REPAIR AND POLISHING OF WOODEN FURNITURE AT MIL STN SANGRUR AND NABHA UNDER GE(S) PATIALA

Amount

TABLE DINING FOR 6 PERS (Drg No FD -273 & FD - 279) M & L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick prelaminated particle board (Make Archid/Novapan/ECCO) ISI marked and providing 6mm thick Teak beading all around.

Leg using Teak wood (MP Teak) .

Long rail using Teak wood (MP Teak) .

Short rail using Teak wood (MP Teak) .

Stiffener using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

MIRROR WITH SHELF : Drg No. FD-52M M & L for carrying out repair/replacement of following parts of Mirror with shelh as per drawing after removing the old unservicable parts complete all as specified Supply and fixing shelf of 18mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak edging all around.

Supply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/Swastik) with frame of Teak wood, back ply and hanging arrangement.

Applying two coat of french polish to complete article with shelf after necessary preparation of surfaces.

PEG TABLE (DRG NO.FD-384) : Repair/replacement of following parts of Peg Table as per drawing after removing the old unservicable parts complete all as specified Supplying and fixing the legs of Teak wood.

Supplying and fixing long rails of Teak wood.

Supplying and fixing short rails of Teak wood.

Supplying and fixing top of 18/19 mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak edging all around. .

Applying two coat of french polish to complete peg table after necessary preparation of surfaces.

TABLE BED SIDE MAP: (Drg No. FD/E6/MAP/15 'R') M & L for carrying out repair/replacement of following parts of Table bed side map as per drawing after removing the old unservicable parts complete all as specified S & F top of the table made of prelaminated particle board 18 mm thick make (Archid/Novapan/ECCO ) ISI marked and PVC edging (minimum thickness 1.6mm) shall be provide all around the top all as shown in drg .

S & F side of the table made of prelaminated particle board 18 mm thick make (Archid/Novapan/Duro ) ISI marked and 6mm thick Teak edging all around.

S & F side of drawers of the table made out of 12 mm thick comercial plywood Make (Kit ply/Duro/Green ply) ISI marked.

S & F Bottom of drawers using 6mm thick commercial plywood make (Kit ply/Duro/Green ply)

S & F back of table using 12 mm thick plywood commercial Make (Kit ply/Duro/Green ply)

S & F aluminum handle to drawers all as shown in drg.

S & F Hard rubber/PVC shoes to each legs all as specified and directed.

S & F steel channel to each drawer for Movement of pull out tray all as specified and directed.

Applying two coat of french polish to wooden surface after necessary preparation of surfaces.

TABLE BED SIDE (Drg No. FD-276) Repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified :- Leg using Teak wood (MP Teak) .

Side using 12 mm thick ply wood with one side teak finish. Make (Kit ply/Duro/Green ply).

Back using 6 mm thick ply wood commercial Make(Kit ply/Duro/Green ply).

Bottom using 12 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE CENTRE/TABLE CENTRE TWO TIER (Drg No FD-274) M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part. Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Archid/Novapan/ECCO ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.

Leg using Teak wood (MP Teak) .

Long rail using Teak wood (MP Teak) .

Short rail using Teak wood (MP Teak) .

Stiffeners of 2 tier table using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

CHAIR WRITING (Drg No. FD-280 & FD-1107) M & L for carrying out repair/replacement of following parts to chair writing, complete all as specified and shown on drgs after removing the old broken part. Legs made out of Teak wood

Rails made out of Teak wood .

Arms made out of Teak wood

Stiffners made out of Teak wood

Applying two coat of french polish to Chair writing/CBA after preparation of surface complete all as specified.

CHAIR DINING (DRG NO FD-279 & FD/MAP-II/5) Repair/replacement following parts to Chair dining complete all as specified and shown on drgs after removing the old broken part :- Leg using Teak wood (MP Teak) .

Rail using Teak wood (MP Teak) .

Stiffener using Teak wood (MP Teak) .

Supply and Fixing of PVC seat shall be woven with 2 mm wide cane plastic in Godrej pattern to chair dining (FD/MAP-II/05).

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

CHAIR EASY (DRG NO. FD-229 & 1108) Repair/replacement of following parts of Chair Easy as per drawing after dismantling the old parts :- Leg using Teak wood (MP Teak) .

Rails using Teak wood (MP Teak) .

Arms using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

M&L for removing old broken cane and recanning with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER brand cane to the following furniture articles:- Chair writing (Drg No FD-280 & FD-1107)

Chair dinning (Drg No FD-279)

Stool dressing CB (Drg No FD-282)

Chair Easy (Drg No FD-229 & FD-1108)

SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (DRG NO FD-281 / FD -373 / FD - 1113 Repair/replacement of following parts of Sofa set three seater /single seater with detachable cushion as per drawing after dismantling the old parts :- Long rails of seat for three seater sofa of size 1590mmx100mmx35mm of using Teak wood (MP Teak).

Side rail of size 575mm x 100mm x 35mm. of using Teak wood (MP Teak)

Long rails of seat for three seater sofa of size 1590mmx70mmx35mm of using Teak wood (MP Teak)

Long rails of seat of size 575mmx70mmx35mm of using Teak wood (MP Teak).

Arms using Teak wood (MP Teak).

Leg using Teak wood (MP Teak).

Sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM.

Applying two coats of French polish (ready made) to sofa three seater after necessary preparation of surfaces of sofa three seater

Applying two coats of French polish (ready made) to sofa single seater after necessary preparation of surfaces of sofa single seater

TABLE WRITING (DRG NO FD-275 & 240) Repair/replacement of following parts of Table writing as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Archid/Novapan/ECCO) ISI marked and 6mm thick Teak wood edging all around.

Leg using Teak wood (MP Teak) .

Long rail using Teak wood (MP Teak) .

Front of drawer and shutter of cabinet using 18mm thick prelaminated particle board (one side teak finish).

Shutter using 18/19mm pre-laminated particle board, Make (Archid/Novapan/ECCO) exterior grade, fixed with 2 Nos SS Hinges medium weight 75 mm all as shown in Drg.

Sides, bottom and shelf of cabinet using 12mm thick particle board.

Bottom of drawer and side of cabinet using 6 mm thick commercial plywood make Kit/green/national.

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

Supply and fixing knobs for drawers.

TABLE DRESSING GENTS WITH MIRROR (Drg N0. FD -230) M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified :- Top and side complete using 18/19mm thick pre-laminated particle board ISI Marked Make (Archid/Novapan/ECCO) exterior grade and 6mm thick Teak wood beading all around.

Bottom portion using 19mm thick Teak veneered (one side) commercial ply (other side) particle board decorated with phenol formal dehide Make (Archid/ Novapan/ECCO) including 4mm thick teakwood beading.

Side and back of drawers using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood, Front of drawer using 19mm thick commercial particle board over which 1.5 mm thick plastic laminated sheet is fixed and 3mm thick teak wood edging to be provided at all round of front of drawer.

Supply and fixing Chromium plated knobs for drawers.

Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard) with frame of Teak wood and back ply all as shown on Drg.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

SIDE BOARD (Drg No FD-241) M & L for carrying out repair/replacement of following parts of Side Board as per drawing after dismantling the old parts complete all as specified Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : ECCO/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.

Leg using Teak wood (MP Teak) .

Bottom and shelvs of side board using 18mm thick prelaminated particle board exterior grade, Make : Archidlam/ Novapan/ ECO, ISI marked including 4mm thick teak wood beading all around.

Back made out of 6mm thick commercial ply wood, Make (Kit ply/Duro/Green ply).

Side using 19mm thick prelaminated particle board Make : Archidlam/ Novapan/ ECCO, ISI marked.

Front of drawers made out of 19mm thick prelaminated particle board.

Door shutters using of 19mm thick prelaminated particle board fixed with continous piano type hinges.

Supply and fixing knobs for drawers and door shutter.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE DRESSING LADIES WITH MIRROR (Drg No FD -251) M & L for carrying out repair/replacement following parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part. Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard) with frame of Teak wood and back ply all as shown on Drg.

Top of table using of 18/19mm thick particle board decorated with phenol formal dehide with laminated sheet 1.5mm thick for one side, Make (Archid/Novapan/ECCO) including 6 mm thick teak wood beading all around.

Bottom portion and side using 18 / 19mm thick Teak veneered face on one side and another side commercial particle board decorated with phenol formal dehide Make (Archid/ Novapan/ECCO) including 4mm thick teakwood beading.

Side of table and front of drawer using 12mm thick teak wood plank with laminated 1.5 mm thick in one side.

Side and back of drawer using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood.

Supply and fixing knobs for drawers.

Leg using Teak wood (MP Teak).

supply and fixing plane sliding glass 5mm thick and aluminum channel having two 'U' shaped.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE 900mmx600mm WITHOUT DRAWER (Drg No FD -284) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Leg using Teak wood (MP Teak) .

Long side rail using Teak wood (MP Teak) .

Short side rail using Teak wood (MP Teak) .

Stiffener using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE 900mmx600mm WITH DRAWER (Drg No FD -283) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Leg using Teak wood (MP Teak) .

Long Side rail using Teak wood (MP Teak) .

Short Side rail using Teak wood (MP Teak) .

Stiffener using Teak wood (MP Teak) .

Side, back and front of drawers using 12mm thick teak wood plank and bottom of drawer using 6mm thick commersial plywood and shall be repair/replacement of guide rail of drawers whereever required.

Supplying and fixing Knobs for drawer .

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE 600mmx600mm SUNMICA TOP (Drg No FD-96 & FD-293) M & L for carrying out repair/replacement of following parts of Table 600mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : ECCO/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.

Leg using Teak wood (MP Teak) .

Long side rail using Teak wood (MP Teak) .

Short side rail using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE DINING FOR 8 PERSONS (Drg No FD-273) M & L for carrying out repair/replacement following parts to table dining for 8 persons, complete all as specified and shown on drgs after removing the old broken part. Top 1800x900mm made out of 18/19mm thick prelaminated particle board exterior grade, Make - Archid/Novapan/ Ecco) ISI marked and including 4mm thick teak wood beading all around.

Legs using Teak wood (MP Teak).

Long rails using Teak wood (MP Teak).

Short rails using Teak wood (MP Teak).

Stiffners using Teak wood (MP Teak).

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

BED HARD PLYWOOD TOP (Drg FD-246) M & L for carrying out repair/replacement of following parts of Bed hard as per drawing after removing the old unsv parts complete all as specified and shown on drgs. Top using 12mm thick commercial plywood, Make (Kitply/Duro/Green/National Ply) ISI marked.

Head board using Teak wood (MP Teak).

Long rails using Teak wood (MP Teak).

Foot board using Teak wood (MP Teak).

Stiffners using Teak wood (MP Teak).

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TEAPOY FD (Drg No. FD-382) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after removing the old unservicable parts complete all as specified. Top using 18/19mm thick prelaminated particle board (Make Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak wood beading all around.

Leg using Teak wood (MP Teak).

Long rails using Teak wood (MP Teak).

Short rails using Teak wood (MP Teak).

Stiffeners using Teak wood (MP Teak).

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

STOOL DRESSING LADIES (Drg No. FD/E6/MAP/14) M & L for carrying out repair/replacement of following parts of stool dressing ladies as per drawing after dismantling the old parts complete all as specified. Top using 12mm commercial ply wood, Make (Kitply/Duro/Green/National Ply) ISI marked

Leg using Teak wood (MP Teak).

Long rails using Teak wood (MP Teak).

Short rails using Teak wood (MP Teak).

Stiffners using Teak wood (MP Teak).

Cushion seat 75 mm thick foam of 32 density covered with good quality tapestry cloth seat (cost of cloth not less than Rs 150 per mtrs) as approved by GE, MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

BOOK CASE SMALL (Drg No FD-237) M & L for carrying out repair/replacement of following parts of Book case as per drawing after dismantling the old parts complete all as specified Top made out of 19mm thick prelaminated particle board exterior grade, Make : Archidlam/ Novapan/ECCO ISI marked and 4mm thick teak wood beading all around.

Leg using Teak wood (MP Teak).

Back using 6mm thick commercial ply wood.

Side made out of 12 mm thick commercial ply wood teak veneered one side.

Shutter of cabinet made out of 18/19mm thick particle board fixed with continious piano type hinges.

Knob using chromium plated.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

CHAIR DINNING WITH CUSHION (Drg FD/E6/MAP/10'R') M & L for carrying out repair/replacement of following parts of Chair Dinning Book case as per drawing after removing the old unservicable parts complete all as specified and shown on drg. Legs using Teak wood (MP Teak).

Rails using Teak wood (MP Teak).

Stiffners using Teak wood (MP Teak).

Seat using 12mm thick BWR phenol bonded plywood over with 75mm thick 40 density foam cover with quality fabric cloth (cost of cloth not less than Rs. 150/- per meter) as approved by GE

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

BIN SOLID MULTIPURPOSE (Drg FD/E6/MAP/09) M & L for carrying out repair/replacement following parts to bin solid as per drawing after removing the old unservicable parts complete all as specified and shown on drgs Top using 18/19mm thick prelaminated particle board Make : Archidlam/ Novapan/ ECCO, ISI marked and 4mm thick teak wood beading all around.

Legs using teak wood (MP Teak).

Back using 18/19mm thick prelaminated particle board.

Side, shelves and drawer using 18/19mm thick prelaminated particle board Make : Archidlam/ Novapan/ ECO, ISI marked.

Stiffners using teak wood(MP Teak).

Door shutters using of 18/19mm thick prelaminated particle board fixed with continous piano type hinges.

Supply and fix CP MS handle

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

ALMIRAH M/U WOODEN (Drg No FD -93(M) M & L for carrying out repair/replacement of following parts of Almirah M/U wooden comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified Top using 18/19mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Ecco

Shutters using 18/19mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco, fitted with continous piano type hinges and 6mm thick Teak wood edging all around.

Leg using Teak wood (MP Teak).

Back of almirah using 12mm thick commercial plywood make (Kitply/Duro/Green/National) all as per drg.

Sides using 18/19mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco.

Selves using 18/19mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Eco.

S & F in replacement of Hasp and Staple using Stainless Steel 150 mm long.

S & F in replacement of Chromium plated handle 100 mm long.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE OFFICE OFFICER (Drg No DW) M & L for carrying out repair/replacement of following parts of table office officer comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified Top using 18/19mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Ecco including 6mm thick Teak beading all around.

Side, back and bottom of Cabinet using 25mm thick second class hard wood planks.

Side, front and back of drawer using second class hard wood planks.

Bottom of drawer using 6mm thick commercial plywood.

Shutter of cabinet using 25 mm thick hard wood planks with s/s hinges

Stiffners using teak wood

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE OFFICE CLERK (Drg No DW) M & L for carrying out repair/replacement of following parts of table office Clerk comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified Top using 18/19mm thick prelaminated particle board ISI Marked Make- Archid/Novapan/Ecco including 6mm thick Teak beading all around.

Side, front and back of drawer using second class hard wood planks.

Bottom of drawer using 6mm thick commercial plywood.

Leg using Teak wood (MP Teak).

Rails using Teak wood (MP Teak).

Stiffners using teak wood

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE 900mmx900mm WITHOUT DRAWER (Drg No FD -291) M & L for carrying out repair/replacement of following parts of Table 900mmx900mm as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Leg using Teak wood (MP Teak) .

Long side rail using Teak wood (MP Teak) .

Short side rail using Teak wood (MP Teak) .

Stiffener using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

SAFE MEAT AND MILK (Drg No FD -369) M & L for carrying out repair/replacement of following parts of SAFE MEAT AND MILK comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified Leg using Teak wood (MP Teak).

Rails using Teak wood (MP Teak).

Shelvs using teak wood scantling

Bottom using teak wood planks

Top using teak wood frame and covered with wiremess to inner side , complete shown on drg.

Supply and fix 25mm thick kota stone complete all as per drg.

Supply and fix wiremess to four sides

Applying two coat of synthetic enamel paint white (make-Berger/Asian/Narolac) to complete article after necessary preparation of surfaces.

HOT CASE / HOT CASE LARGE M & L for carrying out repair/replacement of following parts of HOT CASE / HOT CASE LARGE comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified Top using teak wood frame and 18 mm thick prelaminated particle board and covered with aluminum sheet 1mm thick to inner side of hot case, complete shown on drg.

Supply and fix 25mm thick kota stone complete all as per drg.

Legs using teak wood (MP Teak).

Back using 12mm thick commercial plywood and covered with aluminum sheet 1mm thick to inner side.

Side and bottom using 18mm thick prelaminated particle board Make : Archidlam/ Novapan/ ECO, ISI marked and covered with aluminum sheet 1mm thick to inner side of hot case .

Stiffners using teak wood(MP Teak).

Shutters of cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges and covered with aluminum sheet 1mm thick to inner side of cabinet.

Supply and fix CP MS handle

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

BOARD NOTICE 1500 X 1220 mm M & L for carrying out repair/replacement of following parts ofBOARD NOTICE 1500 X 1220 mm comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified Long rail using teak wood (MP Teak).

Short rail using teak wood (MP Teak).

Back using 18mm thick shoft board and covered with blazer cloth in one side

Supply and fix aluminum channel 'U' shape of 1.5mm thick for movement of sliding glass.

Supply and fix plane glass 5mm thick

Supply and fix hooks for hanging of notice board

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

M/s Harmans

Arneja Builders

SUNIL TRADERS