SPECIAL REPAIR TO BUILDING NO T 6 MT YARD OF HQ 2 STC AT PANAJI, GOA

Amount

Scdhedule'A' Part-I Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position Unframed work as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.confirming to Fe-410-W(Gde-E-250) quality-B

Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc.

M&L for Brickwork with sub- class 'B' bricks, straight or curved on plan exc 6 m mean radius,Old size brick built in Cement mortar 1:4 .

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc.

M&L for PCC 1:2:4 type B1 (20 mm graded aggregate) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed .

M&L for 50mm thick PCC 1:3:6 type C-1 as in plinth protection all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for each door .

S & F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete but gear operated type with bevel gear box and crank handle thichness 1.25mm in laths.

S & F for Safety lever locks mild steel with 4 levers for rolling shutters.

S & F for Ball bearing for rolling shutters.

Demolition for Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) & removing excavated material exc 1.50Km but n.exc 5 km & depositing where directed.

M&L for 100mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate).

M & L for 15mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner

M & L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement motar 1:6 finished even and smooth (without using extra cement), on internal surfaces.

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement motar 1:4 finished even and smooth (without using extra cement), on external surfaces.

M&L for Preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of oil emulsion distemper walls.

M&L for preparation of old decorated surfaces of wall, washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of Oil emulsion distemper (white/tinted) over putty filling etc complete all as specified.

M & L for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

M & L for preparation of old steel Surfaces and applying two coats of synthetic enamel paint on surfacess of any discription, over 10cm in width or girth .

M/L for preparation of new plastered surfaces of any description and applying two coats of acrylic anti fungal exterior base paint over a coat of primer on walls complete all as specified and as directed by Engr-in-Charge.

S&F 4mm thick of size 600mm x 600mm HPSC (High pressure steam cured) prelaminated self embosed, textured designer board E classic board as in ceiling tiles fixed with 4mm dia GI suspenders @ 600mm x 600mm c/c bothways including necessary galvanised iron powder coated frame work of size 28x24x0.9mm thick angle at corners.

Scdhedule'A' Part-II Taking down of existing Point wiring of any type any size including Complete fittings Such as Ceiling roses ,pendant, holders ,Batten Holders ,shades regulator etc all as directed.

Taking down UNSV Sub main wiring of any size including PVC conduit with all saddles and acessories all as directed by EIC.

Taking down carefully UNSV main switch DB including MCBSof any size make and capacity

M & L for Casing Caping point wiring with 1.5 Sqmm (nominal area) PVC insulated and PVC unsheathed FR cable stranded copper conductor using pvc conduit medium grade ISI marked with all fittings and accessories with sunk pressed steel terminal boxes 1.60 mm thick for mounting of sockedt, switches, fan regulator etc with 3mm thick plastic laminated bakelite sheet top cover Make : Hylem/Anchor for one light/fan point controlled by one switch or switch and regulator complete including PVC insulated stranded copper conductor earth wire 1.5 Swmm size connecting to common earth and earth dolly switch somplete as dreected by EIC. (Switch/socket/regulator are to be measured and paid separately). Make of PVC cable:- Havells/L&T/ Kalinga/Plaza

All as per item No. 29 above but for one 3 pin 5 Amps socket outlet on same board with other switches

All as per item No.29 above but for one 3 pin 5 Amps socket outlet on independent board

All as per item No 29 above but for one 3 pin 15 Amps socket outlet on independent board with cable 2.5 Sqmm size

S&F Switch piano, flush type, 5Amps, single pole, one way. Make: SSK Anchor/ Havell's, Kolars

S&F Switch Socket combination piano, flush type, 15 Amps, singel pole, one way. SSK/Anchor/ Havell's, Kolars

S&F Switch Socket combination piano, flush type, 5 Amps, singel pole, one way. SSK/Anchor/ Havell's, Kolars

Supply and fixing Regulator step type 300 Watt 240 Volt for Ceiling Fan all as specified and directed. Make - Plaza/SSK /Kolars

S&F Ceiling rose surface bakelite 65x50mm two to three terminal Make : SSK/Havells/Plaza.

S&F for submain wiring alongwith earth wire with 2x6.00 sqmm+1x4.0 sq mm earth wire of FR PVC insulated copper conductor, single core cable in surface/recessed in PVC conduit as required.

S&F LED wall mounted light fitting, 20 Watts, 230 Volt Energy efficient Box type epoxy power coated complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make - Havells Cat No - LUMILINEPLUSSBS20WLED865SPSS

S&F 20 W LED street light fitting, 230 Volt Energy efficient IP protection 65 complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make - Havells Cat No - ENDURAPEARLSL20WLED757SASYTOPCMP

S & fFSheet metal enclosure,( DB’S) double door made out of CRCA Sheet, 240 Volts single pole and neutral with 200 Amps rated bus bar 4 way complete all as specified and directed. Make: Standard,Havells

S & F Sheet metal enclosure,( DB’S) double door made out of CRCA Sheet, 240 Volts single pole and neutral with 200 Amps rated bus bar 8 way complete all as specified and directed. Make: Standard,Havells

S & F Isolator SPN 6 to 40 Amps, 240 Volts

S & F MCB SP 6 to 32 Amps 240 volts, 15 Hz, 10 KA suitable for lightening load of capacity 6 to 32 Amps. Make : Havells/L&T/MDS

N VENKATESWARLU

Shree Ram Enterprises

SLB Enterprises

Raja Enterprises

M/s Hari Construction

Manak landmarks

NALANDA DECOR

pk janardhanan