EXTERNAL PERIODICAL SERVICES, PLASTER WORK AND CERTAIN RELATED WORKS IN SMQ AREA AND CIV MD ACCN AT AFA HYDERABAD

Amount

M&L for preparing old decorated or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.

Complete removal of the existing treatment on walls and applying three coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old decorated or unplastered surfaces on walls including cornices and applying one coat of cement based paint all as specified and directed by Engineer-in-Charge.

M&L for complete removal of the existing old surface on walls and applying two coats of cement based paint over a coat of cement based primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying two coats of cement based paint all as specified and directed by Engineer-in-Charge.

M&L preparation of Newly plastered surfaces of walls and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer all complete and as directed by Engineer-in-charge.

M&L preparation of old decorated surfaces of wall including washing, rubbing down and stopping of painted surfaces and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) of any shade all complete and as directed by Engineer-in-charge.

M&L preparation of old decorated surfaces of wall including washing, rubbing down and stopping of painted surfaces and applying one coat of Acrylic emulsion paint exterior grade (100% Acrylic)d of any shade all complete and as directed by Engineer-in-charge.

M & L for preparing old painted wood and wood based surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted wood and wood based surfaces of any description, not exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted steel and iron surfaces of any description, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparing old steel surfaces of any description, exc 10 cm width or girth and applying one coat of Aluminium paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparing old painted steel and iron surfaces of any description, not exc 10 cm width or girth applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M&L for preparing old chequred / interlocking path surfaces and applying one coat of Weather Coat Floor Protector/ apex floor guard is a pure acrylic water based emulsion for exterior or equivalent, all as specified and directed by Engineer-in-Charge.

M & L Preparation of old painted surfaces on concrete surfaces plain or moulded, of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint ) etc, complete all as specified and directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high, with thick Enamel paints, etc complete all as specified and directed by Engr -in- charge.

Cutting out V groove on cracks of walls and cleaning out, wetting, grouting with crack filler (Dr Fixit or equivalent) mixing with cement slurry, making good the surface, as per manufactures instuctions, of any description and in any position, with necessary scaffoldings, as approved by Engr in charge

Cutting down Plants / trees of girth not exc 15 cm from roof tops/sidees, external walls of building, chajja wall junctions, junctions of rain water / CI / soil waste / vent puipes including taking out roots entrered into the wall / slab surfaces, then spraying the affected area with solution of 25 ml Glyphosphate (4% content) diluted with 1 litre of water or as per manufacture's instructions and making good the surfaces using PCC (1:2:4), type BO or cement mortar 1:3, with necessary scaffolding / stagging etc, any hight from ground level, all as specified and as directed. Note: 1. Group of bushes in one place is to be treat one plant and decision of GE shall be binding in this regard. 2. Any PVC pipes, brick works damaged during the execution of work shall be replaced with new one to ensure leak/seepage free joint.

Racking out joints / pointing to on old stone masonry and raised pointing in cement mortor 1:3 complete all as specified and as directed.

Taking down plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr -in- charge.

Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

M&L for brickwork with sub class 'B' old size bricks, straight or curved on plan, exceeding 6M mean radius built in cement mortar 1:6 (for levelling) in parapets, and similar works complete all as specified and as directed.

M&L for half brickwork with sub class 'B' old size bricks, straight or curved on plan, to any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for plastering in external wall surfaces of 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.

M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces as ceilling finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats white wash etc. complete all as specified and directed by the Engineer-in-Charge.

Demolition of precast concrete articles etc complete all as specified and as directed.

M&L providing precast cement concrete jallies, 25mm thick type B0 1:2:4 (12.5mm graded aggregate) and set in CM 1:6, (measured solid), including all mouldings all as specified.

Demolition of reinforcement cement concrete (of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC TypeB1 1:2:4 (using 20 mm graded aggregate) as in Beams/bands cantilevers, bressummers, chajjas , lintels over 1.5m span all complete and as directed.

M& L for form works to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including support , overhangs etc. for rough finished surfaces complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed.

S&F mild steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia or securing with clips complete all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipecomplete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe complete all as specified and directed by Engr -in- charge.

ABABEEL CONSTRUCTION (BID ID -3035632)

NS Enterprises (BID ID -3038891)

GUTHIKONDA BROTHERS (BID ID -3037458)

Sadrush Enterprises (BID ID -3045123)

SR Construction (BID ID -3048704)