Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC H NO 767 NEAR OLD POST OFFICE NEW VADDEM VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.2 L+₹3.8 L (8.97%)Rejected-AOC FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹48.1 L+₹5.7 L (13.5%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹48.5 L+₹6.1 L (14.5%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GOMANTAK
GE Gomantak Vasco Da Gama Pin 403802
Repairs to Joinery Rolling shutter collapsible gates and railing including aluminium joinery of AOR under AGE BR I in GE Gomantak
2024_MES_648252_1
8620/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹80,000
Yes
20 Jul 2024
28 Mar 2024
27 Apr 2024
28 Mar 2024
26 Apr 2024
12 Apr 2024
Amount
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including making good the wall surface complete all as specified and directed.
Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed
Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed
Taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. and refixing in same opening, shutters of any description n. exc 1 sqm complete all as specified and directed.
Taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. and refixing in same opening, shutters of any description exc 1 sqm and n. exc. 2 sqm each complete all as specified and directed.
M&L for inspecting joinery and carrying out petty repairs, easing adjusting door/ window/ kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed. Note : (i) Each repair job shall be measured as one job.
S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100 mm long (ISI marked) complete all as specified and directed.
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked) complete all as specified and directed.
S&F 125 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.
S&F 200 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F second class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F pressed steel door frame of size 105 x 60mm with one or more rebates, made out of 1.6 mm thick MS sheets including necessary fixing lugs, hinges, lock strike plate, etc. and completely fillied with PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in back side fixed complete all as specified and directed.
S&F pressed steel door frame of size 125 x 60mm with one or more rebates, made out of 1.6 mm thick MS sheets including necessary fixing lugs, hinges, lock strike plate, etc. and completely fillied with PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in back side fixed complete all as specified and directed.
S&F 2nd class HW 35 mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on one sides and other side with decorative face veneer with lipping/frame work, complete all as per specified and as directed.
S&F butt hinges medium weight cold rolled mild steel 125 mm long (ISI marked) complete all as specified and directed.
S&F aluminium anodized, barrel tower bolt of extruded section, 200 mm (ISI marked) complete all as specified and directed.
S&F 150 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed.
M&L for 2nd class hard wood glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into square, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 75mm long (ISI marked) complete all as specified and directed.
S&F aluminium anodized, barrel tower bolt of extruded section, 125 mm (ISI marked) complete all as specified and directed.
S&F 150 mm long Aluminium plate type II hook & eye fixed to window shutter complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description ) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description ) from steel frames glazed with putty or fixed with beads complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality and fixing with oil putty or rubber, wooden/aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed. Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item.
S&F 4.8 mm thick sheet glass frosted and fixing with oil putty or oil putty or rubber, wooden/aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed. Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item.
Cutting holes in brick/PCC block walls built in cement mortar for inserting holdfasts or lugs to a depth exceeding half brick but not exceeding one brick from the face of jamb and making good dismantled portion in cement concrete 1:2:4, type B-1 as required all as specified and as directed.
Cutting holes in stone masonary walls built in cement mortar for inserting holdfasts or lugs to a depth exceeding half brick but not exceeding one brick from the face of jamb and making good dismantled portion in cement concrete 1:2:4, type B-1 as required all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in repair PTMT towel rail, 600 mm long, fixed to wall with PVC gully and CP brass screws (min wt 190 Gms) complete all as specified and directed.
S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys, including cutting holes in existing pressed steel frames, all as specified and directed.
S&F solar/sun control film 50 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed.
S&F in repair 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 150mm (ISI marked) complete all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 200 mm (ISI marked) complete all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 125mm (ISI marked) complete all as specified and directed.
S&F in repair 125 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.
S&F in repair 150 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed.
S&F in repair 200 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F in repair 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.
S&F in repair 150 mm long Aluminium plate type II hook & eye fixed to window shutter complete all as specified and directed.
S&F in repair 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed.
S&F in repairs for 18mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', with decorative veneer on one face fixed with screws to timber frame work complete all as specified and directed.
S&F in repairs in block board or veneered particle board for external lipping, 6mm thick fixed with nail complete all as specified and directed.
S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete as specified and directed.
S&F in repair continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete as specified and directed.
S&F Ball catches (magnetic catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50 x 15 mm and fixed complete all as specified and directed.
S&F in repair 2nd class hard wood, plain fillets, sectional area exc 6 Sqcm but not exc 13 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.
S&F in repair 2nd Class HW Boarding of size 25mm thick, planed on both sides and fixed with nails complete all as specified and directed.
S&F 100 mm long hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of anti corrosive paint over a coat of red oxide premier complete all as specified & directed.
Removing existing grills from window and refixing the same after carrying out repairs for windows to external/internal side of buidling complete all as specified and directed.
S&F in position powder coated (any colour and thickness of coating not less than 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodized aluminium fittings such as hinges type B-21 -100mm long (3 No.), suitable handle (2 No.) complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified & directed.
S&F Steel rolling shutters with 1.25 mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type complete all as specified & directed
S&F collapsable steel gate, top hung consisting for channel pickets, pivoted flats bars, top and bottom runners and wheel, handle etc as specification, erected in position and securing runners with holdfast and brackets complete all as specified in clause No. 10.24 of SSR part-I and consisting of following:- MS channel - Hot rolled medium channel 18 x 9 x 3 mm Tee and flats for top and bottom runners with a minimum web of 40 x 12 mm and flange of 40 x 6 mm Distance between centre to centre of channel pickets - 10 cm
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of Aluminium paint over a coat of red oxide premier complete all as specified & directed.
M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for repair and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioning and making good the disturbed surfaces of walls to match with existing complete all as directed. (NOTE: (i) Quoted rate is inclusive for replacement all minor spare parts as required and supply of major spare part such as MS Spring, ball bearings, laths, shaft pipe, gear set required for replacement will be measured and paid separately under relevant items.
Supply only MS spring for rolling shutter fo any size or any lenght
Supply only ball bearing of for rolling shutter
Supply only gear set for rolling shutter
Supply only rolling shutter shaft assembly including all necessary fittings
Supply only mortise lock steel 6 lever chromium plated with double handles for single shutter to match with existing one Make : Godrej , Universal
Repairs to collapsible gates removal, replacement of worn out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning complete all as specified and as directed.
Repairs to alumunium doors shutters of any size by cleaning, greasing and easing for smooth functioning including replacement of unserviceable minor fittings for the following:- Note: Spare parts if required shall be measured and paid separately under respective items.
Repairs to alumunium window/ventilator shutters of any size by cleaning, greasing and easing for smooth functioning including replacement of unserviceable minor fittings for the following:- Note: Spare parts if required shall be measured and paid separately under respective items.
Supply only rubber beading suitable alumunium /MS in Windows and Doors for fixing glass
M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions
S&F aluminum powder coated deco grill make DG-104 (10 mm thick section) incl 'C/F/L' channel alround grill complete all as specified and directed.
M&L for 12mm thick Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame or to aluminium frame work etc. complete all as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick alumunium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys complete all as specified and directed.
S&F in repairs Aluminum Die cast body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repairs Aluminum Die cast body Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
Dismantling of fencing wire of any description and any type complete all as specified and directed.
Excavation post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth on broken rubble mixed with earth arround in layers not exceeding 25 cm thick in soft/ disintegrated rocks and making good complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L mild steel framed work with angle iron, flat iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 12 mm dia of neck, length of bolts exc. 5 cm but not exc. 10 cm complete all as specified and directed.
Supply and fix PVC coated MS galvanised chain link fencing of size 75 x 75 mm of any type of standar, rail straining bolts etc including provision of binding wire all as specified and as directed.
M&L structural steel work in tubular trusses/framed work including special shaped washer etc complete using ERW or induction butt welded tubes and posts conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.
M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exc.10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed
S&F in repair pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping screws complete all as specified and directed.
S&F in repair pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.50 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) complete all as specified and directed.
Taking down existing roof treatment of any description including roof plaster and removing the debris to a distance exc. 500 m and depositing out side MD land all as directed.
M&L for roughening surfaces of old concrete floor/ roof by picking, sweeping clean and washing down with water to remove dust, etc., brushing neat cement slurry with 3 kg of cement per sq.m. and finally rendering 15 mm thick in CM (1:4) on concrete surfaces finishing even and smooth without using extra cement complete including mixing water proofing compound all as specified. [Note: Supply only water proofing compound shall be measured and paid separately]
Supply only liquid water proofing compound
Providing and applying Sika Shield W-159( Formarly Known as Sika BIT w15), of make Sika or equivalent in FOSROC/ Dr Fixit, 1.5 mm thick double sided, modified bitumen waterproofing membrane with cross laminated PE film for wet application on the RCC structure . The membrane shall be applied after making concrete wall/roof in saturated surface dry condition and applying a bonding slurry Sika Shield W-1( formarly known as Sika BIT w1) or equivalent in FOSROC/ Dr Fixit. The membrane is then unrolled and pressed into the fresh slurry after removal of the release liner. Both long and short edges of the membrane are overlapped by min. 80 mm and firmly pressed together using a roller with staggered overalps. The membrane shall have tensile strength 4 N/mm according to ASTM D412 mod; elongation 200 % according to ASTM D412 mod; resistance to tear 23 N according to ASTM D624; joint peel resistance 700 N/m according to ASTM D1876 at 23 °C; joint shear resistance 220 N according to ASTM E154 ; low temperature flexibility of -15 °C over crack tested for 100 cycles according to ASTM C836 ; resistance to lateral water migration 70 m according to ASTM D5385 mod. application with authorised applicator only all as specified and directed
M&L for filling the existing cracks on plastered surfaces of walls by using Dr. Fixit Crack-X Shrink free compound or equivalent incl preparation of surfaces before application by opening the cracks and cleaning off the dust, dirt etc. for ease of application of paste all as per manufacturer's instructions and making good surfaces all as directed.
M&L for applying Dr. Fixit Prime seal diluted with water in 2:1 ratio and allowed to dry and apply three coats of Dr.Fixit Raincoat without dilution with water including preparation and cleaning of surfaces by removing of dust, dirt etc. with specialist as per manufacturers instructionsand as directed.
S&F for 1mm thick PVC sheet, plain colour, fixed to existing doors by using rubber based adhesive including removing and refixing iron mongries complete all as specified and as directed.
S&F in repair curtain rod fancy type, made out of 25mm dia MS conduit pipe duly PVC sleeved, fancy type plastic finial, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50 mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed.
M&L for Mild Steel, plain, black sheet, 0.8mm thick, as in covering to doors/ frames, cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rives and fixed to steel members with plain 40mm lap joints or welded / riveted seams all as specified and directed.
M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.
M&L for post construction anti termite treatment to soil along with external perimeter of building at the rate 2.25 liters of emulsion per meter of the perimeter wall/cruple joint/Juction of wall of surface area incl making hole and drill all as specified and directd.
M&L post construction anti termite treatment for treating the soil under existing floors using emulsion @ 1 ltr per hole, 300mm apart including drilling and plugging 12 mm dia hole with cement mortar (1:2) to match the existing floor compete all as specified and directed.
M&L for 18 mm thick (+/- 5%), 100 5 lead free, plain PVC solid sheet of minimum density fixed as in kitchen cabinet including shutters and necessary fixing arrangement such as brackets, screws as required and all the edges shall be covered with 1 mm thick edge beading tape or 90 degree edge bent finish as per manufacturer’s instructions with fixing of necessary SS mongery complete all as specified and directed.
S&F 1 mm thick, decorative PVC laminate of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instructions complete all as specified and directed.
S&F in repair stainless steel basket of size 475 mm x 500 mm x 100 mm with external width 475 mm as in cutlery, cup and saucer basket etc. to kitchen drawer modular type made out of stainless steel 4 mm dia wire at 300 mm C/C and fixed to PVC kitchen cabinets with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per manufacturer instructions)
S&F in repair stainless steel basket of size 475 mm x 500 mm x 200 mm with external width 475 mm as in thaliplain wire basket etc. to kitchen drawer modular type made out of stainless steel 4 mm dia wire at 300 mm C/C and fixed to PVC kitchen cabinets with necessary fixing arrangement complete all as specified and directed. (Note: Work shall be carried out as per manufacturer instructions)
S&F in repair stainless steel sliding/telescopic channel of lenght 20 inch (500 mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45 mm complete all as specified and directed.
M/S jvsr constructions
SACHIN CONSTRUCTIONS
K M SUBHANAIAH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .