ED/Crematorium/14/25-26

tripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. [Ref:P.W.D.(Bldg.). Page- 11, Item-10]

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof. [Ref:P.W.D.(Bldg.). Page- 10, Item-2.(a)]

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. [Ref:P.W.D (Bidg). Page-12, Item No-13]

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor [Ref:P.W.D (Bldg.), 3rd Corri Page -1, Item-3]

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL [Item No.-40(I), Page No.-44]

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout propsand thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (b)Above 30 mm & upto 37 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge Item No.-36(b), Page No.-42

Ordinary Cement concrete (mix1:1.5:3) with graded stonechips (20 mm nominal size) excluding shuttering and reinforcement ifany, in ground floor as per relevant IS codes. (i) Pakur Variety Item No.-3, Page No.-47

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(b) 20 mm thick plaster. [Ref:P.W.D (Bldg.),3rd Corri.,Page -50, Item-1/ii/b

Neat cement punning on cement plaster surface. [Ref : P.W.D.(Bldg.), Page -192, Item-15]

Supplying & laying 3 mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1& ASTMD5147 manufactured with atactic poly propylene (APP )modified premium grad asphalt ,speciallyreinforced with non-woven polyester core with polyester reinforcement @160gms per sqm & both faces covered with thermo-fusible polyethylene film/Minera Lon top face over a coatof primer@ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface preparedwherever required.Lap joint shall be provided of 75 mm in longitu dinal&100mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer-in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.) [Ref : P.W.D.(Bldg.). Page- 92, Item-4.]

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). [Ref : P.W.D.(Bldg.). Page- 198, Item-5]

supplying, fitting, fixing approved quality asbestos cement quality down pipe inpositin with necessary clamps,nailsin cluding making holes in wall, floor etc.and cutting trench esinany soil or through masonry,concret e structures etc. if necessary and mending good damages including jointing materials complete (i) 76.2 mm Dia [Ref : P.W.D.(Bldg.). Page- 210, Item-11]

Supplying, fitting&fixing1st quality Ceramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby synthetic adhesive & grout materials etc. (A) Floor WithSandCementMortar (1:4) 20mmthick&2mmthick cement slurry at back side of tiles using [email protected] Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m

(B) Wall WithSandCementMortar (1:3) 15mmthick&2mmthick cement slurry at back side of tiles using [email protected] Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats [Ref : P.W.D.(Bldg.). Page- 196, Item-8]

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all a) Normal Acrylic Emulsionof primer.incidental charges but excluding the cost a) Normal Acrylic Emulsion [Ref : P.W.D.(Bldg.). Page- 197, Item-17.a]

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. [Ref : P.W.D.(Bldg.). Page- 201, Item-1.a.]

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (hi-gloss)-With any shade except white. b) On Steel surface Two Coats [Ref : P.W.D.(Bldg.). Page- 201, Item-2.a.b.iv]

Add GST 18%

Add LWC 1%