Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC SHARADA SMRITI H NO 840 VINAYAK KATHE ALI KEGAON ROAD URAN NAVI MUMBAI 400702 | RAIGAD | MAHARASHTRA | 400702 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹24.9 L+₹1.2 L (5.02%)Rejected-Finance GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹26.8 L+₹3.1 L (13.3%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹27.3 L+₹3.6 L (15.2%)Rejected-Finance 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance BEING NOT L1 | |
| 5 | L5₹27.4 L+₹3.7 L (15.7%)Rejected-Finance | L5 | Rejected-Finance BEING NOT L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
9 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
REPAIR / REPLACEMENT OF STEEL ROLLING SHUTTERS, MS DOORS, GATE UNDER AGE B/R-II AT NAVAL STATION KARANJA
2022_MES_542475_1
8568/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KARANJA
REPAIR / REPLACEMENT OF STEEL ROLLING SHUTTERS, MS DOORS, GATE UNDER AGE B/R-II AT NAVAL STATION KARANJA
8 documents required · 8 mandatory
₹500
Yes
GE (NW) KARANJA
₹70,000
Yes
20 Dec 2022
1 Aug 2022
12 Sept 2022
1 Aug 2022
9 Sept 2022
16 Aug 2022
1 Aug 2022 - 16 Aug 2022
Amount
Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement, complete all as specfified and directed.
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified.
M&L rendering 5mm thick in CM 1:3 on ceiling finished even and smooth finish complete all as specified and directed.
M & L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed
M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.
M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.
Attending complaints in repair related to black smith work including repair of steel frames of doors and gates, by drilling or welding, resecuring of door or gate etc complete all as specified and directed by Engineer in Charge
Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed.
-Ditto- as per Item No.09 above but area of shutters exc 10 sqm and n.exc 20 sqm each
-Ditto- all as per srl item No.09 but area of shutter exc 20sqm but not exc.50 sqm each Note for Srl Item No. 09,10 & 11 (i) Spare parts for Srl item No.09, 10 &11 will be measured and paid separatly under relavent items and Rate quoted shall include for scaffolding to any height , covering etc, complete all as specified and directed by Engineer-in-charge
Note for Srl Item No. 09,10 & 11 (i) Spare parts for Srl item No.09, 10 &11 will be measured and paid separatly under relavent items and Rate quoted shall include for scaffolding to any height , covering etc, complete all as specified and directed by Engineer-in-charge
S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed.
S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and as directed
S&F factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and as directed
S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed
S&F rubber sponge gasket of 20mm thick and 40mm width fixed with and including approved adhesive complete all as specified and directed.
S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified and directed.
S&F mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters complete all as specified and as directed.
S&F mild steel pressed beval handles 150mm long, oval type, enamelled black for rolling shutters all as specified and as directed.
S&F mild steel safety lever lock with 4 levers for rolling shutters all as specified and as directed.
M&L in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area n.exc 10sqm each complete all as secified and as directed.
M&L in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area exc 10sqm and n.exc 20sqm each complete all as specified and as directed.
M&L in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area .exc 20sqm and n.exc 50sqm each complete all as secified and as directed.
Dismantling of steel rolling shutter in any position in any size including all fittings complete all as secified and as directed.
Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured)
S&F rolling shutter without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position including all necessary pats etc as indicated, complete: gear operated type with bevel gear box and crank. complete all as secified and as directed.
S&F rolling shutter without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position including all necessary pats etc as indicated, complete: push pull or manual type
Dismantling structural steel works in doors, gates etc but excluding framed truss etc all as specified and directed
S&F framed work in doors or gates of angle or framed work such as grill, grating, etc, other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.
S&F 1.00 mm thick Mild steel, plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holespunched; includinground headed screws,clout nails or rivets and fixed /welded to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc complete all as specified and as directed.
M&L for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed.
M&L for preparing old painted steel surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed
M&L Painting to new steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic paint. complete all as specified and directed by Engineer-in-Charge
S & F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as directed by Engineer-in-Chage
S&F collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and as directed.
Chipping , removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries outside the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force.
M&L for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.
M&L for applying two coats of Epoxy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer
M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd.
M&L for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling etc complete
M&L for Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete)
M&L for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit complete all as specified and directed.
Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.
(Note:- All ser No item rate shall be include any height of Bldgs for scafolding as all arrangement.)
M/s S.D Construction Co
D.N.PATIL
Mahadev Enterprises
Dinesh Enterprises
Har Siddhi Buildcon
S N TRADERS
M/s Vishwakarma Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .