Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.1 LAccepted-AOC NO 9 6 203 1 G2 DURGA BHAVANI NAGAR CHAMPAPET HYDERABAD 500059 | HYDERABAD | TELANGANA | 500059 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹50.0 L+₹50,986.90 (1.03%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹51.2 L+₹1.7 L (3.53%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹52.7 L+₹3.2 L (6.49%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹52.9 L+₹3.5 L (7.01%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47.4 L
EMD Value
₹94,860
Closing Date
17 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
ADDITIONAL / ALTERATION TO BUILDING NO 52 AT DIRECTORATE OF DOIP OF ASL ( AT DRDL PREMISES) HYDERABAD.
2023_MES_620823_1
GE I KBAGH TOKEN 78 OF 2023 2024
Open Tender
Civil Works
Item Rate
240 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹94,860
Yes
22 Dec 2023
27 Sept 2023
19 Oct 2023
27 Sept 2023
17 Oct 2023
11 Oct 2023
27 Sept 2023 - 4 Oct 2023
Amount
BUILDING:
Demolishing cement concrete nominal concrete 1:4:8 or leaner mix (i.e equivalent design mix manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge.
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, for door/ window/ clerestory window all complete as per direction of Engineer-in-Charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. meters and below including Chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement in 1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. for Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. for weather shade, Chajjas, corbels etc., including edges
Centering and shuttering including strutting, propping etc. for Suspended floors, roofs, landings, balconies and access platform Suspended floors, roofs, landings, balconies and access platform
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide
Thermo-Mechanically Treated bars of grade Fe-500D or more steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete
M & L for anti termite treatment to the bottom and sides of excavation at the rate of 5 liters of emulsion per square meter of surface area
M & L for anti termite treatment to the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square meter of vertical surface (Area of the substructure in contact with backfill to be measured)
M & L for anti termite treatment to the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/ Lindane E.C. 20% with 1%concentration
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc. with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
Brick work with fly ash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling with road roller/ hand role
Hardcore of gauge not exc. 63mm, deposited, spread and leveling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder:
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
15 mm cement plaster in 1:4 (1 cement : 4 fine sand)
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
15 mm cement plaster in 1:6 (1 cement : 6 fine sand)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
Supply only Water proofing material (WPC)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including water thinnable priming coat with cement primer
White washing with lime to give an even shade on New work (three or more coats)
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives on New work (Two or more coats applied @ 1.43 liter/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm complete all as specified.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives on New work (Two or more coats applied @ 1.43 liter/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm complete all as specified.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including water thinnable priming coat with cement primer complete all as specified.
White washing with lime to give an even shade on Old work (two or more coats)
Demolishing mud phaska in terracing and disposal of material within 50 meters lead.
Cleaning the old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg / Sqm on concrete surface complete all as directed.
Grading roof for water proofing treatment with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size)
Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand)
Providing and laying 3.5mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2.5mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 liter/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ liter and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. Note:- Work shall be executed through authorised applicator only.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead, thickness of tiles 10 mm to 25 mm
Providing and laying Double charge vitrified tile polished finish of size 600 x 600 mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Providing and laying 600 x 600 mm Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 15mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, Providing and fixing factory made P.V.C. door frame of size 50x47 mm with wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitered at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge
Providing and fixing to existing door frames 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitered and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)
Powder coated aluminium (minimum thickness of powder coating 50 micron) shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Providing and fixing anodized aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) , EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item)
Providing and fixing 18 mm thick Granite stone slab colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, Area of slab over 0.50 sqm, machine cut for kitchen platforms, vanity counters, window sills, facials and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
Providing and fixing 100x75x3.50 mm ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete
Providing and fixing 150 x 10 mm aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
Providing and fixing 125mm aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete of size 300x16 mm.
Painting with synthetic enamel paint one or more coats on old work of approved brand and manufacture of required colour to give an even shade
Painting with aluminium paint one or more coats on old work of approved brand and manufacture to give an even shade
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of serviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
Dismantling water tanks of capacity 500 ltr and removing to store complete
Providing and placing on terrace (at all floor levels) polyethylene water storage tank three layered, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing 20 mm nominal bore, 120 mm long, weighing not less than 198 gms PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball
Dismantling G.I. pipes 15 to 20mm (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge
Providing and fixing 15 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
Providing and fixing 20 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
Providing and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require , White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required , Single half stall urinal with 5 liter P.V.C. automatic flushing cistern
Providing and fixing 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931
Providing and fixing 15mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
S&F cast iron floor trap of 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified & as directed.
Providing and fixing square-mouth S.W. gully trap class SP-1 180x150 mm size P type complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing soil, waste and vent pipes 75 mm diameter Sand cast iron S&S pipe as per IS: 1729
Providing and fixing soil, waste and vent pipes 100 mm diameter Sand cast iron S&S pipe as per IS: 1730
Providing and fixing single unequal plain invert branch of required degree of size 100x100x75 mm Sand cast iron S&S pipe as per IS: 1729
S&F CI cowl 100mm bore fixed to CI pipe complete all as specified and directed.
Providing and fixing plain bend of required degree 75 mm diameter Sand cast iron S&S pipe as per IS: 1729
Providing and fixing plain bend of required degree 100 mm diameter Sand cast iron S&S pipe as per IS: 1729
Providing and fixing uplasticised PVC connection pipe with brass unions 15 mm nominal bore 45 cm long.
Providing and fixing PTMT grating circular type of approved quality and colour 125 mm nominal dia with 25 mm waste hole.
Providing and fixing PTMT towel rail 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing white vitreous china laboratory sink of Size 600x450x200 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.
S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways conforming to Fe-410-0 or Fe-310-0
S&F venetian blinds (vertical type) of 100mm wide straps with all fittings (to be matched with existing patters) & taking down old venetian blinds complete all as specified and as directed by Engr-in-Charge. Make : MAC/VISTA/MARC/AMAR
Hard Standing
Earth work in surface excavation in any type of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:
Demolishing cement concrete nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge.
Hardcore of gauge not exc. 63mm, deposited, spread and leveling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder:
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Providing and laying factory made 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
Providing and laying for 10 mm thick Endura Parking tiles using white cement and pigments of size 300mm x 300mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:6 including taking out old unserviceable tiles and depositing the debris in low lying areas exceeding 500mtr but not exceeding 1000mtr complete all as specified and directed by Engineer-in-Charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
SEWAGE DISPOSAL
Earth work in excavation in All kinds of soil. by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Removing excavated soil to a distance n.exceeding 50m and depositing where directed at level n.exc 1.5m above starting point complete all as specified and directed
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :150 mm diameter S.W. pipe
Providing, laying and jointing glazed stoneware pipes 150mm dia class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
P & L 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Brick work with clay fly ash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:6 (1 cement: 6 fine sand)
15 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as in coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in cover slabs including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
M&L for Conventional LLDPE septic tank for 10 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete all as specified and directed
M&L for Soakage wells of size 1.8 m dia and 3.0 m effective depth with excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM 1:4, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed by Engineer-in-charge.
INTERNAL ELECTRIC SUPLLY:-
Taking down old unserviceable point wiring (Light, Fan, bell, Socket or power) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good to the disturbed surfaces of walls, ceilings and floor match the existing shade complete all as specified and directed.
Taking down old unserviceable point wiring (Light, Fan, bell, Socket or power) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good to the disturbed surfaces of walls, ceilings and floor match the existing shade complete all as specified and directed.
One light/ fan point/exhaust point controlled by one, one way switch/bell push
All as per item No. 116 above but for 5 Amps socket on independent board
All as per item No. 116 above but for 5 Amps socket on same board
All as per item No. 116 above but wiring with 4.0 Sqmm for 15 Amps switch socket combination on independent board including providing 4.0 Sqmm PVC insulated FRLS unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly.
All as per item No. 116 above, but wiring with 4.0 Sqmm for 15 Amps socket on same board including providing 4.0 Sqmm PVC insulated multi stranded unsheathed copper earth continuity conductor and connected to common earth dolly.
Supply and Fixing Modular switch single pole, one way 6 Amps one module all as specified and directed.
Supply and Fixing Modular switch single pole, one way 16 Amps one module all as specified and directed.
Supply and Fixing Modular socket 6 Amps multipurpose 2 in 1- 2/3 pin 2 module complete all as specified and directed.
Supply and Fixing Modular socket 6/16 Amps multipurpose 2 in 1 -2/3 5 pin 2 module complete all as specified and directed.
Supply and Fixing ceiling rose three terminals Poly carbonated isolated body complete all as specified and directed. Make for item No. 119 to 123 :- Anchor/Havells/Legrand/ L&T
Supply & fix Industrial type recessed mounted energy efficient LED luminaries 36 W (2 x 2), 6500K CCT, electronic driver, with < 10% THD, lumens efficiency not less than 120lm/watt metric false ceiling type Armstrong/us gypsum complete with all accessories prewired and including connecting up with three core twister flexible copper conductor cable with suitable size complete removing unserviceable fittings all specified and directed. Make : Havells Cat Part No. PLANO2X2PLR36WLED857S or equivalent in Philips/ Wipro/Polycab/Shakti
Supply and fix Industrial type LED luminaries 1x20W, aluminium housing with polycarbonate diffuser, with , 10% THD, lumen efficiency not less that 120 lm/watt complete with all accessories prewired and including connecting up with three core twister flexible copper conductor cable with suitable size complete removing unserviceable fittings all as specified and directed. Make : Havells Cat Part No. LUMILINEPLUSBS20WLED865SPCSS or equivalent in Philips/ Wipro/Polycab/Shakti
Supply and Fix Industrial type Bldg Security LED luminaries 25 W 5700K, pressure die cast bogy, embedded lens, luminous efficiency not less than 120 lm/watt with all accessories prewired and including connection up with three core twister flexible copper conductor cable with suitable size complete removing unserviceable fittings all as specified and directed. Make : Havells Cat Part No. ENDURAPEARLS25WLED757SASYTOPCMP or equivalent in Philips/ Wipro/Polycab/Shakti
Supply and fix High bay 150W LED light fittings IP65 protected luminaries robust open type vertical Highbay luminous efficiency not less than 150 lm/w, CCT 5700K including taking down old highbay lights electronic driver including fixing to the ceiling using necessary fastener/hook for hanging the lights and connecting with three core 2.5Sqmm round copper cable from ceiling rose to the connector of the fitting all as specified and directed. Make : Havells Cat Part No. SAUCERGENXPROHBP150WLED757PWBBORL or equivalent in Philips/ Wipro/Polycab/Shakti
Supply and Fix industrial type sheet metal enclosures Single pole and neutral with a two pin and earth metal clad plug and socket complete 20 Amps, 240 volts complete with all accessories etc all as directed.
Supply and Fix MCB Distribution board, SPN 12 way sheet metal enclosure double door 415 volts, AC, factory made, fixed on wall suitable for mounting Isolators and MCBs with bus bars, neutral link and earth bar of following No. of ways including taking down unserviceable distribution board and making good to the disturbed surfaces of wall all as directed.
Supply & Fix MCB SPN 32 A, 240 Volts, 10 KA rupturing capacity, 'C' series complete as as specified
Supplying and Fixing MCB SP 6 to 32 Amps, 240 Volts 10 KA 'C' series complete all as specified and directed.
S&F MCB TPN 63 Amps 440V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.
S&F MCB TPN 40 Amps 440V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.
Supply and fixing factory made epoxy powder coated Distribution Board VTPN 8 way double door (TPN MCCB DB ) with incomer MCCB of 125Amps, 36KA, 4P, with metal door IP-43 protection, IK-09as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and 200Amps copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall complete all as specified. Note: MCBs will be measured and paid separately under respective Sch A item in the schedule.
Supply and fixing factory made epoxy powder coated Distribution Board VTPN 12 way double door (TPN MCCB DB ) with incomer MCCB of 125Amps, 36KA, 4P, with metal door IP-43 protection, IK-09as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and 200Amps copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall complete all as specified. Note: MCBs will be measured and paid separately under respective Sch A item in the schedule
Supply and fixing factory made epoxy powder coated Distribution Board VTPN 4 way double door (VTPN MCCB DB ) with incomer MCCB of 125Amps, 36KA, 4P, with metal door IP-43 protection, IK-09as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and 200Amps copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall complete all as specified. Note: MCBs will be measured and paid separately under respective Sch A item in the schedule
Material and labour for fixing industrial type sheet metal enclosures Triple pole and neutral with a five pin and earth insulated plug and socket 32 Amps 240 volts complete with all accessories etc all as directed. Make for item No. 128 to 137 : Make: Legrand/L&T/Siemens/Havells
Supply & Fix sub main wiring with 2 run of 6 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof, floors etc including one run of 6 Sqmm PVC copper conductor as earth continuity wire all as specified and directed.
Supply & Fix sub main wiring with 2 run of 4 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof, floors etc including one run of 4 Sqmm PVC copper conductor as earth continuity wire all as specified and directed.
Supply & Fix sub main wiring with 4 run of 6 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 32 mm dia including conduit accessories surface/concealed type on walls, roof, floors etc including two run of 6 Sqmm PVC copper conductor as earth continuity wire all as specified and directed.
Supply & Fix sub main wiring with 4 run of 4 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof, floors etc including two run of 4 Sqmm PVC copper conductor as earth continuity wire all as specified and directed.
M&L for Earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised iron 32 x 6 mm strip as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 40mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.
GI earth wire of 6 mm dia fixed on walls/floor as earth continuity conductor connected to DBs/ panels etc.
S&F ceiling fan of sweep 1200mm,240volts, of not less than 5 star BEE rating, BLDC dust resistant fan connecting up with three core 1.0 Sqmm cable from ceiling rose including required length of down rod as required at site all as specified. Note : Mark MES no. on fan motor Make: CG/Havells/Almonard/Orient
Lightning Protection:-
M&L for Earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised iron 32 x 6 mm strip as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 40mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
S&F test point consisting of terminal box, drilled and screwed with 22 swg GI cover including 2 Nos 12mm dia 25mm long hexagonal head screws jointing GI and aluminium strips with bolts, nuts and washers on and including jointing plate made of gun metal or phosphor bronze of size 90x32x8mm complete enclosure/terminal block assy grouted in wall at 600 mm height from the length protection level by means of two nos 40x40x5mm MS plate with 6mm dia anchored bolts embedded in wall including nuts and washers all as specified and directed and shown on drawings
Supply and lay GI tubing light grade of size 50 mm dia for protection of GI strip to be laid in trenches/walls and complete all as specified and directed.
Ref & AC:-
Supply and installed air cooled split unit inverter type Air conditioners electric driven single phase of capacity of 2.0 TR. (5 Star rating) Make:- Blue Star/ Voltas/ Carrier/Hitachi
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA Make:- V'Guard/Volina/Microtech
vvcenterprises
sanjar enterprises
Bismi Engineering
Venkat Sai Enterprises
M/s ANUSHA ENTERPRISES
SRI SAI ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .