SPECIAL REPAIR TO BLDG NO T-26/F1, T-26/F2,T-26/F3 (GUARD ROOMS), T-26 (BC) (BLOCK SIDE OF 26TH MALL, ROAD NASIRABAD

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm rendering in CM 1:4 on fair face of wall or on stone masonary surfaces finished even mixed with water profinfing compound (WPC) and smooth without using extra cement complete all as specified and directed. Note : WPC will be Measured and paid seperately.

Supply only liquid water proofing compound ( For external plaster surfaces) complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth ,without using extra cement, over and including dubbing coat (if required) complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 5mm thick as in ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali&fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces including surface preparation complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care white putty on plastered surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 1mm thick wall care white putty on wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of white wash on wall surface complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc including necessary hammer dressing and coping with necessary form work, complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed.

M&L for 25 mm thick cement concrete, type B-0, 1:2:4 (Using 12.5mm crushed stone aggregate), finishing cement concerete surface even and smooth without using extra cement complete all as specified and directed.

M&L, for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete Including M&L for 25mm thick cement concrete B-0, 1:2:4 (USING 12.5MM) graded aggregate and Demolition kota stone & PCC of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L kota stone slab 20-+25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete inlcuding 10 mm thick rendering in vertical surface of brick / PCC block wall in cement mortar 1:4 and including demolition of old kota stone dedo complete all as specified and directed.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

M&L non skid (Matt finish) ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 600x1200mm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade10mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm, in floor etc set and jointed in 3mm width epoxy filling in white or coloured match to tile, including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/ flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and oints filled with bitumen mastic 1:3 complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment coloured, reflective type of approved quality includong 25mm thick sand filling under floor in foundation including watering and consolidation complete all as specified and directed.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m complete all as specified and directed.

Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed.

Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

M&L roof treatment with APP modified polymeric water proofing membrane, 3 mm thick having centre core not less than 100 mircron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed.

Dismantling loose / disintergrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50sqm not exc4.00 Sqm each and complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each and complete all as specified and directed.

S&F pressed steel frame of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.

M&L for PCC type B-0, 1:2:4 using12.5 mm graded stone aggregates as in bands, bed blocks, fixing hold fasts, filling of door frames etc complete incl necessary formwork complete all as specified and directed.

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as specified and directed.

S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and directed.

S&F for factory Solid PVC MouldedDoor Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core as per specification & drawing in the frame at site complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets and Supply & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, complete all as specified and directed.

Taking down old u/s steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F MS butt hinges, medium weight, cold rolled, ISI marked of size 100mm, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs 150 mm long door stopper of alumunium alloy body door stopper fixing on door, complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and directed.

S&F Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping crews as specified complete all as specified and directed.

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guisides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-0 or Fe310-0 complete all as specified and directed.

M&L framed work as in doors or gates of angle, hollow or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed.

M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Rounding to edges of stone slab one edge, such as steps, window cill stone, cooking platform, and other similar situations and rubbing and polishing complete all as specified and directed.

Supply and Fixing in repairs 18/19mm thick MDF board one side laminated decorative type with decorative face veneer on one face fixed complete including teak wood lipping 19x6mm thick fixed with nails in shelves,partition and palmet boxes,shelves,almira book cases,toilet boxes,racks,cup board shutter and similar works complete all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 30 mm complete all as specified and directed.

S & F PVC body magnetic door catches with striking plate complete all as per sample held with GE office complete all as specified and directed.

S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified and directed.

Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. Note : Measured over all as fixed along the centre line over the fittings and accessories.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.

S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 25mm GI water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair wash hand basins vitreous china, coloured flat back size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed.

Supply and Fixing in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and directed.

S&F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed.

S&F in repairs grating round 140mm dia stainless steel fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed.

Supply and Fixing in repair PVC water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and directed.

S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed.

Supply and fixing in repairs for Toilet fittings Health faucet complete all as specified and directed. Make : Jaquar or equivalent/Prayag Cat No. 452.

S&F in repair rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed. Make: Syntex, Polycon

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali&fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces including complete removal of existing treatments complete all as specified and directed.

S&F in repairs of 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed for the following :

One light point/bell point/ceiling light/exhaust fan controlled by one way 5 Amps single pole switch

One 5 pin 5 Amps socket outlet on same board with other switch

One 5 Pin 5 Amps socket outlet on independent board with other switch

All as per item No 98.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed.

S&F in repair of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed.

S&F in repair of switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed

S&F in repair of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed.

S&F in repair of socket out let 2 in 1,multipurpose 3 pin 15/16 complete all as specified and directed.

S&F in repair stepped type ( switch type) electronic ceiling fan regulator flush type, AC, 230 volts, complete all as specified and directed.

S&F in repair of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed.

S&F in repair in repair lamp holder including 9W LED Bulb PVC/polycarbonate type with back plate complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in repair in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed.

M&L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through existing concealed conduit incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

S & F in repair of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S&F in repair of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed.

S&F in repair of MCB TPN 63 Amp capacity,415 volt complete all as specified and directed.

S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F in repair of in repair MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed.

Taking down UNSV Fan and deposite to MES Store yard ,Supply and fixing ceiling fans (BLDC) complete with blades, down rods, remote and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with motor, blade set of three nos , down rod, canopy, shackle assy including copper wire of size 0.5sqmm from ceiling rose to fan connector complete all as specified and directed.

Taking down UNSV Geyser and deposite to MES Store yard and Supply and fix in repair electric water heater, storage type steel body with fiber flass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated including complete water connection complete with all accessories such as safety valve, thermostate,stop valve, bib tap,flexible pipe etc complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket,clamps and nuts,bolts etc complete all as specified and directed.

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level.

Please Enable Macros to View BoQ information