Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹10.1 L+₹1.1 L (12.8%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹10.5 L+₹1.5 L (16.8%)Rejected-Finance HATIA ROAD DANGALPARA DISTT DUMKA JHARKHAND PIN 814101 | DUMKA | DUMKA | JHARKHAND | 814101 | L3 | Rejected-Finance HIGH RATE |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
19 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Tapan Das, AE (Civ)
AGE (I) AF Singarsi
REPAIR TO RCC ROOF FACIA E BOARD LINTEL AND ALLIED WORKS OF MD OTM ACCN AT AF STATION SINGARSI UNDER AGE I AF SINGARSI
2023_MES_633030_1
C/8634/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) AF Singarsi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
AGE I AF Singarsi
₹18,000
Yes
14 Feb 2024
16 Dec 2023
22 Jan 2024
16 Dec 2023
19 Jan 2024
31 Dec 2023
Amount
Demolition of cement concrete (unreinforced) in roofs, floors other than ground floors beams staircases, landing, hajjas and similar suspended work, complete all as specified and as directed by Engineer-in-Charge.
M&L for PCC type B0 1:2:4 (12.5 mm Graded stone aggregate) as in roof padding, complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:4 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid separately.
M&L for Cleaning the roof surfaces and applying bitumen primer @ 0.30 kg/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.00 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying industrial bitumen 85/25 @ 1.2 kg/sqm on top surface, complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid water proofing compound.
M&L for Cleaning the roof surfaces and applying industrial bitumen 85/25 @ 1.2 kg/sqm on top surface,complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and laying 3mm thick self adhesive APP based polymeric membrane weighing not less than 3.00 kg/sqm reinforced with non woven polyester mat weighing not less than 150 gm/sqm, land on primed surface by force application method and, complete all as specified and as directed by Engineer-in-Charge.
M&L for prepration of surface and applying glass fiber base bitumen felt grade 2, over a coat of bitumen primer complete all as specified and directed.
Dismantling PVC water storage tanks of capcity exc. 250 litres & n. exc. 500 litres and removing from site, complete all as specified and as directed by Engineer-in-Charge.
S&F Rotational moulded polyethylene water storage tank including, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe anf fixed (min wt210 gram), complete all as specified in SSR Part I and as directed by Engineer-in-Charge.
S&F in repair Gun-metal ,globe or gate valves with iron wheel head , screwed both ends for iron pipe or for unions of 20mm dia bore and fixed all,complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing old AC sheet ceiling surfaces and applying one coats of white wash complete all as specified, complete all as specified and as directed by Engineer-in-Charge.
M&L for Applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface, complete all as specified and as directed by Engineer-in-Charge..
S&F for PVC(SWR) pipes in repairs 110mm dia for rain water pipes in single socketed in any length with rubber ring joints fixed to walls with including MS/PVC bracket complete all as specified and as directed by Engineer-in-Charge.
S&F PVC (SWR) bends 110mm dia in any radius,complete all as specified and as directed by Engineer-in-Charge.
M&L for Cutting chases, pinning in, Brick/stone walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for inserted AC/Steel sheet in walls and making good, cutting including painting to match the existing etc. exc.10CM but n'exc20CM girth,complete all as specified and directed by Engineer-in-Charge.
M&L for Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic coloured designer seamless tiles 350x250x7mm/450X350X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:4, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed by Engineer-in-Charge.
M&L for preparing old decorated plastered or un-plastered surfaces of celling, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and washing down with water complete all as specified and directed.
M&L for two coat of destempering 1st quality acrylic distemper (Ready mixed) having VOC content less than 50 gms/liter of approved manufacturer of required shade and colour complete all as per manufacturerer instruction over a coat Birla White Wall Care Putty ( thickness as required at site to make the surface even and smooth) on prepared wall/celling over prepared surface of wall/celling complete all as specified and as per manufacturer’s instruction complete all as specified and directed.
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracks and making good holes with birla white putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.
SHARMA ENTERPRISE
M/S KUMAR AVINASH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .