IMPROVEMENT OF ELECTRICAL INFRASTRUCTURE BY WAY OF IMPROVEMENT OF HT/LT NETWORK AT VARIOUS LOCATIONS AS PER THE LIST OF THE WORKS MENTIONED IN THE SBD PERTAINING TO SUB-DIVISION KELLER UNDER PRI GRANTS ON TURNKEY BASIS

Amount

Supply, Loading, Transportation and Insurance of ST poles 9 mtr long 410-SP-33 164 Kgs with base plate and cap including transportation as per REC Standard

Errection, testing & commissioning of ST poles 9 mtr long 410-SP-33 164 Kgs with base plate and cap including transportation as per REC Standard

Supply, Errection, testing & commissioning of ST poles 8 mtr long 410-SP-15 119Kgs with base plate and cap including transportation as per REC Standard

Supply, Loading, Transportation, Insurance Transportation, Laying, stringing and binding of conductor including joints with PG clamps of required size 50 mm2 ACSR

Supply, Loading, Transportation, Insurance Transportation, Laying, stringing and binding of conductor including joints with PG clamps of required size 30 mm2 ACSR

Supply and laying of Cement bottoming 1:2:4 mix as per REC standards 0.45 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1700 mm for ST Poles for refilling the pit (the leftover pit after concreting to be filled with soil and boulders) NOTE: Please refer Pole drawings for details

Supply and Installation of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

Supply and Installation of 11KV D.O FUSE SET 3 Phase 400 Ampere Horn Gap

Supply and Installation of 11 KV LA SET 9 KVA ,10 KA,LA WITH Polymer ,Porcelain Housing Station Type

Supply and Installation of 185 mm² (2Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

Supplying and erection of GI channel (100*50*6)mm, (75x40x6 mm) , GI Angle( 50x50x6 mm), 50X50X6 mm angle support including clamps for Sub-Station Frame as per REC approved Drawings.

Supplying and erection of GI Channel “V’ cross-arm (75 x 40x6mm) with GI Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole structure. NOTE: Please refer Pole drawings for details

Providing and Fixing of 11 KV pin insulator Complete (Polymer/Porcelain) 5 KN With Pins

Supplying and erection of Danger Plates with clamps with writing in English and Regional Language

Providing and Fixing of LT Shackle Insulators with Muki clamps GI Flat iron (50*6)mm

Providing and Fixing of LT Fuse Set Complete Job

Providing and Fixing of Nut & Bolts GI

Supply and painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Supply and Installation of Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Supply and Installation of Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Supply and Installation of Pole Earthing Complete by GI Spiral Earthing, 8 SWG 115 turn coil earthing as per REC J-1 drawing

Identification of assets by marking of Transformer with white paint & marking of poles with Black paint at a height of 2.40 mtr from ground level. (Note : Mention Name of Scheme , Implementing Agency (JKPDD), Year of Implementing (2022-23)

Geo Tagged Photographs of high resolution (Pre and Post Photographs) Both hard and soft copy (for e-compendium) 4 Photographs Per site

M/S SOFI SONS

SHAMEEM AHMAD DAHAL

Sunbeam Enterprises

M/S S.B.ELECTRICALS