REPAIR TO PROTECTIVE WORK, FENCING, BOUNDARY WALL AND BOUNDARY PILLAR AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Dismantling post or struts (Wood, steel or RCC) any section and size including taking out embedded portion and making good disturbed ground in natural ground, complete all as specified and directed.

All as per Srl Item No 01.00 above but for post embedded in concrete

Dismantling fencing wire mesh, any type, complete all as specified and directed.

Excavation in post holes n.exc. 0.5 Cum and getting out in hard/dense soil, complete all as specified and directed.

S&F angle iron as in posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 gde E-165 complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed.

Supply only chain link MS galvanised fencing, of size 4mm(8 SWG) 75mmX75mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for fencing post, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410W (Gde E-250) quality A or Fe-290 (Gde E-165) complete all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S&F 12 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm long & n exc 10 cm complete all as specified and directed.

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation footings plinth beams etc in hard/dense soil complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed

M&L for brick work with Sub class 'B' brick straigth or curved on plan exc. 6m mean radius built in cm 1:6 complete all as specified and directed.

M&L for brick work with Sub class 'B' brick straigth or curved on plan exc. 6m mean radius built in cm 1:6, but (EXCEPT BRICKS), complete all as specified and directed. Note: Bricks as obtained from srl item no14 here in before shall be reused.

Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cm (1:6) on other than fair faces of brick work or concrete surfaces finished & even and smooth without usnig extra cement, complete all as specified and directed.

M&L for preperation of new plastered surfaces wall applying two coats of cement base paint, complete all as specified and directed.

M&L for applying one coats of cement base paint incl preparation of old plastered surfaces complete all as specified and directed.

M&L for PCC 1:2:4, type B-2, using 40 mm graded crushed stone aggregate as in foundations, filling and mass-concrete, complete all as specified and directed.

S&F framed work such as framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde, E-165, complete all as specified and directed.

M&L for RCC M-25 (design mix) as in columns, pillars, piers, posts & struts using 20mm grded aggrigate complete all as specified and directed.

M&L for Use and waste of formwork to sides of pillars, posts, struts, piers, columns & stanchions incl fair finishes of surfaces complete all as specified and directed.

M&L for 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirmining complete all as specified and directed.

All as per srl item No-25 above herein before but 5mm dia and over up to 10mm dia bars as in strirups spacers binders etc complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Punched tape concertina coil 610 mm dia, made out of 2.60 mm dia (+ - 0.05 mm) high tensile spring steel wire (1620 MPA) with having zinc coating of 120 gms/Sqm as per IS: 228.Each coil having a min 50 turns (Circles), average weight 7.50 to 8 Kg (+ -) 5% including handle and spikes at both ends of coil erect and fixed on top of the 'Y' Shape fencing, tied to the barbed wire/angle iron with suitable GI binding wires complete all as specified and directed. Specifications : Diameter : 610 mm No of Rounds : 50 rounds Stretch of each coil : 6-8 meter Total length of straight wire in each coil : 94.26 Meter barb Length (mm) : 11.50 mm (+- 2.00 mm) Weight of each coil : 7.50 to 8 Kg

Returning filling in including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc. 1.50 M above the starting point. (including filling in floor) for any type of soil complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not other wise complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor tiles complete all as specified and directed.

M&L for chequered cement concrete tiles pre polished 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors.complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

Supply, fixing, providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Neelkanth Engineers

m/s jupiter builders