SPL REPAIR TO WORKER CANTEEN BLDG NO P/8 AT FAD AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

M&L for non-skid ceramic, joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors & skirting etc. over & including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade incl dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x600x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:3 incl dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic joint free coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L for non-skid ceramic joint free coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in skirting etc , over & including 10 mm thick cement mortar (1:4) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-22 mm thick, laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) and including dismantling of existing floor and removing rubbish off from the premises complete all as specified and directed.

M&L for kota stone slab 20-22 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including dismantling of existing floor and removing rubbish off from the premises complete all as specified and directed

M&L for fly ash brick old size straight or curved on plan.exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing rubbish off from the premises complete all as specified and directed

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water and removing rubbish off from the premises complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), using with water proofing compound complete all as specified and directed. (Note: WPC will be measured and paid separately)

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified and directed.

S&F wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12 mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam,chajja, facis, slab, lintel etc including taking down plaster of cracked portion and cutting grooves for receiving chicken wire mesh and making good the area by 15mm thick rendering in CM (1:3) and finally to match the surface with adjacent surfaces by applying white wash or cement base paint as applicable complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces of walls applying two or more coats of 100% premium acrylic emulsion (Exterior weather coat) paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for complete removal of old existing surfaces treatment of wall & applying two or more coats of 100% premium acrylic emulsion (Exterior Weather Coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with stainless steel wire staples, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over cement screed bed 15mm thick in CM (1:4)

M&L for three coats of white washing on newly plastered surface of ceiling/chajja including preparation of surfaces complete all as specified and directed.

M&L for two coats of white washing on old ceiling/chajja surfaces including preparation of old ceiling surfaces complete all as specified and directed.

M&L for preparation of old decorated painted surfaces any description and applying two coats of OBD including preparation complete all as specified and directed.

M&L for preparation of new plastered surfaces of old wall of any description and applying two coats of OBD over a coat of alkali resistant primer on newly plastered surfaces including preparation complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement roof surfaces complete all as specified and directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and directed by the Engr-in-Charge. (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height).

M&L for 10 mm thick rendering in CM (1:4) on fair faces of concrete surfaces of concrete finished with WPC the surface even & fair on top of the roof surface complete all as specified and directed (Note: WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

M&L for cement concrete 1:4:8, Type D-2 (using 40 mm graded stone aggregates) in foundations etc complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation and all as specified and directed.

M&L for hardcore of broken stone of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 50 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) finishing the surface even and fair with nominal reinforcement complete all as specified and directed (Note: Reinforcement will be measured and paid separately)

Taking down chowkhats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 Sqm but n.exc 4 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail including butt hinges complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators frame and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge for openable/sliding shutters) including all necessary fittings as directed

M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)complete all as specified and directed).

S&F glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 ,and shop coat of pink primer, including taking down shutters of any description.exc 1Sqm but n.exc 2 Sqm each complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note: M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately moisture proof and fire retardant)

S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.

S&F door closer hydraulically regulated, alluminium body, designation No. 3 universal type, suitable for door shutters up to 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified and directed.

S&F mortise lock, alluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed.

M&L for 300mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed

M&L for two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.

S&F in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor complete all as specified and directed.

S&F concealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed.

S&F as in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth, in brick walls, complete all as specified and directed.

M&L for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors complete all as specified and directed. (Note: Cutting chases and making good shall be measured and paid separately).

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed

S&F 15mm thick Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F kitchen sink of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets and west pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. (Make: Prayag/Nirali/Bluestar)

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F as in repair cast copper alloy, chromium plated towel rail 20mm dia D type 60cm long between two flange including bracket complete all as specified and directed.

S&F as in repair 50mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls , ceilings or in floor etc complete all as specified and directed..

S&F as in repair 100mm dia Grating with or without hole of PTMT (Minimum weight 25 gm) fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, complete all as specified and directed.

M&L for providing and filling epoxy putty into RCC/ PCC/ Stone masonry crack after opening up RCC/PCC/Stone masonry cracks in V- groove manner approximate 10 mm wide and 10 mm deep using mechanical cutter, properly cleaning the same to remove loose dust, dirt, etc. and finishing in line and level with existing concrete/masonry surface etc complete all as per manufacturer's instructions and procedures complete all as specified and directed. (Make: Pidilite/Sika/Fosroc/BASF)

Dismantling / taking down old existing unserviceable cement plaster loose/ unsound weaken cement concrete of any description and in any position from existing external/internal surfaces of RCC slab/RCC Beam/RCC Columns/RCC Lintels/RCC facia/RCC chhajjasetc. (up to maximum height of 10 metres from natural ground level) with power driven pneumatic chisel and including removal of debris complete all as specified and directed. (Make: Pidilite/Sika/Fosroc/BASF)

M&L for removing of cavities roughening the smooth surface scrapping out/removing corrosion all loose/scale/rust etc. from the visible reinforcement by applying rust remover @ 200 ml per Sqm or as per manufacturer's instruction , rust removal and cleaning the steel reinforcement properly and then applying 40 micron thick dry thickness coat of epoxy zinc rich primer @ 250 ml per Sqm or as per manufacturer's instructions of exposed and new steel reinforcement (measured flat) complete all as specified and directed. (Make: Pidilite/Sika/Fosroc/BASF)

M&L for applying two coats of epoxy based two component binder to bind old to new concrete chemical bond as per manufacturer's instructions and procedures complete all as specified and directed. (Make: Pidilite/Sika/Fosroc/BASF)

S&F in repairs vitreous china wash basin, white, flat back size 550x400mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc connections but incl brackets,wastevpipe,waste coupling complete all as specified and directed

S&F as in repair 110mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc including demolition PVC rain & removing from site complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel complete all as specified and directed

S&F as in repair PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.

S&F in repairs MS drapery rod of 25 mm dia of PVC coated in curtain rod complete all as specified and directed.

S&F in repairs MS PVC sheeted/powder coated bracket size 150 mm made to shape suitable for holding curtain/drap drapery rod of 25 mm dia of PVC coated in curtain rod complete all as specified and directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for reinforced cement concrete (nominal mix) type A1(1:1.5:3) (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for reinforced cement concrete (nominal mix) type A1(1:1.5:3) (using 20mm graded stone aggregates) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type A1(1:1.5:3) (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for reinforced cement concrete (Nominal Mix) type A-0 (1:1.5:3) (using 12.5 mm graded stone aggregate) as in chajjas and similar work complete all as specified and directed by Engineer in Charge.

M&L for reinfocement cement concrete (nominal mix) type A-1 (1:1.5:3) (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

S&F mild steel TMT bars 8mm and over, cut to lenghth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engineer in Charge.

All as per item No 81.00 mentioned here-in-above 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

Form work to chajja and similar work including edges for rough finished surfaces complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (horizontal or sloping) complete all as specified and directed

M&L 40 mm thick damp proof course in cement concrete type B-0, 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for brick work with fly ash bricks straight or curve on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of new surfaces of wall priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.

M&L for 100mm thick cement concrete type B- 2,1:2:4 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in floor for levelling course complete all as specified and directed by Engineer-in-Charge.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over screed bed or bedding layer of 15 mm thick with cement mortar (1:6) and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over screed bed or bedding layer of 10 mm thick with cement mortar (1:4) and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of bras scup pivots, catch spring and pulley wheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldered and or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

S&F vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed.

S&F 10Ltr PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.

Supply only flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed

S&F vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.

S&F Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.

S&F CP health faucet with 1.50mtr long tube & hook with necessary all fixing arrangements to fix GI water pipe connections complete all as specified and directed by Engr-in-charge

S&F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed complete all as specified and directed

S&F 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and directed

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed

S&F PVC flexible urinal waste pipe 1/2 inch dia fixed to urinal stall waste coupling complete all as specified and directed

S&F stop valve of 15mm bore, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

S&F CP tubular towel rail 20mm dia D type 60cm between two flange including bracket complete all as specified and directed by Engr -in-Charge

S&F PVC connection 15 mm size PTMT nuts of length length 600 mm complete all as specified and directed

S&F soap dish vitreous china white size 160x160x90mm approx complete all as directed by Engineer -in-Charge

S&F 20 mm dia bore steel tubing medium grade galvanized with all fittings and connection complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

M&L, for Concrete bed to 160 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) all as specified and directed.

Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with coupler, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. (Note: Necessary PCC haunching/benching/packing shall be measured and paid separately).

Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in oft/loose soil complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in column, piller, pier, post and struts etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete including taking down old unserviceable tank, complete all as specified and directed by Engineer-in-Charge. (Make: Sintex/Prayag/Vertex)

S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polyethylene ball screwed for iron pipe 25 mm dia with fly nut complete including taking down old unserviceable float valve complete all as specified and directed.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete including taking down old unserviceable gate valve complete all as specified and directed.

S&F in repair 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top three layered) confirming to relevant IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge (Make: Sintex/Prayag/Vertex)

E/M PORTIONS Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover fitted with chromium plated brass screws & washers and 1.5 Sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 134.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed

All as per item No 134.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 Sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 Sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and directed.

S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.

S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.

S&F in repair two single core ,6 Sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 Sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F in repair 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

S&F mirror 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

S&F wall mounted type decorative light fitting 1 x 10W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed.

S&F LED Bulb 15 Watt suitable for batten holder complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

S&F Vertical distribution board double door TPN 4 way with IP 43 multiphase outgoing suitable for mounting 63 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as specified and directed.

S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCCB of 4 pole , 415volts of capacity 63 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

M&L for earthing complete with galvanized mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate up to equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the earth testing register, prepared and to be maintained by the contractor & submitted to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with suitable size round three core connection wire for connecting connector to ceiling rose and galvanized flat iron, ceiling fan fixing clamp complete all as specified and directed and testing on completion. (Make: Havells Model Efficiencia Neo/Crompton Model Energion Cromair/Atomberg Renesa)

S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and directed. (Make : Havells/Bajaj/Orient)

Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length n.exc 0.5 metre) from ceiling rose to fan complete all as specified and directed by the Engr-in-Charge.

M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

Supply, laying / fixing / connecting, testing and commissioning of 35 Sqmm x 3.5 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge. (Note: Excavation, sand cushioning, brick will be measured and paid separately).

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and leveling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)

Supply and lay in trenches fly ash bricks, for cable protection complete all as specified and directed by the Engr-in-Charge.

S&F pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed.

Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/ poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and directed by the Engr-in-Charge. (Note: Excavation,sand cushioning,brick will be measured and paid separtely).

S&F wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating of capacity 1.5 TR complete all as specified and directed. (Make: Voltas/Blue Star/Carrier).

S&F Voltage Stabilizer for automatic operation single phase neaturally air cooled indoor type & designed for input variation between 130V to 280V with output Voltage Stabilizer at 220V to 240V with accuracy of + 2% and of capacity of 4 KVA with 15A plug top complete all as specified and directed. (Make: V-Guard or eqvt).

S&F circuit for wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 4 Sqmm and one 4.0 Sqmm PVC insulated FRLS cable with stranded copper conductor drawing into and including PVC Conduit complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 V and metal top complete all as specified and directed.

S&F GI pipe light grade of size 40 mm dia for wall/road crossing of cable, ISI marked complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door when MCB's to be used, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed.

S&F MCB TPN, 4P, 40 to 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F epoxy powder coated sheet metal enclosure for DBs, metal double door, Single pole and neutral 240V, 6 ways, IP43 with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

S&F MCB SPN 40-63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F MCB SP 40 to 63 AMP, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F blanking plats and to be housed in DBs complete all as specified and directed.

S&F flexible water drain out pipe of suitable size for indoor split type AC unit complete all as specified and directed.

KAZI SAHABUL ALAM

Hooghly Construction Co.

UNITED BUILDERS