal with female mouth and cast iron wheel and instantaneous spring lock, blank cap with chain confirming to IS:5290 complete all as specified and as directed.
Supplying, fixing and testing in replacement of unserviceable synthetic fibre circular woven seamless reinforcement jacketed coupling with type- II (reinforced rubber lined type), flexible fire hose made of 100% synthetic yarn, circular shaped of size 63 mm bore x 15 mtr long, complete with gun metal coupling of 63mm, with multi serrated tail and double instantaneous spring lock arrangment comprising of heavy duty pair of gun metal male and female parts, hydraulically crimped to hose with rubber cap washer and copper binding wire confirming to IS: 903 and ISI marked complete all as specified and as directed.
Supplying, fixing and testing in replacement of unserviceable swinging hose reel comprising of ply rubber hose of size 20mm(3/4"), 15m long tested with 25kg/cm²/350 psi bursting pressure with wall mounted mild steel pressed reel with 180º angle swinging with non-jamming contolling handle which shall stay at the ON/OFF position as set, wall bracket with 'U' shaped reel carrier made of CI of post office red colour finish including gun metal globe and shut off ball valve, heavy duty confirming to IS: 884 and ISI marked complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable internal hydrant coupling/ tikki rubber washer 4mm thick of size 12 mm inner diameter and 72 mm outer diameter complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable hydrant PVC valve blank cap with SS chain of size 63 mm, round shape, pull and push type complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable CI hydrant valve hand wheel, round shape, with bolt, nut & washer as per existing size complete all as specified and as directed.
Supplying, fixing and testing Air vessel made of 450 mm dia, 8 mm thick MS sheet, 1000 mm in height complete with gun metal air release valve on top and flanged connection to riser with gun metal shut off valve at the inlet, drain arrangement with 25 mm dia gun metal drain valve with required accessories, stainless steel pressure gauge and 3 nos mild steel supporting legs in and including painting with synthetic enamel paint of post office red coloured over two coat of red oxide primer on outside and two coat of epoxy coating inside complete all as specified and as directed.
M&L for painting of Air vessels with one coat of red oxide primer and two coats of red post office synthetic enamel paints on all external steel surface after throughly cleaning/scraping of old paints, rust and scale etc.before applying the primer complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable gun metal air release valve with GI coupling of Air vessels of size 25 mm, screwed type complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable forced brass ball valve for inlet & drain of Air vessels of size 20 mm, screwed type complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable bourden type with ball valve pressure gauge of 4" dial duel scale type 0 - 14 kg/cm² & PSI, stainless steel casing, screwed type complete all as specified and as directed.
Supplying and fixing in replacement of unserviceable Pressure switch in and including PVC insulated copper conductor FRLS flexible cable with copper themble of suitable size upto control panel complete all as specified and as directed.
Supplying and install in replacement yard fire hydrant box, outdoor type of internal size not less than 100 X 115 cm and 75 cm width, made out of 14 SWG thick CRCA mild steel sheet, factory made, totally enclosed with front side hinged openable cover with locking arrangement and pad lock duly painted with two coat of red post office colour synthetic enamel paint on outside surface and white colour paint on inside surface over a coat of red oxide primer comprising 4 mm thick glass window of size not less than 76 X 76 cm on front side openable cover inscribed with word 'FIRE' (5 inch size) with post office red synthetic enamel paint. The box to be installed on brick pillar foundation with suitable size of MS foundation bolt grouting in and including dismantling corroded/worn out yard fire hydrant box from brick pillar foundation complete all as specified and as directed.
All as per Serial No 31.00 here-in-before but indoor type of internal size not less than 105 cm x 142 cm x 84 cm complete all as specified and as directed.
All as per Serial No 31.00 here-in-before but out door type of internal size not less than 110 cm x 145 cm x 80 cm complete all as specified and as directed.
Supply & fixing in replacement of broken glass window size not less than 76 cm x 76 cm x 4 mm thick in yard fire hydrant box inscribed with word 'FIRE' with red post office colour synthetic enamel paint as per existing pattern complete all as specified and as directed.
M&L for fittings for flanged pipes such as Bends, Tapers, Tee Pieces (Single & double branch) any type and angle/radious and straight connecting pieces but all ends flanged complete all as specified and as directed.
M&L for dismantling and taking down corroded/worn out base frames/pit covers, any type of water supply/fire fighting installations and supply and fix new base frames/pit covers. MS angle iron frame /MS plates/MS flat or round bars including welding work,duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for painting up to 200 mm bore New MS/GI pipe with one coat of red oxide primer and two coats of red post office synthetic enamel paints on all external steel surface after throughly cleaning/scraping of old paints, rust and scale etc.before applying the primer complete all as specified and as directed.
M&L for painting of MS fire hydrant box Indoor/outdoor type of internal size not less than 97x105x60cm after throughly cleaning/scraping of old paints, preparation of surfaces with emery paper as per existing colour code duly painted with two coat of red post office colour synthetic enamel paint on front of outside surface and white colour paint on inside surface over a coat of red oxide primer comprising 4 mm thick glass window inscribed with word 'FIRE' (5 inch size) with red synthetic enamel paint and numbering of box complete all as specified and directed.
M&L for cleaning of fire pipe line duct/trench size not less than 1.50 m width and 50 cm dipth after removing of MS Cover by removing/taking up dirty water alongwith sludge and disposal the same to a safe distance including scrubbing of the internal surfaces and refixing of MS Cover complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deepth in Hard/Dense Soil complete all as specified and directed
Returning filling including leveling,watering and well ramming soil in layers not exceeding 25 cm thick all as directed.
Removing the excavated materials not exceeding 50 m and depositing where directed at level not exceeding 1.5 m above the starting level.
M&L for demolition of brick work built in cement mortar of any Description and removing rubbish complete all as specified and directed. Note:- Demolised materials shall be removed out of Cab Sectt land on the same day other wise penalty @ Rs. 500 Per Day will be imposed.
M&L brick work in 1:6 using sub class 'B' brick straight or curved on plan exc 6 m mean radius complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm grade stone aggregate and finishing even and without using extra cement complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm grade stone aggregate and finishing even and without using extra cement complete all as specified and directed.
M&L for 100 mm thick cement concrete type B-2 1:2:4 (40 mm graded aggregate in sub-based sub-floors'floors and paving etc complete all as specified and directed.
M&L for 15 mm thick rendering on brick surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for chequred cement tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement scred base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for making insertion under road without cutting of road for laying of MS/GI pipe line up to 200 mm bore by using mechanically operated machine complete all as specified and directed. Note : (i) Works are to be carried out in multistoried bldg from basement to 11 th story as and where required. (ii) All T&P item/scap folding as required at site will be arranged by the contractor at no extra cost.
S&F in replacement of U/S Sprinkler glass bulb type (Standard response) as per IS:15106/TAC guidelines 68 degree temperature rating concealed type complete all as specified and as directed.
M&L for taking out/ collected empty Fire Extinguisers of any type and capacity from various locations send to authorized distributor for refilling and re-fixing the same in proper position and location as per the requirement of the location and type of fire extinguisher in and including transfortation complete all as specified and as directed.
S&F in replacement of U/S threaded GI nipple 15mm dia, 'heavy grade' length not less than 600mm as per site with GI sockets complete all as specified and as directed.
M&L for Refilling of fire extinguishers with ABC dry chemical powder and pressurization of fire extinguisher with fresh/sufficient quantity/quality, ABC Dry chemical powder as per IS: 14609:1999 and shall contain 90% Mono Ammonium Phosphate and pressurized with Nitrogen Gas in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities complete all as specified and as directed. A dry chemical Hydraulic Pressure testing should be as per IS-2190-2010 and test certificate shall be submitted and shall be valid for further three years complete all as directed of 10 Kg capacity cylinder. Note: Any fire extinguiser cylinder will be failing in hydraulic test will be return in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
All as per item srl No. 55.00, here-in-before but 5 Kg ABC Powder type Fire Extinguisers
All as per item srl No. 55.00, here-in-before but 4 Kg ABC Powder type Fire Extinguisers
M&L for Refilling of fire extinguishers with Carbon dioxide (CO2) and pressurization of fire extinguisher with fresh/sufficient quantity/quality, Carbon dioxide shall be as per IS: 15222:2002 with minimum gas purity shall be 99.5 % in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities complete all as specified and as directed. Carbon dioxide fire extinguishers shall be tested as per IS: 5844-1970 and test pressure shall be 250 kg/ cm2 (as per the IS 2190:2010 ) and test certificate shall be submitted and shall be valid for further five years complete all as directed of 4.5 Kg capacity cylinder. Note: Any fire extinguiser cylinder will be failing in hydraulic test will be returned in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
All as per item srl No. 58.00, here-in-before but 2 Kg Carbon dioxide (CO2) type Fire Extinguisers
M&L for Refilling of fire extinguishers 9 kg with water CO2 type and pressurization of fire extinguisher with fresh/sufficient quantity/quality, Carbon dioxide shall be as per IS: 15222:2002 with minimum gas purity shall be 99.5 % in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities complete all as specified and as directed. Carbon dioxide fire extinguishers shall be tested as per IS: 5844-1970 and test pressure shall be 250 kg/ cm2 (as per the IS 2190:2010 ) and test certificate shall be submitted and shall be valid for further five years complete all as directed of following capacity cylinders: Note: Any fire extinguiser cylinder will be failing in hydraulic test will be returned in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
M&L for Refilling of fire extinguishers 9 Kg with AFFF foam type and pressurization of fire extinguisher with fresh/sufficient quantity/quality, AFFF Foam as per IS: 4989 and shall contain with 95% effective discharge and 15 Kgf/cm² chare pressure in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities complete all as specified and as directed. Hydraulic Pressure testing should be as per IS-2190-2010 and test certificate shall be submitted and shall be valid for further three years complete all as specified and as directed. Note: Any fire extinguiser cylinder will be failing in hydraulic test will be returned in AGE E/M Cab Sectt yard and nothing extra will be paid for this to the contractor.
S&F in replacement of U/S brass discharge valve wheel type with working pressure not less than 150 Kg/cm² confirming to IS: 3224 suitable for CO2 type fire extinguishers of capacity 4.5 Kg and 2 Kg complete all as specified and as directed.
S&F in replacement of U/S discharge hose made out of wire braided rubber of ID not less than 10mm and lenth not less than 1 mtr or as per existing size with horn, confirming to IS: 3224 suitable for CO2 type fire extinguishers of capacity 9 Kg / 4.5 Kg and 2 Kg complete all as specified and as directed.
S&F in replacement of CO₂ fire extinguisher plastic round shape 2mm thick security seal with GI chain and safety pin suitable upto 9 Kg / 4.5 Kg and 2 Kg cylinders complete all as specified and as directed.
S&F in replacement of U/S taflon/nylon washer with OD-19mm, ID- 9mm or as per existing size, thichness 3mm including rubber 'O' ring of size 25 x 3.5 mm complete all as specified and as directed.
S&F in replacement of U/S squeeze grip type valve, heavy duty with MS control handle and ss lock/pull pin with chain confirming to IS: 15683 (2006) suitable for ABC type fire extinguishers of capacity 10 Kg, 5 Kg and 4 Kg complete all as specified and as directed.
S&F in replacement of U/S discharge wire braided rubber hose with brass shut off nozzle, length of the flexiblehose not less than 1 mtr or as per existing, confirming to IS: 15683 (2006) suitable for ABC type fire extinguishers of capacity 10 Kg, 5 Kg and 4 Kg complete all as specified and as directed.
S&F in replacement of U/S analog type spring brass fire extinguisher pressure gauge, 1" dial suitable for measuring 0 to 50 bar duly calibrated by standard method confirming to IS: 15683 (2006) suitable for ABC type fire extinguishers of capacity 10 Kg, 5 Kg and 4 Kg complete all as specified and as directed.
M&L for taking out electrical driven fire pump of capacity 60 HP make: Kirloskar after disconnected all electrical and water connection and disassembling form base and uncoupling motor shaft coupling and taking and transport to work shop & opening carefully and servicing complete with replacing of bushes/bearings, gland packing, seals, oil rings, rubber gasket, nut, bolt & washers in and including re-metaling/machining work for shaft if required and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete all as specified and as directed. Note :- (i) T&P items and any other minor items required for installation and commissioning of electric motor will deemed to be including in the quoted rates. (ii) Any electric connection,nut, bolts,washers,flanges including welding and cutting work will deemed to be including in quoted rates. (iii) Replacement of damage/warnout impellor & ball bearing shall be measured and paid separately.
All as per item srl No. 69.00, here-in-before but Jokey pump of capacity 15 HP make: Kirloskar
Supply only Ball bearing (as existing) suitable for centifugal pump & motor of capacity 60 HP.
Supply only Ball bearing (as existing) suitable for centifugal pump & motor of capacity 15 HP.
Supply only Bronze Impeller (as existing) suitable for centifugal pump of capacity 60 HP.
Supply only Bronze Impeller (as existing) suitable for centifugal pump of capacity 15 HP.
M&L for disconnecting electrically and mechanically defective induction electric motor of capacity 60 HP electrically operated three phase 415 volt,shifting to civil workshop for repair,strip opening for inspection,cutting of unserviceable burnt winding, taking out,cleaning of slots,rewinding with new super enameled ,of existing size of copper conductor winding wire and replacement of unserviceable burnt insulating materials,sleeves etc,varnishing and with two coats of synthetic enamel paint of superior quality after scraping, cleaning and preparation of old painted surfaces complete repainting two cote new and other connected works,re-assembling,re-fixing at site,electrical connection fixing with pump set with nuts,bolts,washers as per original position and testing complete all as directed for satisfactory operation complete all as specified and as directed. Note :- (i) T&P items and any other minor items required for installation and commissioning of electric motor will deemed to be including in the quoted rates. (ii) Any electric connection,nut, bolts,washers,flanges including welding and cutting work will deemed to be including in quoted rates. (iii) Replacement of damage/warnout ball bearing shall be measured and paid separately.
All as per item srl No. 75.00, here-in-before but of capacity 15 HP.
Supply only Ball bearing (as existing) suitable for centifugal pump of capacity 60 HP.
Supply only Ball bearing (as existing) suitable for centifugal pump of capacity 15 HP.
S&F in replacement of Tyre coupling suitable for 60 HP centrifugal Pump set made out of FRAS neoprene rubber tyre and steel hub with nuts & bolts complete all as specified and as as directed. Note: Contractor should check the existing pump shaft size at site before procurement of tyre coupling.
All as per item srl No. 79 here-in before but suitable for 15 HP centrifugal Pump set.
S&F in replacement of MCCB, Four pole, 250 Amps, 36KA,,415 Volts (Ics=100% of Icu) with microprocessor release suitable for existing frame size of LT panel complete all as psecified and as directed.
S&F in replacement of MCCB Three pole 125 Amps, 25KA, 415 Volts (Ics=100% of Icu) with thermal magnetic release suiable for existing frame size of LT panel complete all as specified and as directed.
S&F in replacement of MCCB Three pole 100 Amps, 16KA, 415 Volts (Ics=100% of Icu) with thermal magnetic release complete all as specified and as directed. .
S&F in replacement of MCB Three pole 40 Amps, 10KA, 415 Volts, 'C' curve complete all as specified and as directed.
S&F in replacement of 3 pole Power contactor, 3 phase, 415 volts, 50 Hz for star delta startor suitable of 60 HP pump including front mounting add-on auxiliary contact block, Model No. TC1-D8011, Make-C&S or equivalent make as specified in list of makes complete all as specified and as directed. .
S&F in replacement of 3 pole power contactor, 3 phase, 415 volts, 50 Hz including front mounting add-on auxiliary contact block Model No. MNX 50 of L & T or equivalent make specified in List of makes.
S&F in replacement of Overload relay with trip class 30 suitable for range 63-100 Amp, Model No. TR6F100 Make: C&S or equivalent make as specified in list of makes.
S&F in replacement of Overload relay suitable for range30-50 Amp, Model No. MN5 of L & T or equivalent make specified in List of makes.
S&F in replacement of electronic timer, 3 phase, 240/415 volts, 50 Hz, 1 to 30 second Modal No. TA2-DS2 of Make-C&S or equivalent make as specified in list of makes.
S&F in replacement of electronic timer, 3 phase, 240/415 volts, 50 Hz, 3 to 30 second Modal No.ST 100 of Make-L&T or equilent make as specified in list of makes.
S&F in replacement of analog ammeter, 96x96 mm size with measuring range 0-300A , AC, three phase, class accuracy 1.5 suitable for panel mounting complete all as specified and directed.
S&F in replacement of analog ammeter, 96x96 mm size with measuring range 0-150A , AC, three phase, class accuracy 1.5 suitable for panel mounting complete all as specified and directed.
S&F in replacement of analog ammeter, 96x96 mm size with measuring range 0-100A , AC, three phase, class accuracy 1.5 suitable for panel mounting complete all as specified and directed.
S&F in replacement of analog voltmeter, 96x96 mm size with measuring range 0-500VAC, three phase, class accuracy 1.5 suitable for panel mounting complete all as specified and directed.
S&F in replacement of current transformer (CT) of capacity 100/5A, cast resin ring type with burden 15 VA and accuracy class 1 suitable for panel mounting complete all as specified and as directed.
S&F in replacement of Phase indicating lamp, LED type, RED/BLUE/YELLOW/GREEN, 22.5 mm Ø, surface mounted, 240V AC suitable for panel mounting complete all as specified and as directed.
S&F in replacement of PVC insulated two core unsheathed, multistrand copper conductor flexiable cable 2.5 Sqmm, FRLS conforming to IS-694:1990 in and including copper thimbles as per site required suitable for panel wiring complete all as specified and as directed.
M&L for painting of Auditorium curtains, chairs and doors with high quality fire retardant paint through spry gun complete all as specified and as directed.
M&L for tacking down wall mounted mannual brass fire bell of any size from varrious locations of E, F, D and CRF area and dismantling carefully all connected parts, chrome polished, gressing after proper cleaning of all matel parts and replaced old warnout pull rope with 1" dia hand- braided red rope, re-assemble and hannging on wall bracket in and including painting of wall bracked with two coats of synthetic enamel paint of approved colour and marking on 'FIRE' complete all as specified and as directed.
S&F in replacement of fire extinguisher mounting bracket suitable upto 2 kg to 10 kg cylinders duly fixed in wall with MS fastner/GI Screw complete all as specified and as directed.
SETHI ENTERPRISES
GLIBS CONSTRUCTION
JIWAN DASS THAREJA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .