S/R to E.I in the Prisoner wards, Replacement and Installation of Additional secuiryt lights with cable in the campus of Divisional Jail, Garhwa.

Wiring for light point/fan point/exhaust fan point/call bell point, with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, piano type switch,phenolic laminated sheet with suitable size PVC/MS box etc as required

Group A

Supplying and fixing suitable size GI/PVC box of 75 mm x 75 mm x 50 mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch. connection, painting etc. as required (For light plugs to be used in non residential buildings )

Supplying and fixing suitable size GI/PVC box of 121 mm x 173mm x 48mm/(6" x 8") (nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch. connection, painting etc. as required

Wiring for light/power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1 No 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc as required.

Wiring for circuit/ submain wiring along with earh wire with the following sizes of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit as required

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire(for light circuit )

2 x 4.0 sq.mm + 1 x 4.0 sq.mm earth wire (for light submain )

2x6.0 sq mm + 1x6.0 sqmm earth wrie (For powre submain)

Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.

1200mm (48") Ceiling Fan

450 mm (18") metal body wall fan with speed regulator suitable for single phase 220 V, 50 Hz AC supply.

15'' (380mm) metal exaust fan .

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc. as required.

Electronic step fan regulator, Deluxe

15/16Watt LED Bulb

Supplying and fixing Batten / Angle holder including connection etc as required .

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2 way, Single door

4 way, Single door

6 way, Double door

8 way, Double door

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 KA, “B” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

6/32 amps, single Pole, "B" series

Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required.

32 amps, double pole

Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

32 amps, TPN (for high mast light)

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

63 amps, 16 KA, fixed thermal setting ( for Panel MCCB )

S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required

120W LED Street light

S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-5 and shall be complete with all neccssary accessories as required

90/100W LED Flood light

200W LED Flood light

S.I.T.C of following rating Post top lamp made in die cast aluminium housing with decorative clear/opal acrylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc. all complete as required.

40/45W LED Post top lamp clear

Supplying and fixing Cable junction Box with MCB (Make-Sintex/Hensel or equivalent )

Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC conduit including dismantling as required

3 x 1.5 sq.mm (for Led light connection)

6 sq. mm, 2 core (for Flood light on the Prisoner Wards)

10 sq. mm, 4 core (for High mast Power Supply 37mtr,pole light and watch tower 594 Mtr)

35 sq. mm, 3.5 core (for outdoor Feeder Panel Incoming Power Supply )

10sq.mm. aluminium lugs

35sq.mm. aluminium lugs

65mm dia, medium class GI pipes( For road crossing of Cables)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm directr in ground including excavation, and refilling the trench etc as required, but excluding sand cushioning and protective covering.

80mm dia Earthing Electrode 2mtr. Length / 80mm dia Earthing Electrode 3mtr. Length / 50mm dia Earthing Electrode 2mtr. Length/50mm dia Earthing Electrode 3mtr. Length & Backfill Compound chemical 4 Bag(per bag 25 KG)

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Fabrication and installation of cubical panel with following accessories made of 16 SWG M.S sheet painted with one coat steel primer and two coat power spray painting with approved shade making PCC plinth and foundation including fitting / fixing / connection & transportation up to work site , labour charge etc all complete.

63 amps, 10 KA, fixed thermal setting-1 Nos

40 amps, TPN- 3 Nos

40 amps, DP- 4 Nos

LED Indicator lamp R/Y/B/G- 3 Nos

25mm x 5mm copper strips (1.15 kg/mtr)- 12 kg

EPR insulated/PVC sheathed copper conductor trailing cable 5core 2.5 sq.mm. (for high mast)

6mm dia stainless steel wire rope of bracking load capacity 2350 kg x 2 for 20 mtr high mast.

twin dome aviation light for highmast.

Labour Cess @ 1%