Work of Bisalpur- Prithviraj Nagar Water Supply Project Phase-I, Stage-I

Amount

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

700 mm / 6 mm th.

1000 mm/ 7 mm th.

1100 mm/ 8 mm th.( Inter connecting Line)

1300 mm/ 8 mm th.

1500mm/ 9 mm th.

1600 mm/ 9 mm th.

2300 mm/ 13 mm (Balawala CWR connecting Line)

Supply and Pushing of MS casing pipe of specified thickness by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (upto 3 metre depth) with proper protection at three sites with shoring sheets and ISMB's. Providing MS cutting edges for front shield and Constructing thrust bed at designated level. Necessary de-watering and providing concrete foundation at the base of the driven pit, PVC/Rubber suddle as per the requirement of Railway Authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per requirement and as per approved by railway authorities, specification and the direction of the Engineer. (Protective coating/ lining if done that will be paid extra)

1200 mm dia16 mm th casing pipe, carrier pipe 700 mm ( Sikar Rly Line 50 Mtr)

1600 mm dia 20 mm th casing pipe, carrier pipe 1200 mm ( Ajmer Rly Line 50 Mtr.)

2200 mm dia 20 mm th casing pipe, carrier pipe 1600 mm (Ring Road,=120+ Gas pipe line 30 m+ State High way Diggi Road-30 =180 m)

2200 mm dia 20 mm th caisng pipe carrier Pipe 1600 mm for Balawala Pumping station for crosing Exesting Pipe line and Bunch of Eletric and comunication cables.

1200 mm dia RCC NP4 casing pipe, carrier pipe 700 mm ( MD Roads, 120)

1800 mm dia RCC NP4casing pipe, carrier pipe 1200 mm ( Kalwar Road State High way 30)

1800 mm dia 20 mm th casing pipe, carrier pipe 1300 mm ( Ajmer Road,=100)

1600 mm dia RCC NP4 casing pipe for 1100 mm carrier pipe ( new Sanganer Road, Sirsi road and Other MD Roads)

Permanent and temporary Cathodic Protection for MS Pipe line @1.75% of MS Pipe line cost

Air Vessel and one way surge tank/ Stand Pipe

200 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. For Scour Valve/ Isolation Valve for Air Valves (For TM & RM)

100 mm dia

150 mm dia

200 mm dia

300 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Manually Operated D/F DI Sluice valves of approved PN 1.0 make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. For Isolation Valve (For Distribution)

80 mm dia

100 mm dia

150 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. (Electrically Operated & SCADA Compatible class PN 1.0 ) (Sub Zone Valve Near ESR)

150 mm dia

250 mm dia

300 mm dia

350 mm dia

Providing, lowering, laying, aligning, fixing in position jointing in pipeline following dia D/F DI plunger type Flow Control Valve PN 1.6 class with electrical actuator suitable for SCADA compatibility complete (including jointing & jointing material) including all material, labour, testing and commissioning as per Technical Specification & as per direction of Engineer. ( Size in MM)

350 mm dia

400 mm dia

500 mm dia

Providing, Installation, Testing and Commissioning of ELECTROMAGNETIC FLOW METER for Water Application: Liner: Polyurethane or Hard Rubber / Electrode MOC: SS316L or CS /Housing : Die Cast Aluminium or CS / Power Supply: 90-230 V AC / Output: 4-20mA with HART / Sensor Cable : 10 mt / Flow Tube or Sensor housing protection IP68 / Process Flange : SS316 / Display : 3 1/2 LCD Display / Cable Connection : 1/2"NPT /Accuracy : 0.5%

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

450 mm dia

500 mm dia

600 mm dia

700 mm dia

1000 mm dia

1200 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Butterfly valves of approved make & design standard of following dia. complete (including jointing & jointing material) including all material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer. (PN 1.0 class)

200 mm dia

250 mm dia

350 mm dia

400 mm dia

450 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Butterfly valves of approved make & design standard of following dia. complete (including jointing & jointing material) including all material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible (PN 1.0 class) ( Main Header at PS & Inlet of CWR)

200 mm dia

250 mm dia

350 mm dia

400 mm dia

500 mm dia

600 mm dia

700 mm dia

800 mm dia

2300 mm dia

Providing, lowering, laying, aligning, fixing in position and jointing in pipe line, DI Dual Plate Check Valves of PN 1.0 rating of following dia (including jointing and jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.

250 mm dia

300 mm dia

350 mm dia

400 mm dia

700 mm dia

Providing, lowering, laying, aligning, fixing in position and jointing in pipe line DI Kinetic Double Air Valves of following dia (including jointing and jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.

100 mm dia

150 mm dia

200 mm dia

Providing, lowering, laying, aligning, fixing in position and jointing CI/DI Dismantling Joint as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

700 mm dia

800 mm dia

1000 mm dia

1200 mm dia

1600 mm dia

2300 mm dia

Construction of RCC valve chamber for Sluice valve / Butterfly valve / Flow Meter / Pressure Reducing Valve / Flow Control Valves different Size of Pipes including earthwork excavation, 100mm PCC M10 (1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as leveling course, RCC M20 grade (1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) for base slab, side wall & "AA" class Loading Ferro-Cement drain covers, including cost of steel reinforcement not less than 80kg per cum CC, form work, proper curing of concrete work complete in all respect as per standard specifications and drawings and as directed by Engineer.

(Type -A = 1.10 X 1.20 X 1.70 M ) for pipe size 100 mm to 350 mm

(Type -B ,1.20 X 1.50 X 1.50 M Size) for pipe size 400 to 500 mm

(Type -C , 1.900 X 1.900 X 2.200 M Size) for pipe size600 mm to 900 mm

(Type -D , 2.300 X 2.400 X 3.800 MSize) for pipe size 1000 mm to 1500 mm

Construction of RCC valve chamber for Valves different Size of Pipes including earthwork excavation, 100mm PCC M10 (1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as leveling course, RCC M20 grade (1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) for base slab, side wall & "AA" class Loading Ferro-Cement drain covers, including cost of steel reinforcement not less than 80kg per cum CC, form work, proper curing of concrete work complete in all respect as per standard specifications and drawings and as directed by Engineer. For Sluice Valves (For Railway Line Crossing )

Ajmer Line 1200 mm Pipe Size ( Size of chamber 2.3x 2.4x 4.40 m)

Sikar Line 700 mm Pipe Size ( 1.9x1.9x4.0 m)

Construction of RCC valve chamber for AIR Valve on different Size of Pipes including earthwork excavation, 100mm PCC M10 (1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as leveling course, RCC M20 grade (1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) for base slab, side wall & "AA" class Loading Ferro-Cement drain covers, including cost of steel reinforcement not less than 80kg per cum CC, form work, Air vent pipe (GI/MS) of proper size (50 mm to 125 mm), proper curing of concrete work complete in all respect as per standard specifications and drawings and as directed by Engineer. For AIR VALVES

Pipe Size up to 350 mm

Pipe Size 400mm to 500 mm

Pipe Size 600 mm to 900 mm

Pipe Size 1000 mm to 1500 mm

Pipe Size 1600 mm to 2000 mm

Construction of Pump House Design and Construction of pump house building with structures required for suction manifold including providing pump floor area; switch-gear or panel area; control room; maintenance bay/ loading – unloading bay; Duty room, EOT of required capacity and span and other allied civil works complete office area, lavatories, DG power generation shed, foundations for pumps, support structures for delivery pipes/valves, cable trenches, thurst blocks, pedestals, valve chambers, cable trenches, parking area, water supply, sanitary, lighting systems, septic tanks, and all finishing work to complete the building as per the given scope of work and specifications.

Balawala (including Vacuum Chlorinator room as per scope of work )

IPS -1 West way Height

IPS02 (Gokul Nagar)

Swarn Vihar

Vardhman Sarovar C

Shiv Vihar (under ground)

Keshopura

Kanakvirndvan

Loha Mandi

Supply, Installation, Commissioning & testing of Contnous type Electrochlorinator including all required pipe fitting, accessories, valves etc, Brine Tank (HDPE material) of required capacity , level & Temprature sensors, pumps, Rotameter, Electrolyzer of required capacity, Hypo tank (HDPE Material), Blower, acid tank & pump, DC rectifier cum Control Panel and all required power & control cables complete.

1.5 kg/hr capacity ( At vardhman Srovar)

2.5 Kg./Hr. capacity ( At Swarn Vihar , shiv Vihar, Keshupura & Gokul Nagar)

3.0 Kg./Hr. capacity ( At Kankvirndavan)

Providing,installation, testing and commisioning of vacuum Feed Gas Chlorinator with all assessories and making connection with existing pipeline required including supply & instalation of trunnion roller support, auxillary container valve, fluxible copper connector, manifold valve, tonner manifold pipes, chlorine Pressure gauge, Isolation valve, gas filter, pressure reducing valve, chlorine gas pipe with fittings, diffuser, lifting beam, load indicator, 25 NB PP diaphragm Valve on injector inlet & outlet, 32 OD uPVC pipe for chlorine solution, 25 NB GI pipe for pump suction & delivery, 25 NB GM gate valve on pump suction & delivery, 25 NB GM 'Y' type stainer on pump suction, 25 NB GM Check valve on pump delivery, pressure gauge with Isolated valve on pump delivery and chlorine booster pump with motor of required capacity complete in all respect as per specification and the direction of the Engineer.

5 kg/hr capacity each

Supply of Chlorine Tonner as per specifications with rollers complete in all respect as per the direction of Engineer

Supply of Chlorine Safety Equipment set comprising of the items Chlorine leak detector with two sensors, self contained compressed air breathing apparatus, safety shower with eye wash, emergency tonner repair kit, protective clothing such as PVC overall, gloves and rubber boots; complete as per detailed specifications & the directed of the Engineer.

Construction of Chlorination Room as per drawing & specification of PWD BSR 2018 as direction of engineer-In -charge over the CWR

Construction of RCC INTZE type Over Head Service Reservoir of following capacity and staging consisting of excavation in all types of strata, RCC work, cement plaster with water proofing compound to the inner face of the container including refilling disposing off the surplus stuff, plinth protection, all labour and material charges including providing and fixing of accessories such as ladder, manhole frame and covers, water level indicator (float type), ventilator with SS screen, lightening arrestor, float valve, puddle collar, Inlet, Outlet, Overflow, Washout pipes & valves, G.I. pipe railing around walk way and top dome, providing RCC staircase from 4.5 mtr height of ground level to top level, chambers for all valves, providing and applying three coats of cement paint to the external surfaces of container, food grade epoxy paint to internal surface and giving satisfactory hydraulic test and water tightness test as per IS, code, etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job includes painting the name of the scheme and other details on the reservoir, providing alluminium portable ladder suitable to reach at height of 4.5 Mtr and any other work related to structure as per the directions of Engineer-in-Charge, Technical Specification and Scope of Work .Work also includes Construction of room at ESR (from GL to 1st bracing and column to column walls) for housing, valves, flow meters, pressure transmitters, etc. RCC OHSR, Staging 22 mtr. ( capacity in KL)

1500 KL (11A, 12A, 4A, 6A, 6B1,7C & 7D)

Construction of RCC INTZE type Over Head Service Reservoir of following capacity and staging consisting of excavation in all types of strata, RCC work, cement plaster with water proofing compound to the inner face of the container including refilling disposing off the surplus stuff, plinth protection, all labour and material charges including providing and fixing of accessories such as ladder, manhole frame and covers, water level indicator (float type), ventilator with SS screen, lightening arrestor, float valve, puddle collar, Inlet, Outlet, Overflow, Washout pipes & valves, G.I. pipe railing around walk way and top dome, providing RCC staircase from 4.5 mtr height of ground level to top level, chambers for all valves, providing and applying three coats of cement paint to the external surfaces of container, food grade epoxy paint to internal surface and giving satisfactory hydraulic test and water tightness test as per IS, code, etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job includes painting the name of the scheme and other details on the reservoir, providing alluminium portable ladder suitable to reach at height of 4.5 Mtr and any other work related to structure as per the directions of Engineer-in-Charge, Technical Specification and Scope of Work Work also includes Construction of room at ESR (from GL to 1st bracing and column to column walls) for housing, valves, flow meters, pressure transmitters, etc. Rates for RCC OHSR, Staging 24 mtr. ( capacity in KL)

Construction of Rectangular RCC Clear water Reservoir as per contractor’s own design and drawing as per Relavent ISS / Specifications . The work includes investigation of SBC, preparation and submission detailed design and drawing (duly approved by MNIT/Govt. Engg College for required capacity, raft ,foundations, construction of plinth protection food grade epoxy paint on inner surface of tank, anti-carbonation paint on outer surface and testing of tank for water tightness as per GA drawing complete in all respect. including Supply and fixing of CI D/F pipes, inlet, outlet, washout, overflow pipe, sluice valves for washout, float valves, puddle collars, duck foot bends, water level indicator, Pressure Transmitter IP67, finishing, testing& commissioning complete in all respect.

Balawala

IPS01 (West Way Heights)

IPS02 (Gokul Nagar)

Construction of Rectangular RCC Clear water Reservoir as per contractor’s own design and drawing as per Relavent ISS / Specifications . The work includes investigation of SBC, preparation and submission detailed design and drawing (duly approved by MNIT/Govt. Engg College for required capacity, raft ,foundations, construction of plinth protection food grade epoxy paint on inner surface of tank, anti-carbonation paint on outer surface and testing of tank for water tightness as per GA drawing complete in all respect. including Supply and fixing of CI D/F pipes, inlet, outlet, washout, overflow pipe, sluice valves, float valves, puddle collars, duck foot bends, pipe inter connecting the incoming& outgoing with all specials with all specials, float valve, water level indicator, Pressure Transmitter IP67, finishing, testing& commissioning complete in all respect.

Lohamandi

Gokul nagar

Kanak Vrindavan

Keshopura

Swarn Vihar

Vardhman Sarovar C

Shiv Vihar ( Complete under Ground)

Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand (For filling existing Open wells ESR campus)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) (For Open wells filling under ESR Foundation)

Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casting pumps with HT motor, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification

Balawala PS : - For Tarnsfer water to PRN North & South (Q=444.11LPS & H= 63m )

IPS 1 West Way Hight : - For Tarnsfer water to PRN North (Q=565.37LPS & H= 42m )

Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casting pumps with LT motor, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification

IPS 2 Gokul Nagar : - For Tarnsfer water to Loha Mandi (Q=166.60LPS & H= 48m )

SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity : Air Cooled & Naturally Aspirated-

25 KVA at 0.8 pf 415V 50Hz 3-Ø at IPSs

25 KVA at 0.8 pf 415V 50Hz 3-Ø at ZPSs

Campus Development Works Providing Barbed wire fancing on existing Boundry wall includind dismentling existing Brick masonary 30X30X23 cm for fixing of L- iron for wire fancing repair of plaster, Y shap barbed wire fancing with 10 line of barbed wire over wall, fabrication and fixing of gates, cow cature, water proofing cement paint etc.

West way Height 1.Shiv Vihar, 2. VardhmanSarover C, 3.Swarn Vihar, 4. Keshopura, 5. Gokul Nagar, 6. Kankvirndavan, 7. Gokul Nagar, 8. Loha Mandi ( including Gates and cow cature as required for all head works) PRN South (ESR Campus) :- Ashok Vatika, Radhamukat Vihar,Sunder Nagar Ist,Sumer Nagar,Narayan Vihar B, Vijai Nagar, Nidhi Vihar, Tiwari Nagar, Shiv Vihar F-2 PRN North (ESR Campus):- Griraj Nagar S-6, Rajni Vihar S-7, Dhabas S-7, Rangoli Gardan, Rangoli Gardan, Janak Vihar, Bajri Mandi, Ayodha Nagar, Ashis Goyal farms, Gokul Nagar, JDA Colony Girdharipura

Construction of consumer care center as per design & specification

construction of J2- Type Quarter full set for staff Residence as per design & drawing at each Pump house-4Nos (100 sqm each)

construction of Duty room as per design & specification

construction of Chokidar Hut as per design & specification

Designing and Construction of cement concrete road inside all campus with carriageway of 3.75m including earthwork, laying concrete etc as per specifications given in tender document and drawing at Balawala, West way Height, Gokul Nagar, Swaran Vihar, Vardhman Srovar, Shiv Vihar, Keshupura, Kanakvirndawan, Gokul Nagar, Loha Mandi PH

Horticulture work as per scope/ specificaion &direction of EIC at following locations at Balawala, West way Height, Gokul Nagar, Swaran Vihar, Vardhman Srovar, Shiv Vihar, Keshupura, Kanakvirndawan, Gokul Nagar, Loha Mandi PH

Surface Drainage as per scope/ specificaion &direction of EIC at following locations at Balawala, West way Height, Gokul Nagar, Swaran Vihar, Vardhman Srovar, Shiv Vihar, Keshupura, Kanakvirndawan, Gokul Nagar, Loha Mandi PH

Construction of Office building for Executive Engineer/ Assistant Engineers as per detail given in scope of work & direction of EIC (Min. area 270 SQMT )

Construction of Residantial building for Executive Engineer/ Assistant Engineers ( PRN North) as per detail given in scope of work (Min area 200 SQMT)

Construction of RWH as per detail given in scope of work

Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal Centrifugal Split Casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification

ZPS- S 2 ,3,4(Gokulnagar)

PUMP-2 for Zone For OHSR (Q=102.74LPS & H= 31m )

PUMP-4 for Zone For OHSR (Q=74.72LPS & H= 30m )

ZPS-S 6 (Kanakvrindavan)

PUMP-4 For Zone OHSR (Q=167.01LPS &H=59m)

ZPS- S 7 (Keshopura)

PUMP-3 For Zone OHSR (Q= 215.26 LPS & H= 56m )

ZPS-1 (SwaarnVihar)

PUMP-1 for Zone For OHSR (Q=162.25LPS & H= 52m )

ZPS-2 (Vardhman Sarovar C)

PUMP-1 For Zone OHSR (Q= 55.40LPS & H= 39m )

PUMP-3 For Zone OHSR (Q=114.79LPS &H=46m)

ZPS-3 (Shiv Colany)

PUMP-1 For Zone OHSR (Q= 161.72LPS & H= 48 m )

PUMP-3 For Zone OHSR (Q= 97.22 LPS & H= 50 m )

PUMP-4 For Zone OHSR (Q= 102.77 LPS & H= 50m )

Supplying, Installation, Testing & Commissioning submersible type dewatering pump of stainless steel / Noryl casing & impellor of discharge and head given below complete with base plate and all accessories suitable for operation on 230 V, single phase/415 V /3 phase, 50 Hz. AC supply complete with starter for automatic operation including water level sensing device / float switch inter connection with submersible cable etc. as required. 180 LPM with 10 mtr head

Supply & fixing of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect ISI make. 50 mm

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. Manually operated class PN 1.6 For Suction side

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible (PN 1.6 class)

250 mm dia

350 mm dia

400 mm dia

800 mm dia

Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Butterfly valves of approved make & design standard of following dia. complete (including jointing & jointing material) including all material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer. Electrically Operated & SCADA Compatible (PN 1.6 class)

250 mm dia

350 mm dia

400 mm dia

600 mm dia

700 mm dia

Providing, lowering, laying, aligning, fixing in position and jointing in pipe line, DI dual plate check valves of PN 1.6 rating of following dia (including jointing and jointing material), including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer.

250 mm dia

300 mm dia

350 mm dia

400 mm dia

600 mm dia

700 mm dia

Providing,installation,testing and commmissioning of following stain less steel AISI 304 Expansion bellows of 16 bar rating with tie rods as per technical specifications and layout drawings including jointing material like nuts,bolts,rubber gaskets etc. complete in all respect as per technical specifications and as per direction of Engineer

250 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

600 mm dia

700 mm dia

800 mm dia

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.

MS pipe specials

Supply, Installation, Testing and Commissioning including but not limited to, safe storage, protection, civil, works, erection, testing and commissioning of required to complete the works in all respects for the following electrical equipment- 33 KV Ring Main unit consisting of 2 LBS at Incoming & 2/4 Outgoing as per Scope and Specifications at the following locations.

Balawala

IPS2/ ZPS-S6

Stranded Compact Circular Aluminium Conductor,Conductor Screened with Extruded Semi Conducting compound,XLPE insulated,Insulation Screened with copper tape,Cores laid up,inner sheath of PE type,galvanised steel flat strip armoured and overall PVC Sheathed cable confirming to IS 7098/II/85 with latest amendments of 33 KV(UE) of the following size for all pump house

33 KV(UE) 3CX400mm2

33 KV(UE) 3CX240mm2

33 KV(UE) 3CX185mm2

Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends,testing etc. of 33 KV 3CX 400 mm2 at the following locations

Outdoor Type

Balawala

Indoor Type

Balawala

Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends,testing etc. of 33 KV 3CX 240 mm2 at the following locations

Outdoor Type

IPS 2/ ZPS S6

Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 33 KV cable, with required components, prepration of cable ends,testing etc. of 33 KV.3CX185 mm2 at the following locations

33 KV Indoor switchboard Consisting 2-Incomers ,2-Outgoing and 1-Bus Coupler alongwith all accessaries and specifications at the following locations

Balawala

33 /3.3 KV, 7 MVA,ONAN,Transformer with OLTC (+/- 10%,Taps at 1.25%) and RTCC panel alongwith all accessaries and specifications at Balawala

33 /3.3 KV, 4 MVA,ONAN,Transformer with OLTC (+/- 10%,Taps at 1.25%) and RTCC panel alongwith all accessaries and specifications at IPS 1

3.3 KV Indoor switchboard Consisting 2-Incomers ,2-Outgoing and 1-Bus Coupler alongwith required no of Outgoing motor,transformer feeders as per specifications and complete in all respect at the following locations

Balawala

Stranded Compact Circular Aluminium Conductor,Conductor Screened with Extruded Semi Conducting compound,XLPE insulated,Insulation Screened with copper tape,Cores laid up,inner sheath of PE type,galvanised steel flat strip armoured and overall PVC Sheathed cable confirming to IS 7098/II/85 with latest amendments of 3.3 KV(E/UE) 1CX400 mm2 at the following locations

Balawala

Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 3.3 KV cable, with required components, prepration of cable ends,testing etc. of 1/CX 400 mm2 /outdoor

Outdoor Type

Balawala

Indoor Type

Balawala

Stranded Compact Circular Aluminium Conductor,Conductor Screened with Extruded Semi Conducting compound,XLPE insulated,Insulation Screened with copper tape,Cores laid up,inner sheath of PE type,galvanised steel flat strip armoured and overall PVC Sheathed cable confirming to IS 7098/II/85 with latest amendments of 3.3 KV(E/UE) 3CX150 mm2 at the following locations

Balawala

Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 3.3 KV cable, with required components, prepration of cable ends,testing etc. of 3/CX 150 mm2 .at the following lovations

Balawala

Reactance Type soft starters starters for 3.3 KV motors as per requirements & specifications at the following locations

Balawala

3.3 KV Capacitor with SDF unit for 3.3 KV grade motors as per requirements & specifications at the following locations

Balawala

250 KVA,3.3 /0.433 KV ONAN,Transformer with OCTC (+/-10%,taps at 2.5%) alongwith all accessories and specifications at the following locations

Balawala

33/0.433 KV ONAN,Transformers with OCTC (+/-10%,taps at 2.5%),alongwith all accessaries and specifications as per the following ratings

Bus Duct arrangement in convenient sections complete with enclosure of CRCA sheet steel of minimum 2 mm thickness, aluminium bus bar and earth bus for use on 3 phase, 4 wire, 415 volts, A.C. supply with degree of protection IP-42 for the following current carrying capacity, including jointing of sections, copper flexible joints. Expansion joints, bends, and earthling with 2 runs of alum. Strips etc. and complete in all respect as per requirements and specifications for the following rating of Transformers

Floor mounted LV Switchboards including capacitors & APFC (Indoor, Dust proff IP-4x front operated with 2 mm thick sheet metal compartmentalised) with all accessible parts, head shrinkable sleeves, SMC/DMC bus bar supports, etc. as per requirements and specifications complete in all respect

Balawala

IPS 2/ ZPS S6

Providing & laying XLPE insulated /P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS 7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cm*75 cm size trench,25 mm thick under layer of sand, second class brick covering, refilling earth,co`mpection of earth, making necessary conection, testing etc.as per specifications and of the following sizes at diffrent locations

Supply & making one end termination with heavy duty single compression brass gland SIBG type, copper lugs duly crimped with crimping tool, PVC tape etc for following size of arrmoud pvc insulated and pvc sheated/ XLPE almunium cunductor cable of 1100 volt grade of the following sizes at diffrent locations

Providing & Laying XLPE/PVC PVC insulated & PVC Sheathed armoured Cable of 1.1 KV grade with copper conductor as per IS 1275 including escavation of 30cmX 75 cm size trench 25 cm thick under layer of sand and lind class of bricks covering size of the following sizes at dirrent locations

Supply & makingone end termination with heavy duty single compression brass gland SIBG type, copper lugs duly crimped with crimping tool, PVC tape etc for following size of arrmoud pvc insulated and pvc sheated/ XLPE unductor cable of 1100 volt grade of the following size at diffrent locations

Supply, Fabricating & installing 600mm x 62.5mm x 2.0mm sizes of ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders and including painting as required of the following sizes at diffrent locations

600 mmX62.5mmX2.0 mm

300mm x 50 mm x 2.0mm

300 mmX62.5mmX2.0 mm

Miscellaneous for Cable Route Markes,steel,MS Pipe etc for HT & LT Cables for all locations at each pump house

Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements.

Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the existing poles

P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance (LED Light Fixture 72 Watt)

Providing and fixing testing and commissioning of Kiosk type weather proof distribution feeder pillar box of size 600 x 450 x 1000mm with a taper of 75mm at top ( for protection from rain water) and made out of 3.2 mm (10 gauge) thick CRCA MS Sheet, front and back both side openable, duly hinged doors with locking arrangement by providing both sides hold drafts and all hardware for fabrication of box. The cubical panel should be dust and vermin proof followed by two coats of enamel paint and primer. The cubical panel should be mounted with hardware on angle iron frame 40 x 40 x 6m and 600mm long legs duly primered and black painted. Frame be grouted with cement concrete 1:3:6 ratio in 150 x 150 x 750mm and providing brick masonry along angle iron frame above ground level. The panel should comprise of as per following :(a) P/F of 2 Nos. knife switch 400 amp. with U contacts studs and washers etc. (b) P/F of 32 amp Category-I make MCBs, 10 Nos. double pole. & 5 nos TPN . (c) P&F of connecting strips of 63 amp. 4 pole. (d) Bakelite sheet 10mm thick and size 3'x2'. (e) Epoxy insulators 40mm: as per requirement. (f) PVC copper wire 10 sq.mm. Flexible connecting to bus bars to MCB's and MCB to connecting strips in proper manner. (g) Copper bus bar double and D-Type of size 30 x6mm strip approx. 1.5' long, 8 no. with hardware. (h) Provision of cable clamps at side of box and base plate for all locations.

Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating of the size G.I. pipe 3000 mm long , 80/40 mm , terminal 14 mm G.I. strip

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as per the requirement of the following sizes at all locations

50mm x 6mm G.I. Strip

25mm x 6mm G.I. Strip

25mm x 3mm G.I. Strip

10 SWG G.I. Wire

P & F lightning conductor final made out of 25 mm dia.,300 mm long copper tube having single prong at top with 85 mm dia., 3 mm thick copper base plate including holes etc. complete in all respect for all locations

110 volt Ni-Cd batteriies & battery charger with DC Distribution board as per specifications and requirements at the following locations including dual Float cum Boost Charge.

Balawala

S& F of all in one solar LED street light fixture with integrated high efficient Mon crystalline panel with Lithium (LiFePO4) Ferro Phosphate battery with BIS approved make .luminaire should be secondary optic lenses for better distribution with delivered efficacy of > 100 Lumen per watt. Bidder shall have in house R&D Laboratory which is recognised by ministry of Science & Technology department, Govt. Of India/NABL. Compact Solar LED Street Light -60 W (MONO) 18 V/12.8 V42AH/60 W Light for all the locations

Supply,insttalation, Testing, commissioning of Solar PV modul of the Roof Top of all pump house.as per scope of work (total 9) (To cover maximing roof cover area as per specification & direction of EIC)

Providing, Installation, Testing and Commissioning of PRESSURE TRANSMITTER for Water Application: Range for suitable range / Power Supply: 24 V DC / Output: 4-20 mA with HART / Diaphragm: SS316L / Process Connection: 1/2 "NPT (M) / Accuracy: 0.15% Protection: IP67 at the following locations ( at each common delivery header)

Balawala

IPS 2/ ZPS S6

Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum at the following locations (At indidual delievery of pump)

Balawala

IPS 2/ ZPS S6

PLC Based Engineered Automation Panel for 80 DI, 30 DO, 28 AI with Power supply, comunication Modules. Panel Mounted 12 Inch HMI, Network Switch & UPS with Two SCADA Station. Hot redundant (GPRS & Wire) Industrial Grade Module, Antena as per requirements and specifications at the following locations

Balawala

PLC Based Engineered Automation Panel for 48 DI, 18 DO, 28 AI with Power supply, comunication Modules. Panel Mounted 12 Inch HMI, Network Switch & UPS with Two SCADA Station. Hot redundant (GPRS & Wire) Industrial Grade Module, Antena. at the following locations

IPS 2/ ZPS S6

Supply Installation Testing & commissioning of Local Push button Stations as per requirements and specifications

Balawala

IPS 2/ ZPS S6

Providing and laying Stranded/ Flexible Annealed Bare copper conductor ,XLPE/PVC insulated 2 Pair 1.5 sqmm suitably laid up together overall polyester taped Al (Mylar tape wrapped) along with ATC Drain wire overall PVC sheathed (ST-1) overall screened Triad armoured instrumentation Cables generally confirming to PAS 5308- Part-2-2009 as per requirements and specifications for all locations

Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required of for all locations the size of

150mm x 50mm x 1.6mm

600mm x 62.5mm x 2mm

300mm x 62.5mm x 2mm

Master Control Centre located at Balawala comprises with Industrial Rack PC for Engineering , Hard disk in removable frame ,Hot swappable Configuration & data storage and archiving, Processor, RAM , 21 LED screen, mouse, keyboard, wiring, cables and all accessories with Latest Licensed windows server operating system & Licensed Tele sever Engineering Software, Firewall Switch with ADSL Router or Internet, Industrial Grade Layer 2 Managed Type Network Switch etc as per specifications and complete in all respect

Providing, Installation, Testing and Commissioning of CHLORINE ANALYSER for Water Application: Transmitter: Range: 0.05 to 20ppm, Power Supply 230 VAC, Input: 2 Digital Sensors - one for chlorine and second for pH, Output: 4-20mA HART, IP66/67Protection / Tx protection cover required / Sensor Range 0-14 pH ,able to transmit digital signal totransmitter,calibration data can be transferred to Transmitter , process temp: 65 deg cen/ Sensor range:0.05 to 20 mg/l

supply , instalation , testing and commisioning of RTU with 3 analog input and 8 digital input for suitable to communicate signal for scada of pump houses as per requirements & specifications located at OHT's

Supplying,Installation and testing of Surveillance system as per requirements & specifications for all locations

Providing, Installation, Testing and Commissioning of ULTRASONIC LEVEL TRANSMITTER for Water Application : Principle : Time of Flight / Sensor MOC PP / Process Connection 1 1/2 inch BSP or 2 inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- inch BSP Threaded type / Power Supply: 24 V DC / Output: 4- 20mA / Display: Integral display for programming and Display Reading / IP 66

O &M Cost for 10 years after defect liability period 5% of project cost excluding Miscellnous works and O&M

SPML INFRA LIMITED

OFFSHORE INFRASTRUCTURES LTD

GVPR ENGINEERS LIMITED

LARSEN AND TOUBRO LIMITED