REPAIR MAINT OF DOOR WINDOWS VENTILTOR ROOF SHEETING CERTAIN FLOORING AND ALLIED WORKS IN ORDAQA A KIRKEE AND TECH AND RESI ARE AT R AND DE E DIGHI PUNE 15

Amount

Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level) including removel of debries to out side MD land complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), 75 mm thick as in sub base for floors, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises complete all as specified and as directed.

M&L for 15mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for Rendering 10mm thick (as backing coat) on fair faces of brick work or concrete sufaces in CM 1:3 complete all as specified and as directed.

M&L for Vitrified ceramic tiles 9 to 10 mm thick, light shade as in flooring and skirting (square/ rectangular) polished area of each tiles size exc 0.11 sqm but not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No 8.00 here in before but size ot tile exc 0.11 sqm but n exc 0.36 sqm complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles 7 to 8 mm thick in vertical surfaces such as skirting/dado etc (With two borders and mothiff pattern) set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over a backing coat of 10 mm thick plaster in CM 1:4 including dubbing out coat to an average thickness of 10 mm thick in CM (1:6) complete all as specified and directed.

M&L for Granite(of any type and shade) 18 to 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone for gas connection pipe complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and as directed.

All as per item No. 14.00 above but n.exc 1.5 sqm each complete all as specified and as directed.

S&F second class hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides with 6 mm thick teak wood edging all round complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and as directed.

Supply and fix in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F MS butt hinges, of size 100 mm complete all as specified and as directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S& F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, 150mm long fabricated type, anodised complete all as specified and as directed.

S&F in repair Viterious china White Wash Hand Basin includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting & 15 mm PVC connection pipe 450 mm long complete all as specified and as directed.

S&F in repairs 10 liters capacity PVC low level flushing cistern complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook complete all as specified and as directed.

S&F in repair PVC floor trap/nahani trap incl stainless steel gratings, 75 mm dia of outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and as directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and as directed..

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F for 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F 32 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm as waste pipe complete all as specified and as directed.

S/F in repair sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm complete all as specified and as directed.

Taking down of door shutters of any description exc 1 Sqm and n.exc 2 sqm and refixing in same opening after readjusting, easing complete all as specified and as directed.

Supply and fix in repairs 20mm dia bore Decorative stainless steel Curtain rod & incl SS Brackets of decorative type (Pattern of Fixing bracket and stops complete all as specified and as directed.

Supply and fix in repair 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe etc complete all as specified and as directed.

Supply and fix in repairs Bib taps, fancy type and chromoum plated, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed complete all as specified and as directed.

Supply and fix in repairs Stop valves 15mm dia, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Carry out repairs to steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and making it functional complete all as specified and directed.

Carry out repairs to steel ventilator with top hung shutter including hinges, steel peg stay and making it functional complete all as specified and directed.

Demolition of cement concrete in Roofs, floors (other than ground floors) of any thickness etc including removing existing water proofing treatment (any number of layers) etc complete all as specified and as directed.

M&L for providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in leavel course of roof/ chajja kerbs average 40mm thickness complete all as specified and as directed.

Supplying and applying waterproofing treatment to sound, moisture free concrete surface. System includes proper surface preparation to remove loose dust, dirt, loose mortar, curing compound etc., carry out cementitious injection grouting at leakage points and construction joints using cement slurry modified with Cebex 100-Plasticised expandive grout admixture supplied in 225 gm pouch, treatment of construction joints using polymer modified mortar prepared by using Nitobond SBR Latex, application of polymer modified vatta at floor-wall junction, filling of annular space around rain water outlet using Conbextra GP2 - Non-shrink cementitious grout. any undulated surface and pot holes shall be filled with Epoxy mortar to obtain sound/levelled surface. Application of primer Nitoproof WB Primer on sound mother slab surface. Followed by application of two coats of Nitoproof 600PF - Liquid applied single component pitch free polyurethane coating supplied in 25 kg drum coverage @ 2.3 kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufacturer’s specifications and as directed. Coating shall be having crack bridging of 2 mm, Elongation (ASTMD 412) > 600 %, Tensile Strength (ASTM D412) – 2.5 N/mm2, Recovery from Elongation (ASTM D412) – 95 %, 85% Solid Content, Tear Resistance (ASTM D624) – 15 Kn/m, Shore A Hardness (ASTM D2240) – 60, Water vapour transmission not more than 1g/m2/hr, Water Permeability (DIN 1048) – Nil, Service Temperature – -40°C to 70°C, Flash Point > 70 °C HSE Guidelines: It is recommended to provide adequate general and local exhaust ventilation, provide protection to eye, face, hand and other skin by wearing appropriate gloves, goggles, face shields, respiratory protection etc. as directed in SDS of the product.

Supply only integral Waterproofing compound complete all as specified and as directed.

Supplying and laying seperation & protection layer- Geotextile membrane 150 gsm prior to protection screed complete all as specified and as directed.

Taking up or down steel tubing & connections incl cleaning for relaying of pipe 15 mm bore or removing complete all as specified and as directed.

Taking up or down steel tubing & connections incl cleaning for relaying of pipe 20 mm bore pipes complete all as specified and directed.

S/F for steel water tubing medium grade GI with all fittings & fixed complete to walls & ceilings or laid on floors of bore of pipe 15 mm complete all as specified and as directed.

S/F for steel water tubing medium grade GI with all fittings & fixed complete to walls & ceilings or laid on floors of bore of pipe 20 mm complete all as specified and as directed.

Refixing of old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 15 mm complete all as specified and as directed.

Refixing of old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 20 mm complete all as specified and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 15 mm bore pipe complete all as specified and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore pipe complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position (cleaning repairing, etc. measured separately) capacity of tank exc 500 and n exc 1000 ltr) complete all as specified and as directed.

Demolition of Brickwork or PCC block masonary, stone/bou-lder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry type C-1 1:3:6 (20mm graded aggregate) built in cement morter 1:6 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

Removal of demolished unserviceable material, debris and rubbish to out side the MD land upto 5Km distance complete all as specified and directed.

S/F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia including taking down old pipes complete all as specified and as directed.

S/F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia including taking down old pipes complete all as specified and as directed.

S/F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified and as directed.

S/F in repair PVC (SWR) bends any radius 75 mm dia complete all as specified and as directed.

Preparation of old white washing surfaces of wall and applying one coats white wash on walls complete all as specified and as directed.

All as per item No 65.00 above but on ceiling surfaces complete all as specified and as directed.

Complete removal of existing treatment including Washing, rubbing down and stopping etc. and applying two coats white wash on walls complete all as specified and directed.

Preparation of old distempered surfaces of wall and applying one coat of oil bound distemper etc all as specificed and directed.

Preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper etc complete all as specified and as directed.

Preparation of old distempered surfaces of wall and applying two coat of oil bound distemper complete all as specified and as directed.

Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) etc complete all as specified and as directed.

M&L for redering 15 mm thick in CM (1:6) on stone masonary/brick sufaces, surface finished even and Smooth without using extra cement incl sagol finish complete all as specified and as directed.

M&L for redering 15 mm thick in CM (1:4) on stone masonary/brick sufaces, surface finished even and Smooth without using extra cement incl sagol finish complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer, white or tinted over wall care putty complete all as specified and as directed.

Preparation of new plaster surface of walls and applying two coats of cement base paint etc complete all as specified and as directed.

Preparation of old decoreted surfaces of walls and applying one coat of cement bore paint etc, complete all as specified and directed.

M&L for Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including corrugated ridge sheeting, fixed in repairs complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel in purlins /rafters of channels, angles or tee sections, fixed with MS angle cleats,plates etc incl all necessary welding , bolting etc. independently without connecting plates, etc.,conf to Fe 290 (Gde E-165) complete all as specified and directed.

Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, partitions and ventilators with one or more rebates including necessary jointing cleat for fixing etc complete all as specified and as directed.

S&F anodised aluminium window, doors and ventilator shutter, sliding/ fixed type without sash bar , aluminium section weighing 0.55 Kg/Mtr including necessary jointing cleat glazing clips rubber packing anodised aluminium snap beading screws, rollers, locks etc complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for sheet glass ordinary quality 4 mm thick fix in Aluminium/ steel, window/vent shutter area exc 0.50 Sqm in each pane complete all as specified and as directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for preparation old decorated surface and applying two coats of acrylic exterior emulsion paint including filling the cracks with fosroc Notobond crack filler to arrest the seepage of water from wall surface complete all as specified and directed.

vishalconstruction