SPL REPAIRS TO BLDG NO P-123 (OR MD ACCN) (08 QTRS) OF SATA BTY AT DIPATOLI UNDER GE DIPATOLI

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any description all as directed.

M&L for Brick work with flyash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc, complete all as directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces of fair faces of brick work/concrete (using WPC as per manufacturer instruction) and finished the surface fair and even complete as specified and directed (WPC shall be measured & paid separately)

M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface fair and even complete all as specified and directed.

M&L for rendering 5 mm thick in cement Mortar (1:4) on the surfaces of ceiliing/ chajjas and all concrete surfaces exposed to view using water proofing compound (WPC) as per manufacturer instruction and finished the surface fair and even complete all as specified and directed. (WPC shall be measured & paid separately)

Complete removal of existing treatment on wall/ ceiling surfaces complete all as directed.

M&L for preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified and directed

M&L for applying two coats of distemper (high quality) oil emulsion over a on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of white wash on ceiling surface complete all as specified and directed.

M&L for applying two coats of acrylic exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja (ceiling) over a coat of alkali resistant primer complete all as specified directed.

M&L for preparation of old plastered surfaces and applying two coats of white wash on wall surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beding layer all as directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick first or premium quality (any suitable size available in market) over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) first or premium quality area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) first or premium qualityarea of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in CM(1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in window cills, cooking platforms and including 20mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Taking out brick bats from sunken portion after demolition complete all as directed.

M&L for water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:-

Laying plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound " complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:3 on floor / vertical skirting side , even & smooth without using extra cement with and including using " Pidicrete URP" or equivalent make of sikka as per manufacturer instruction, complete all as specified and as directed.

M&L for applying two coats of proof coat black manufactured by Dr Fixit or equivalent as per manufacturers instructions all over and testing for water tightness by ponding of water for 72 Hrs, complete all as specified and as directed.

M&L for cement concrete 1:5:10 type E2 (40mm graded brick aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 100mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 75mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed.

M&L for PVC(SWR) Tee any radius 75mm dia, complete all as specified & directed.

M&L for PVC (SWR) bend /reducer any radius 110mm dia, complete all as specified & directed.

M&L for PVC (SWR) bend / reducer any radius 75mm dia, complete all as specified & directed.

M&L for PVC(SWR) Tee any radius 110mm dia complete all as specified & directed.

M&L for PVC(SWR) trap 110mm dia complete all as specified & directed.

S&F for 100mm bore branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as specified and directed.

S&F 75mm bore branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as specified and directed.

S&F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make all as specified and directed

S&F in repairs. vitreous china wash basin, white flat back size 550x400mm (excluding taps), incl.CP waste coupling & PVC waste pipe and brackets complete all as specified & directed.

S/F in repar vitreous China squatting pattern water closet 'orissa pattern ' size 580 x 440 mm white with integrated foot rests including provn of lime concrete complete all as specified & directed.

Taking up or down steel tubing and connection of 15 bore, complete all as specified.

Taking up or down steel tubing and connection of 20 bore, complete all as specified.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth.

M&L for 15mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connections in new or old position 15mm dia, including new fitting as required, complete all as specified & directed.

M&L for 20mm tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified & directed.

Refixing old steel tubing and connections in new or old position 20mm dia including new fittings as required, complete all as specified & directed.

S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified & directed.

S&F in repair angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore complete all as specified & directed.

S & F in repair angle valve 15mm of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

S & F in repair fancy type cast copper alloy pillar tap 15mm bore with chromium plated capstan heads, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified & directed.

S&F in repairs Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower, complete all as specified & directed.

S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges, complete all as specified & directed.

Dismantalling of existing water tanks and removinging and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. complete all as specified and directed.

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as directed.

M&L for pressed steel frames (125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified & directed.

M&L for cement concrete type C-0 (1:3:6) 12.5mm graded stone aggregate as in , fillings in steel frame , complete all as specified & directed.

S&F factory made 35 mm thick 2nd class HW glazed and Skelton door shutter (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.

S&F factory made flush shutter (40mm thick), solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as specified & directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size all as specified

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), complete all as specified & directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), complete all as specified & directed.

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

M&L for cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified & directed.

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth , complete all as specified & directed.

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.

S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete as directed , complete all as specified & directed.

S&F in repair soap Dish vitreous china Approx size 160x 160x90mm complete all as specified and directed

Removing all existing old treatment over RCC roof or Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc. complete all as specified and directed.

M&L for brushing neat cement slurry @ 3 Kg / Sqm on roof slab complete all as specified and directed.

M & L for 15mm th plaster fair finished using cement mortar 1:4 with WPC (as per manufacturer instruction) on roof slab complete all as specified and directed. (wpc shall paid separately)

M & L for oil based bitumen primer @ 0.3 L/Sqm on plaster surface complete all as specified and directed.

M & L for APP membrane 3mm th min wt 3kg/Sqm for water prooping of roof sealing with 100mm over lap complete all as specified and directed.

M & L for 2coats of alumunium paint over bituminous surface of membrane complete all as specified and directed.

M&L for cement concrete tiles 25 cm x 25 cm x 22 mm thick with grey cement and no pigment, machine pressed, set, jointed and pointed in neat cement slurry colour to match as in floors etc., over 15 mm thick screed bed in CM (1:4), complete all as specified and directed

Supply only integral water proofing compound, ISI marked complete all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete as per directed.

S&F stainless steel utensil rack of size 24 inch x 30 inch x 10 inch and 0.6 mm thick of approved quality and fixed in kitchen complete all as specified directed.

S&F kitchen sinks with drainage board made of stainless steel 1mm thick kitchen/ laboratory with plugs, washers, wastes, incl. beding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mmx 460mm bowl size, complete all as specified & directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as directed.

Taking down Old/ Unserviceable MCB DBs SPN/ TPN Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as directed.

M&L for point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 93 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 93 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 93 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No.93 here - in - before but one light point controlled by two 2 - way switches,with wire 1.5 Sqmm size

All as per Ser item No 93 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

S&F Switch Piano type 2 way switch 16 amp 230 v complete all as specified and directed.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.

S&F in replacement electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed .

S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed.

S&F lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed .

M&L for submain wiring complete with 2x 4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLSH cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 4 sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No-109 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire, complete all as specified & directed.

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix MCCB DB VTPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed.

S&F MCB SP( 6 to 32) Amp 240 volt 'C' curve 10KA, complete all as specified & directed..

S & F in replacement of 240V, 10KA MCB SPN 40 Amps "C" Series fixing in DBs, connecting with bottle type copper thimbles, complete all as specified & directed..

S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of LED tube light fitting 20 watt 230 Volt LED Lighting with polycarbonate housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size , complete all as specified & directed..

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity ,comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit, complete all as specified & directed..

M&L for rewinding repair with copper conductor including and greasing of ceiling fan of any size sweep single phase. Ceiling fan of any size opening from any height or any locations, fan opening from hook, clamp & refixing the same after cleaning and greasing with required necessary cutting/welding/granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as specified and directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts, complete all as specified & directed..

S & F for Highly efficient LED Bulbs, 9 W, used as a ready replacement for existing Old UNSV bulb lamp, complete all as specified & directed.

S&F in replacement PVC ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood , complete all as specified & directed..

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with aluminium conductor cable, complete all as specified & directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified and directed.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified and directed.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified.

Supply and laying, spreading dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement.

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed.

M &L for GI Earthing complete with GI earth plate electrode 60cm x 60cm x6 mm buried directly in ground verticvally to size of depth not less than 0.90x 0.60 x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised earth strip of size 25x3 mm, 7.5 mtr long by means of brazing nuts, bolts, check nuts, & washers ,testing of completion (drawn in earth lead protection pipe light gade GI of size 32/40 mm dia) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSR Part - I connected to earthing lead with Main switch/main control board,filling with charcoal dust 200 Kg, and common salt 100 KG , including necessary excavation and earth work in any type of soil ,perforated watering pipe,funnel with wire mesh,earth lead protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 8 mm dia TMT bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed by EIC Note : (i) 7.5 RM GI earth wire deemed to be included in quoted rates beyond 7.5 RM wire shall be measured and paid separately. (ii) Earth resistance of earth pit should be not more than 02 Ohms on testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to included salt & Charcoal upto & above 450 mm top of GI Plate.

M/S OMANIA ENTERPRISES (BID ID -3273887)

Pathak Brothers & Sons (BID ID -3273031)

Delhi Enterprises (BID ID -3274454)

MS JODHI PRASAD SINGH SONS (BID ID -3275257)

universal enterprises (BID ID -3275632)

M/S JUGNU SAHU (BID ID -3275300)

M/S AMOD KUMAR PANDEY (BID ID -3275374)

Bidder Name

M/s Mukesh and company