Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹37.2 L+₹4.5 L (13.7%)Rejected-Finance | L2 | Rejected-Finance Being Other Than Lowest | |
| 3 | L3₹40.0 L+₹7.3 L (22.3%)Rejected-Finance | L3 | Rejected-Finance Being Other Than Lowest | |
| 4 | L4₹42.7 L+₹10.0 L (30.5%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L4 | Rejected-Finance Being Other Than Lowest | |
| 5 | L5₹43.3 L+₹10.5 L (32.1%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L5 | Rejected-Finance Being Other Than Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
EXTERNAL PERIODICAL SERVICE INCLUDING REPAIR TO BROKEN CHAJJA, EXTERNAL PLASTER TO BLDG IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
2022_MES_537751_1
GE/DE-16/2022-23
Open Tender
Coal Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹96,000
Yes
17 Sept 2022
13 Jul 2022
19 Aug 2022
13 Jul 2022
17 Aug 2022
3 Aug 2022
Amount
M&L for preparation of old decoreated external wall / Ceiling surface of existing treatment by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying and applying two coats of weather proofing exterior acrylic emulsion paint over priming coat premium quality over wall / ceiling complete, including applying 2mm thick wall care putty over disturbed surface during preparation or any reason, complete all as specified and as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. (Make : BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL))
M&L for preparation of old decoreated external wall / Ceiling surface of existing treatment by scrapping with True Care Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible for above 4 to 9 storey building and applying 2 mm thick wall care putty and again sand papering thus making surface smooth and applying two coats of weather proof exterior acrylic emulsion paint premium quality over priming coat on wall / ceiling surfaces complete all as specified and as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. (Make : BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL))
M&L for preparation of old decoreated external wall surface by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, applying 2mm thick wall care putty, again sand papering thus making surface smooth and applying two coats of cement base paint over coat of primer on walls complete all as specified and as directed by Engr- in-charge. Note :- The prepration of surfaces stage shall be got approved from GE before applying the finishes.
M&L for prepration of old plstered surfaces of wall and applying two coat of white wash complete all as specified and as directed by Engr- in-charge.
M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 Cm width or girth and applying one coat of synthetic enamel paint.
M&L for Preparation of old painted surfaces of steel of any description over 10 Cm width or girth and applying one coat of synthetic enamel paint.
Taking down cement plaster on brick walls, or stone walls / ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
M&L 10-12 mm thick polymer modified readymix cement based plaster make ultratech (brand name readiplast) or equivalent in ratio of 1:4 on brick or concrete surface etc .on wall finished even and fair without using extra cement complete all as specified and as directed by Engr- in-charge.
Taking down cement plaster /duster bed PCC of Column, chajja, Parpapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4 type B1 (average thickness of PCC 25mm) as required, brushing with neat cement slurry @ 3.0 Kg of cement per Sqm including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surface complete all as specified and as directed by Engr- in-charge.
M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed by Engr- in-charge.
M&L for prepration of newly plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over one coat of primer from the same manufacturer complete all as specified and as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. (Make : BERGER (WEATHER COAT ALL GUARD), ASIAN (APEX ULTIMA), NEROLAC (EXCEL TOTAL))
S&F in repair precast cement concrete Type B - 0, 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) complete all as specified and as directed by Engr- in-charge.
S&F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and as directed by Engr- in-charge.
M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of block shall be of 2 Qtrs on each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint complete all as specified and as directed by Engr- in-charge.
M&L for prepration of newly plastered surfaces of wall and applying 1mm thick birla white wall care putty complete all as specified and as directed by Engr- in-charge.
M&L Providing and applying high quality acrylic modified resin based texture of finetex Honeycomb sand stone- 3211with anti alage and UV resistance property to be applied as in intermeadite finishes in desired pattern @ 43.04 kg/10 sqm to form film of 1 - 1.50 mm thickness after scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces and applying coating with premium acrylic smooth exteriorpaints with Silicone additives of required shade by two or more coat @ 1.43 Ltrs/ 10 sqm over and including one coat of premium quatity primer complete all as specified and as directed by Engr- in-charge.
Providing and applying high quality acrylic modified resin based texture of Pebbletex bubble silver escapade M - 604 Pattern or other any shade / pattern with anti alage and UV resistance property to be applied as in intermeadite finishes in desired pattern @ 43.04 kg/10 sqm to form film of 1 - 1.50 mm thickness after scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces and applying coating with premium acrylic smooth exteriorpaints with Silicone additives of required shade by two or more coat @ 1.43 Ltrs/ 10 sqm over and including one coat of premium quatity primer complete all as specified and as directed by Engr- in-charge.
M&L for prepration of surface Texture / tiling on wall and ceiling for filling cracks with Smart care Textutred crack filler with following steps. 1) Open the Crack and widen it to form of V' shaped groove with help of Chisel. 2) Clean the area throughly so that it is free from dust and loose particles. 3) Apply a shelf priming coat (1:1) dilution with water ) of smart care textured crack filler over crack edges and allow to dry it for 1- 2 hrs. 4) Apply first coat of undiluted smart care Textured crack filler on the crack using spatula or putty Knife. 5) Press the paste firmly in the crack to ensure full contact with the surface .6) Spread Smart care Textured cracks Filler up to atleast 3 cm on either side of the crack for better adhesion. 7) Apply in consecutive perpendicular layers to avoid leaving air pockets . 8) allow to dry for a minium 6 hrs. 9) apply the second undiluted coat in the in the same manner as required complete all as specified and as directed by Engr- in-charge.
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and as directed by Engr- in-charge. (Paymentfor providing grooves shall be made separately). ®
M &L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed by Engr- in-charge.
DEV CONSTRUCTION
M/S Blues Developers Pvt. ltd
S GOURAV PRAKASH ENTERPRISES
M/s Shubh Enterprises
Vipul Construction
M/S VERMA BUILDER
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .