Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
13 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering work consisting of fabrication / erection / launching of Structural steel works. Note: Reinforcement Steel Quantity will not be considered for similar experience purpose.
21 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus ten percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
Hyderabad Division: Construction of a light shed for C&W models at STC/SC
25_DRM_W_HYB_26~SCR
25_DRM_W_HYB_26
Open
Works - General
6 Months
Hyderabad, Telangana
₹0
₹1.6 L
13 Apr 2026
21 Mar 2026
30 Mar 2026
69 items across 5 schedules · ₹58,00,061.14 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Beyond 10 km upto 20 km per km | cum-km | 5000 | 15.08 | 75,400 |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 500 | 494.1 | 2,47,050 |
| 3 | All kinds of soil | Sqm | 655 | 129.85 | 85,051.75 |
| 4 | All kinds of soil | cum | 154.86 | 177.5 | 27,487.65 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 92.92 | 196 | 18,212.32 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 100 | 392.15 | 39,215 |
| 7 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 23 | 8,752.55 | 2,01,308.65 |
| 8 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm / 125 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. | cum | 36 | 10,195.45 | 3,67,036.2 |
| 9 | 250x16 mm | Each | 11 | 193.7 | 2,130.7 |
| 10 | 200x10 mm | Each | 12 | 69.4 | 832.8 |
| 11 | Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 metre). | Sqm | 2.88 | 8,543.6 | 24,605.57 |
| 12 | Size of Tile 600 x 600 mm | Sqm | 24 | 1,464.85 | 35,156.4 |
| 13 | Size of Tile 600x600 mm | Sqm | 48 | 1,623.05 | 77,906.4 |
| 14 | 110 mm diameter | Metre | 200 | 377.4 | 75,480 |
| 15 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 532 | 738.65 | 3,92,961.8 |
| 16 | Ridges plain (500 - 600mm) | Metre | 40 | 532.35 | 21,294 |
| 17 | Crimp curve | Sqm | 25 | 496.75 | 12,418.75 |
| 18 | 1:4 (1 cement: 4 fine sand) | Sqm | 514.62 | 399.45 | 2,05,564.96 |
| 19 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 500 | 160.6 | 80,300 |
| 20 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | Sqm | 200 | 181.25 | 36,250 |
| 21 | Two or more coats on new work | Sqm | 600 | 146.8 | 88,080 |
| 22 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 56 | 2,434.25 | 1,36,318 |
| 23 | For thickness of tiles 10 mm to 25 mm | Sqm | 100 | 73.4 | 7,340 |
| 24 | Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. | cum | 25.5 | 2,818.9 | 71,881.95 |
| 25 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 135 | 1,045.65 | 1,41,162.75 |
| 26 | Providing and placing in position 100 mm thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads and lift, handling at site etc. all complete as per direction of Engineer-in-Charge. | Sqm | 300 | 3,081.95 | 9,24,585 |
| 27 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 3 | 8,006.6 | 24,019.8 |
| 28 | Orissa pattern W.C. pan of size 580x440 mm | Each | 2 | 3,169.05 | 6,338.1 |
| 29 | 15 mm nominal dia Pipes | Metre | 80 | 497.8 | 39,824 |
| 30 | 20 mm nominal dia Pipes | Metre | 80 | 537.6 | 43,008 |
| 31 | 100 mm diameter | Each | 4 | 193.95 | 775.8 |
| 32 | Frame size 45 x 85 mm | Metre | 20 | 926.35 | 18,527 |
| 33 | 30 mm thick | Sqm | 14 | 4,346.7 | 60,853.8 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .