Renewal of Existing BT Road at Andal 1st Street (115073R6312), Andal 2nd Street (115073R6311), Andal 3rd Street (115073R6310), Sundarar Street (115073R6315), Thirunavukarasar Street (115073R6313) Kumaran in ward no73

Amount

Advance Patch work 13.20mm Providing Advancve Patch work using 50mm consolidated Thickness by using 1m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the pre measurement, heating the bitumen in bitumen boiler, heating the aggregate sand mixing them with bitumen in mini hot mix plant for premixcarpet only rolling by 60-70KN power roller for premixcarpet and seal coat seperately including labour charges for spreading the mix for premixcarpet application of bitumen for seal coat over premixcarpet, including labour charges for spreading seal coat seperately over premixcarpet etc. including higher charges and fuel charges for, bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V Specifications

Providing and laying tack coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing laying Bituminous Concrete to 30mm/40mm thick using 0.13cum of 19.00-9.50mm 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG 30/VG40bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, 10sqm including cost adn coveyance of all materials to CMP site heating the bitumen and aggregate to required temperature and mixing them in required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity conveying the mix by tipper trucks to paver site spreading the mix to uniform thickness 40mm with mechanic paver to the specified grades and cross section and consolidated by 8-10 ton vibratory / Pneumatic roller to the required density etc inclluding labour attaending to Paver to site etc. including hire charges for 20-30 CMP with bitument bitumen Boiler tipper truck, Paver finisher / 9m Paver finsiher vibratory / Pneumatic rooler and all other tools and plant required including fuel all other incidential charges etc complete as per Specification using CMP as Per clause 507 of MORTH Rev5

Manufacturing, supply & fixing of Retro-Reflective Road name sign board single arrow size 1.0x0.5m size made out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010& Type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65NB pipe vertical post firmly fixed to the ground by means of property designed foundation with M15 grade cement concrete 30cmx30cmx45c mets complete. The information message shall be made out of cut out letters in Blue color transparent overlay film as per IRC 67-201 Guidelines, 7 years pre qualification warranty for Retro Reflective sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro-Reflective type XI. The Retro - Reflective sheeting should have manufacturers WATERMARK on the sheeting surface for identification and the reflective sheeting should be orientation free. This should be compulsorily be demonstrable.

MPS AND CO

mpk enterprises