AGMC of SubStation panels Internal Electrification work Electrical and associated system including operation of DG sets Water pumps and Lifts installed at CSIR Hq Rafi Marg CSIR Science Centre Lodhi road CSIR Complex Pusa and CSIR Scientist Apartment

Schedule A-CSIR HQ AND SCIENCE CENTRE

Sub-Head- I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, waterpumps and Lifts at CSIR Hq and CSIR Vigyan Kendra, New Delhi. The scope of work including the deployment of manpower is as per annexure -I

Schedule B - CSIR complex , HRDG Guest House and IPU at NIScPAR

Sub-Head- I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including Distribution boards, LT panels, operation of various DG sets, substation, waterpumps, lifts and Comprehensive Maintenance of 300 KVAR capacitor bank at CSIR Complex and IPU at NIScPR building , satsang Vihar, New Delhi. The scope of work including the deployment of manpower is as per Annexure -I

Schedule C :- MBSA

Sub-Head- I :- Operation, Preventive and Routine Maintenance of Electrical Systems.

Operation and Maintenance (Routine/ Preventive/breakdown) of entire Electrical Installation including distribution boards, LT panels, operation of various DG sets, waterpumps, lifts and Comprehensive Maintenance of 100 KVAR capacitor bank at CSIR MBSA, New Delhi The scope of work including the deployment of manpower is as per Annexure -I

Sub-Head - II :- Replacement of Electrical Components & Accessories.

Replacement of Defective of following rating and breaking capacity and pole MCCB including supply with thermomagnetic Release and terminal spreaders in existing cubicle panel board drilling connections etc as required.

100 A, 16 KA TPMCCB

125 A, 16KA TPMCCB

200 A, 25KA TPMCCB

125 A, 36 KA FPMCCB

200 A, 36 KA 4 pole MCCB

250 A, 36 KA 4 pole MCCB

250 A, 25 KA 3 pole MCCB

400 A, 50 KA 4 pole MCCB

Replacement of defective 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker including supply suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Single Pole and Neutral

Triple Pole

Triple Pole and neutral

Replacement of defective 63 amps rating, 240/415 volt "C" series, miniature circuit breaker including supply suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing & commissioning etc. as required.

Single pole and neutral

Triple pole and neutral

Replacement of defective Fan regulator on existing switch box cover including supply and connections etc complete in all respect. Switch type fan regulator of "Anchor" / "Rider make 100 Watt 230 volts

SITC of hand dryer of 1200 Watt, 50 Hz, 230 Volts, <30 dB, stainless steel body with connections, acessories including supply etc complete as required. Make: Kopal

Replacement of defective exhaust fan of 300 mm sweep, single phase, 900/1400 RPM complete with all accessories including supply, connections etc complete in all respect.

Replacement of defective heavy duty exhaust fan of 450 mm sweep, single phase, 900/1400 RPM complete with all accessories including supply, connections etc complete in all respect.

Replacement of defective starter including supplying etc complete in all respect.

Replacement of defective capacitor 2.5 Mfd, 230 V A.C. including supply in the existing fitting / fans etc complete in all respect.

Replacement of defective Plug Top including supply, connections etc. as required.

3 pin Top 6 Amp

3 pin Top 16 Amp

Replacement of defective 6A 3 Pin Multiplug Adapter including supply, fixing etc. as required.

Replacement of defective flexible 3 core 2.5 sq.mm. copper PVC insulated unarmoured round cable 1.1 KV grade including supply,connection etc as required.

Replacement of defective 9 watt LED bulb , 230V, AC, including supply etc as req.

Replacement of defective Remote Bell including supply and connection etc as req. "Cona" Make

Replacement of defective electronic ballast Choke with connector of 36/40 W FT including supply etc complete as required.

Replacement of defective Ceiling fan with 1200 mm sweep blades, high speed including supply making connections and accessories etc. complete as required.

Replacement of defective wall mounting fan with regulator of 400 mm sweep with oscilation on wall / wood with the help of rawl plug and screws including supply and connections etc complete in all respect.

Replacement of defective Recess mounted round LED downlighter of 5W or above (for lift Car )with all required drivers, hook, chain other related accessories including SITC etc. complete in all respect.

Replacement of defective 20 Watt or above LED Batten ( Cool Day Light 6500K) 240 V, Fitting including SITC LED fitting on surface / recessed with all acessories etc complete in all respect.

Replacement of defective hylum sheet 3 mm thick including supply in the existing switch / socket MS box etc complete in all respect.

Supplying and fixing of 6 module plastic box horizontal with modular plate and cover on surface or in recess, including providing and fixing 1 number 16 amp modular switch, 2 number 16 amp modular Socket and 1 number blank plate including connections etc as required.

Replacement of 32 A, 240V (white) D.P. Main Switch Operating with Key Tag 2 Make - ROMA including supply and connection etc complete as required

Supplying and fixing 8 module plastic box horizontal with modular plate and cover on surface or in recess, including providing and fixing 1 number 6 amp modular switch, 3 number 6 amp modular Socket and 1 number blank plate including connections etc as required.

Providing and fixing following size of PVC casing and caping on surface as required.

(a) 25mm x16mm

(b) 38mm x16mm

Illumination of Building on rental Basis for foundation day / independence day / any occasion as per instruction by Engineer-in-Charge with suitable LED lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR HQ, Rafi Marg, New Delhi. (a) Providing and fixing weather proof required number of coloured 100 Watt or above LED flood lights (Qty 80 Nos or above as per requirement) in three/Tri colours i.e, orange/amber, white and green with a building length of 45 meter horizontally and 12 meter vertically. (b) Providing and fixing weather proof LED strip lighting in three colours i.e, orange/amber, white and green on terrace with a parapet length of 25 mts and in vertical lines of 15 meters drop at every interval of 0.25 m. (c) Providing and fixing weather proof LED strip lighting on terrace with a parapet length of 60 mts. (d) Illuminating the porch area of the building in vertical lines of 5.0 m drop at every interval of 0.25 mts. (e) Illuminating the Boundary wall of 60 mts length and 2 nos. gates including security room area. (f) Illumination of 25 nos. trees and plants, fountain area in lawn (g) Illumination of 13 numbers round pillars of dia 0.5 mtr, height 3.5 mtr weather proof LED strip lighting in three colours i.e, orange/amber, white and green as per the instruction of Engineer-In- charge. (CSIR-HQ)

Illumination of Building on rental Basis for foundation day / independence day / any occasion as per instruction by Engineer-in-Charge with suitable LED lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR HQ, Rafi Marg, New Delhi. (a) Providing and fixing weather proof required number of LED PAR lights (Qty 150 Nos or above as per requirement along with the sutaible size stand ) of sutable wattage 180 watt or above in three/Tri colours i.e, orange/amber, white and green with a building length of 45 meter horizontally and 12 meter vertically. (b) Providing and fixing weather proof LED strip lighting in three colours i.e, orange/amber, white and green on terrace with a parapet length of 25 mts and in vertical lines of 15 meters drop at every interval of 0.25 m. (c) Providing and fixing weather proof LED strip lighting on terrace with a parapet length of 60 mts. (d) Illuminating the porch area of the building in vertical lines of 5.0 m dropat every interval of 0.25 mts. (e) Illuminating the Boundary wall of 60 mts length and 2 nos. gates including security room area. (f) Illumination of 25 nos. trees and plants, fountain area in lawn (g) Illumination of 13 numbers round pillars of dia 0.5 mtr, height 3.5 mtr weather proof LED strip lighting in three colours i.e, orange/amber, white and green as per the instruction of Engineer-In- charge. (CSIR-HQ)

Illumination of Building on rental Basis for foundation day / independence day / any occasion as per instruction by Engineer-in-Charge with suitable LED lights for decoration of the campus for two days including man power, material, transportation etc. complete as required at CSIR Complex, Pusa, New Delhi. (a) Providing and fixing weather proof of coloured LED IMPRESSION PAR lights in 160-180 nos.of suitable wattage 180 watt or above in three/Tri colours i.e. orange/amber, white and green including required number of Rack and stand for main building with a horizontal length of 30 meter , 20 meter (annexe building), 50 meter (Guest House) and vertical length of 28 Mtr drop (MB), 10 m drop (Annexe and GH building), connection etc as required(One Job for independence day and One job for foundation day)as per the instruction of Engineer-In- charge. b) Illuminating the porch area with Providing and fixing weather proof LED strip (fixed) lighting in three colours i.e. orange/amber, white and green on connecting corridor at first floor from main building to annexe building with a parapet length of 25 meter (connecting corridor) and in vertical lines of 3 Mtr drop at every interval of 0.25 Mtr . (c ) illumination of plantations near guest house only (d) Illuminating of 2 nos. gates including security room area. (CSIR-CX)

Replacement of defective Post top LED luminaire of 35 W or above Light Fitting on the existing 50 mm dia GI poles with the help of GI reducer/GI nipple with all required drivers including supply, fixing and connection etc complete in all respect. Make:- Havells Cat No RUBYNXTPT35WLED757PSYMTOPC / Philips equivalent as per approved list of makes.

Replacement of defective 100 Watt Cool Day White Square LED Flood Light for existing GI pole / Sign Board, IP: 65/66, 230 V, 50 Hz including SITC etc complete as required.

Replacement of defective of Recess LED light fitting 6500K, 30W or above, 2'x2' luminaire having CRCA housing with all required drivers, hook, chain other related accessories including repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting including supply, testing and commissioning etc. complete in all respect.

Replacement of defective Recess mounted LED light fitting 6500K, 30W or above, 4'x1' luminaire with all required drivers hook, chain other related accessories including repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting including supply, testing and commissioning etc.complete in all respect.

Replacement of defective of Recess mounted round LED downlighter 6500K, 12W or above with all required drivers other related accessories including supply, testing and commissioning etc. complete in all respect.

Replacement of defective Surface mounted round LED downlighter in aluminum die cast body of 12 W or above 6500K , with all required drivers including SITC etc complete in all respect.

Replacement of wireless dimmable Recess mounted Direct/ Indirect LED 2'x2' luminaire in the range of 6500K, 30w or above with all required drivers, hook, chain other related accessories including supply, repair & alternation in ceiling plan for fixation of LED fittings and dismanteling of existing wall bracket / ceiling fittings / fluorescent fitting complete in all respect, with wireless controller Wipro Cat No.: LM38-461-XXX-65-XX with Dimming/ Phillips or Equivalent

Replacement of LED Street Light Luminaire of 6500K, 35 W or above & the luminaire shall be with all required drivers, hook, chain other related accessories including supply, repair & alternation in the fixation of LED fittings and dismanteling of existing fitting complete in all respect.

Supplying and fixing of LED strip in required colour including driver, adapter, connections etc complete as required.

Replacement of defective 5W or above Spike LED light made of Grey pure polyester powder coated ,Pressure die-cast spike, snoot and aluminium housing for efficient thermal management, sturdiness, & excellent corrosion resistance. IP66 & IK07 rated, CCT 3000K/Red ,Blue, Green, electronic driver including with all required drivers other related accessories including supply, testing and commissioning etc. complete as required.

Supply Installation and Comissioning of 25 W or above LED Spike Light, Pressure die-cast aluminium housing for sturdiness, excellent corrosion resistant and efficient thermal management grey finish voltage range 140-270, IP65, IK:07, System Lumen:180, CCT:3000K including connections with all required drivers other related accessories including supply, testing and commissioning etc. complete as required.

Supplying, installation, testing and commissioning of 100 Watt tricolour LED Flood Light for existing GI pole / Sign Board, IP: 65, 230 V, 50 Hz etc complete as required.

Replacement of defective following LED driver with connector of LED Light fitting including supply etc complete as required.

LED driver, V(out): 30-36 VDC, I(out): 0.900 A, P(out): 33 W for 4'x1' luminaire

LED driver, V(out): 53 VDC, I(out): 0.720 A, P(out): 40 W for 2'x2' luminaire

LED driver, V(out): 30-40 VDC, I(out): 0.900 A, P(out): 32 W for 2'x2' luminaire

LED driver, V(out): 145 VDC, I(out): 0.230 A, P(out): 36 W for 2'x2' luminaire

LED driver, V(out): 40 VDC, I(out): 0.250 A, P(out): 7 W for bollard light luminaire

LED driver, V(out): 30-38 VDC, I(out): 0.860 A, P(out): 25-35 W for Street light luminaire

LED driver, V(out): 32-54 VDC, I(out): 1.4 A, P(out): 75 W for Street light luminaire

LED driver, V(out): 107-214 VDC, I(out): 0.700 A, P(out): 150 W for Flood light luminaire

LED driver, V(out): 60-74 VDC, I(out): 0.950 A, P(out): 75 W for Flood light luminaire

LED driver alongwith bluetooth dimmer controller V(out): 24-40 VDC, I(out): 1800 mA, P(out): 44 W or above for 4'x1' luminaire

Replacement of defective LED Indicator with different colours 230 Volts, 50 Hz with connections, acessories including supply etc complete as required.

Replacement of defective 18 watt or above LED bulbs , 230V, AC, including supply etc as req.

Filtration & dehydration of Indoor Type 11/0.433 KV, 3 phase, Dyn 11 630 KVA Transformer Oil with streamlined filter machine, attending the leaking points, replacement of packing gaskets, bushings, Silica Gel, with new one, including Supply & top up with new transformer oil with low viscosity EHV grade in the main transformer tank upto the required level, disconnection & re-connection of HT & LT cables etc, Achieving minimum BDV of 60 kV complete as required. (CSIR-CX)

Supplying and fixing 3 module water proof box with enclosure on surface or in recess, including providing and fixing 1 number 20 A modular switch, 1 number 16 A modular Socket including connections etc as required.

Replacement of defective LED driver/Controller with V(in): 220-240 VAC Freqency: 50 Hz,0.6 A IP20 tc : 70 Degree celsius ta : -20.....50 Degree celsius along with connector for dimmable light fitting f Wipro make CAT no. LM38-461-xxx-65-xx including supply etc complete as required by the respective OEM/ wipro.

Supplying and drawing 3x10 sq.mm sizes of FR PVC insulated copper conductor, single core cable in the existing surface / recessed PVC / Steel conduit / PVC casing and capping as required.

Replacement of defective L&T make D-O-L starter, Relay range 11-18 ampere, three phase, 440 V, 50 Hz including SITC of starter, incoming and outgoing cable connections etc complete as required

Replacement of defective 25 litre vertical water geyser 4/5 star including supplying 25 L Vertical water geyser, 230 V, 50 Hz etc complete in all respect

Sub-Head - III Internal Electrification Work.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.

Group A

Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2x 2.5 sqmm + 1 x 2.5 sq. mm earth wire

2x 4 sqmm + 1 x 4 sq. mm earth wire

2x 6 sqmm + 1 x 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x1.5 sq. mm

3 x1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

3 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following piano type switch/socket on the existing switch box / cover including connections etc. as required.

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

2 way 5/6 amp switch

Bell push

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell Push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch, connections, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5pin 15 /16 amps modular socket outlet and 15 / 16 amps modular switch, connections, painting etc. as required.

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing metal box of following sizes (nominal size ) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required

100mm x 100mm x 60mm deep

150mm x 75mm x 60 mm deep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Replacement of defective DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB including supply complete with connections, testing and commissioning etc. as required.

Providing and fixing of 25 mm x 5 mm GI Earth strip on surface or in-recess for connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Painting of Electrical Panel / Distribution Boards including surface preparation, cleaning and applying two or more coats of synthetic enamel paint of approved brand and manufacturer of required color to give an even shade over a coat of approved steel primer(red oxide/zinc chromate) after removing rust and dust complete as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. ( Earthing for Lift Machine Room).

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

Dismantling of existing MCCB panel board on surface/recessed including disconnection of incoming and outgoing cables. Etc complete as required.

Supplying and fixing 63 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and Fixing 100 A,30 KA FPMCCB rating and breaking capacity MCCB with sheet steel enclosure ( Cubicle Panel Board), Set of copper Bus Bar 200 A, Surface/Recess and terminal Spreaders including drilling holes in cubicle panel, making connections, etc as required

Dismantling of existing 3.5C x 240 sq.mm armoured cable on the wall & open cable duct including removing clamps etc. as required .

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.

Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 120 Sq.mm

3.5 x 240 Sq.mm

Supplying of 3.5C x 240 sq mm Aluminium Conductor Armoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade conforming to IS: 7098 ( Part-1) with latest amendments etc complete as required.

Sub - Head IV :- Repairing, Servicing and Rewinding of Fans, Pumps and Motors.

Repairing and over hauling of Ceiling fans up to 56" sweep including repairing of shaft, disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing and over hauling of Exhaust Fan up to 18" sweep including repairing of shaft, disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing and overhauling of Wall Mounting Fan up to 400 mm sweep including all materials, disconnecting and reinstallation of the same complete as required.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings / bush.

Repairing, over hauling & rewinding of 1 HP Submersible (Sewage) Pump including reinstallation, lowering the same after replacement of gun metal bushes,bearing,waterseal, bearing, plate impeller,sleeves etc. complete in all respect.

Repairing and over hauling of 1 Phase ,1 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller.

Repairing and over hauling of 7.5 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller.

Repairing and over hauling of 15 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper

Replacement of Bearings

Replacement of Impeller.

Repairing of 1 HP, 1 phase, 50 Hz Submersible pump including replacement of gun metal budhes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 1 HP , 1 Phase 50 Hz Submersible motor with water proofing copper wire of apporpriate size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 1 HP ,1 phase ,50 HZ Submersible Pump-Motor in existing bore well etc. complete in all respect.

Repairing of 5 HP, 25 stage, 3 Phase Submersible Pump including replacement of gun metal bushes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 5 HP ,25 stage, 3 Phase Submersible Motor with water proofing copper wire of apporpriate size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 5 HP 25 stage ,3 phase Submersible Pump-Motor in existing bore well etc. complete in all respec.

Repairing of 7.5 HP, 3 Phase Submersible Pump including replacement of gun metal bushes, waterseal,thrust bearing plate impeller, sleeves etc. complete in all respect.

Rewinding of 7.5 HP, 3 Phase Submersible Motor with water proofing copper wire of appropriate size and complete overhauling of motor, replacement of all necessary spare required or smooth functioning of submersible motor etc complete in all respect.

Lifting and lowering of 7.5 HP, 3 phase Submersible Pump-Motor in existing bore well etc. complete in all respect.

Rewinding, repairing and over hauling of 7.5 HP Openwell Submersible Pump- Motor including lifting, lowering, replacement of water seal, rusted nut & bolts, bearing etc. after disconnecting and reinstallation of the same complete in all respect. (NOTE :- Pump installed at underground water tank)

Repairing of Heat Convectors including replacement of all necessary spares to make them operational including following spares.

Heating Element

Blower Motor

Thermostat

Repairing of Geysers of all make & capacity including replacement of necessary spares and following spares to make them operational.

Heating Element 2 KW

Thermostat

Assemebly

Repairing of food Hot Case (Bain-marie) of all make & capacity including replacement of necessary spares and following spares to make them operational.

Heating Element

Thermostat

Repairing of Fly Insects Killer instuments all make including replacement of necessary spares and following spares to make them operational.

Ultra Voilet Tube 20 W

High Voltage Transformer

Repairing and over hauling of Exhaust Fan 30" sweep, 3-phase including rewinding of motor with enamelled copper wire, replacement of bearings / bush, repairing of shaft, disconnecting and re-installation of the same complete in all respect (Hq)

Repairing and over hauling of 1 Phase, 2 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect. (Hq)

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller

Supplying and fixing of Float switch for sewage pump of KSB make 1 HP including all necessary accessories, connection, testing and commissioning etc. complete as required.

AMC for Grundfos make pressure Booster system including booster pump with motor, control panel, Pressure Gauge, Pressure Switch, Pressure Tank etc complete as required (Services from OEM / authorized service centre only)

Repairing and over hauling of 3 Phase, 2 HP Monoblock Pump Motor including replacement of water seal, rusted nut & bolts, repairing of shaft etc. after disconnecting and reinstallation of the same complete in all respect.

Rewinding of Motor with enamelled copper wire

Replacement of Bearings

Replacement of Impeller

Sub - Head V :- Buy Back Item "As is where is basis".

Salvage value of dismantled / old Wall Mounting fan 400 mm sweep "As is where is basis"

Salvage value of dismantled / old Exhaust fan upto 450 mm sweep "As is where is basis"

Salvage value of dismantled / old flouresent tube light fitting 1 or 2x 36 Watt "As is where is basis"

Salvage value of dismantled / old Ceiling Fan 1200 mm sweep "As is where is basis"

Salvage value of dismantled / old 100 Watt LED Flood Light "As is where is basis"

Salvage value of dismantled / old Recess / surface light 12 W "As is where is basis"

Salvage value of dismantled / old Hand Dryer "As is where is basis"

Salvage value of dismantled / old 25 litre geyser "As is where is basis"

Salvage value of dismantled / old 1x4 LED light fitting "As is where is basis"

Salvage value of dismantled / old 2x2 LED light fitting "As is where is basis"

Salvage value of dismantled / old 2x2 flouresent/PL tube light fitting "As is where is basis"

Salvage value of dismantled / old Pole light "As is where is basis"

Salvage value of dismantled / old 65AH, 12 V battery "As is where is basis"

Salvage value of dismantled / old Big halogen light "As is where is basis"

Salvage value of dismantled / old metal box upto 180x100x60 mm including (5/15 A) switches & sockets, MCB's etc. "As is where is basis"

Salvage value of dismantled / old DOL starter "As is where is basis"

Salvage value of dismantled / old Power Factor capacitor upto 25 KVAR "As is where is basis"

Salvage value of dismantled / old 20/25 mm MS conduit "As is where is basis"

Salvage value of dismantled / old insulated Aluminium wires "As is where is basis"

Salvage value of dismantled / old MCCB enclosure with 12 way Distribution board along with accessories "As is where is basis"

Salvage value of dismantled / old 3.5 Cx240sq.mm aluminium armoured cable "As is where is basis"