REPAIRS TO FLOORING, TILING, SUNKEN FLOOR TREATMENT, PLINTH PROTECTION, ATT, AC SHEET ROOF, PLUMBING WORKS, OHT AND CONNECTED B/R WORKS IN CERTAIN MD AND OTM ACCN AT AFS STN MADH ISLAND UNDER GE AF THANE

Amount

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and directed by Engr-in-charge.

M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc ,complete all as specified and directed by Engr-in-charge.

M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron ,complete all as specified and directed by Engr-in-charge.

M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors,complete all as specified and directed by Engr-in-charge.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment for voids in masonry using chemical emulsion @ one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors,complete all as specified and directed by Engr-in-charge.

M&L for Plain Cement concrete (PCC) padding in cement concrete (1:2:4), type B0 (using 12.5 mm graded stone aggregate) finished even and smooth without using extra cement ,complete all as specified and directed by Engr-in-charge.

M&L for Plain cement concrete,type B0 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges ,complete all as specified and directed by Engr-in-charge.

M&L for Plain cement concrete ,type C1 1:3:6 ( using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges ,complete all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound ,complete all as specified and directed by Engr-in-charge.(Make:- FOSROC /Dr Fixit/Pidilite Industries Ltd )

Supply only liquid water proofing compound ,complete all as specified and directed by Engr-in-charge.(Make:- FOSROC /Dr Fixit/Pidilite Industries Ltd )

M&L for brick work by using old size bricks with sub class B bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6,complete all as specified and directed by Engr-in-charge.

M & L for second class hard wood clean sawn timber fixed in scantling ,complete all as specified and directed by Engr-in-charge. (Note: The rates for timber “fixed” apply to scantlings fixed as girders, lintels, wallplates, joists (except trimmer and trimming joists, purlins, rafters and carpenter’s work generally, which is not framed by means of mortice and tenon, tusk and tenon or dove tail joints. The rate include for lapping, halving, tabling, scarfing, notching, birds mouth cutting, splayed or bevelled ends, boring for and fixing of bolts, waste, etc. and hoisting and fixing in position and also for small labours like splaying, chamfering, rounding angles and nosings not exceeding 3mm width or girth).

Ditto as per Item No 12.00 above but except timber. (Note: Old serviciable timber retrived from relevent items of BOQ shall be reused)

M & L for plain fillets, square, rectangular in section,clean sawn, secured with screws, sectional area exc 6 and n.exc 13 sqcm in 2nd class hardwood, complete all as specified and directed by Engr-In- Charge.

S&F battens for tiles of 2nd class hard wood (Sal) clean sawn batten at 30cm C/C , sectional area exc 5sqcm but n.exc 15sq.cm , complete all as specified and directed by Engr-In- Charge (Note: The rates include for all straight and/or raking cutting and waste; also for a larger section batten at eaves, if required).

Fixing only, battens of any cross sectional area for tiles, complete all as specified and directed by Engr-In- Charge. (Note: Old serviciable battens retrived from relevent items of BOQ shall be reused)

S&F Boarding in roofs, ceilings, partitions, fascia,barge, soffit, etc using 2nd class hard wood (Sal) clean sawn with butt joints 25 mm thick with nails in any situations (except flooring and skirting) , complete all as specified and directed by Engr-In- Charge.

S&F Boarding in roofs, ceilings, partitions, fascia,barge, soffit, etc using 2nd class hard wood (Sal) clean sawn with planed one side with butt joints 20mm thick with nails in any situations (except flooring and skirting) , complete all as specified and directed by Engr-in- Charge.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified and directed by Engr-in-Charge.

M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engr-in-charge.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed by Engr-in-charge.

M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof fixed with L- type or J-type or cranked hook bolt or galavanised steel hook bolt , complete all as specified and directed by Engr-in-charge.

M & L for 6mm thick asbestos cement-two-piece adjustable plain wing ridge in roof,wall fixed with L- type or J-type or cranked hook bolt or galavanised steel hook bolt , complete all as specified and directed by Engr-in-charge.(Note: Two-piece adjustable ridges shall be measured as one length)

M&L for roof tiles Manglore pattern , interlocking at side joints laid dry , complete all as specified and directed by Engr-in-charge. (Note: The rates include for a tile and half tile at verges and cutting holes through tiling for pipes, including making good to existing surface).

Ditto as per Item No 24.00 above but except tiles .(Note: Old serviciable roof tile retrived from relevent items of BOQ shall be reused).

M&L for ridges or hip tiles to suit Manglore pattern of roofing tiles, bedded & jointed in cement mortar 1:6 , complete all as specified and directed by Engr-in-charge.

Ditto as per Item No 26.00 above but except tiles.(Note: Old serviciable ridge tile retrived from relevent items of BOQ shall be reused).

M & L for 4mm thick asbestos cement plain building boards, fixed to timber frame work with screws in ceiling,flat or sloping surface ,complete all as specified and directed by Engr-in-charge..

M&L Granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

ditto as item No 8 but as in verticle surface including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs of steps, cooking platforms and other similar situations,complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base ,complete all as specified and directed by Engr-in-Charge.

S&F 38mm wide glass dividing strips, 3 mm thick inserted in position, conform to design ,complete all as specified and directed by Engr-in-Charge.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises ,complete all as specified and directed by Engr-in-charge.

M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 over RCC slab horizontal or vertical portion for laying water profing treatment ,complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site ,complete all as specified and directed by Engr-in-Charge.

M & L for preparing new wooden surface, of any description n.exc 10 cm width or girth and apply two coats synthetic enamel paint over one coat of pink primer ,complete all as specified and directed by Engr-in-Charge.

M & L for preparing new wooden surface, of any description n.exc 10 cm width or girth and apply two coats synthetic enamel paint over one coat of pink primer ,complete all as specified and directed by Engr-in-Charge.

M & L for preparing new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with creosote ,complete all as specified and directed by Engr-in-Charge.

M & L for Preparing surfaces of wood and wood based materials, new or old of any description Tiles or slate battens ,any size and spacing prepared and treated all over with (mesured overall on one side only,spaces not deducted ) with Creosote oil ,complete all as specified and directed by Engr-in-Charge.

M&L for 15mm bore medium grade G.I tubing with all fittings & fixed complete to walls & ceilings or laid in floors, complete all as specified and directed by Engr-in-charge.

Ditto as per Item No 42.00 above but for 20mm bore.

Taking up or down steel water tubing and connections including fitting/fixtures etc for 15 mm bore , complete all as specified and directed by Engr-in-charge.

Ditto as per Item No 42.00 above but for 20mm bore.

Disconnecting existing tanks exc 250 & n.exc 500ltrs tank , setting aside ( or lowering if required) for repairs , cleaning etc and hoisting if required reconnecting and refixing in position.

S&F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore.

Suppying and fixing in repairs gun metal, globe or gate valve 20mm bore, with iron wheel head, screwed both ends for iron pipe complete all as spd.

S&F in repairs ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore.

Ditto as per above item 48 above but for 15 mm bore.

S&F in repairs ball brass valve 20mm bore,high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule complete all as spd.

S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms)

S&F in repairs gratings square 150 mm size of PTMT (min wt 100 gm)

S&F PVC connection with brass socket on both side 60cm for 15mm dia pipe.

S & F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to walls

Forming 12mm thick Expansion joints filled with pre formed bituminous filler and 30mm primed and sealed with sealing compound grade 'A' concrete thick 100mm.

Forming construction joints 30mm deep X 10mm wide filled with sealing compound grade A

Demolition of brickwork built in cement mortar including all pillars, etc and removing of the debris as directed by Engr-In-Charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition or unrienforced cement concrete of any description and in any position not otherwise specifically provided for , and removing rubbish outside MOD.

Dismantling timber scantling 40 sqcm and over in section, in any position.

Dismantling of fillets, rails, posts, rafter, purlins, etc under 40 sqcm in section.

Dismantling AC plain board any description fixed in any position.

Dismantling battens for tiles, shingles etc of any size including fillets spaced exc 15cm.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling AC Sheet (corrugated, semi-corrugated, etc) in roof covering.

Dismantling single layer Manglore pattern or similar tiles in roofing

Taking down soil pipe any size or pattern including all fitting,shoes, bends etc all as specified.

S&F S&F rolled tubular sections with ERW or induction butt weld MS tube black conforming to IS 1161-1979 grade St 240 as in main and cross beams, hip and jack rafters, purlins where connected to commo rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land including preparation of primier on surface by forced application complete all as specified

M & L Non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed 15mm thick in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete

ditto as item No 72 but as in verticle surface including 10mm thick backing coat in CM 1:4.

M&L 75mm thick PCC 1:2:4 type B2 (using 40mm graded aggregate) as in floors and finishing the surface even and smooth without using extra cement in Plinth protection.

M&L 100mm thick PCC 1:2:4 type B2 (using 40mm graded aggregate) as in floors and finishing the surface even and smooth without using extra cement.

M&L 40mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) as in floors and finishing the surface even and smooth without using extra cement.

M&L for roughening surfaces of old concrete floor by picking, sweeping clan and washing down with water to remove dust & brushing neat cement slurry with 3Kgs of cement per sqm etc all as specified & directed

M&L Coloured Glazed Ceramic tiles 200x300 or 250 x 350 or 350 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge..

M&L non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

ditto as item No 78 above but coloured joint free ceramic tiles matt finish, area of each tile exc 0.11sqm but n.exc 0.18 sqm.

M&L Vitrified tiles 600x600x10mm thick polished, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge..

M&L for 60mm thick machine pressed precast cement concrete interlocking paver block, confirming to IS 15658-2006 with M-35 grade concrete with grey cement and pigment glossy finish of any size and shape etc, laid over and including 20mm thick sand cussioning etc complete all as specified and directed by Engr-In-Charge.

M&L for Chequered cement concrete tiles 20cmx20cmx25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as directed including 15mm thick screed bed in CM 1:6.

M&L for cement plaster in CM 1:4, 20mm thick in two coats (15+5) with using integral waterproofing compound finished even & smooth without using extra cement ( Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.).

M&Lfor rendering 15mm thick in cm 1:6 finished with neeru finish as specified on fair faces of brick work or concrete surfaces, complete all as specified and directed by Engr-In-Charge

M&L for cement plaster in CM 1:3, 5mm thick as in ceiling and finished even & smooth using thin coat of sagol ,complete all as specified and directed by Engr-in-Charge.

M&L for cement plaster in CM 1:6, 10mm thick as in walls and finished even & smooth using thin coat of sagol ,complete all as specified and directed by Engr-in-Charge.

M&L preparing newly plastered surfaces ,and applying 2 coats of Oil Bound Distemper over a coat of alkali resistent primer on walls ,complete all as specified and directed by Engr-in-Charge.

ditto as item No 88 above but on old surface including scraping out old surface including complete removal of existing treatment including filling of undulations if any with Birla wall care putty ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying 3 coats of white wash ,complete all as specified and directed by Engr-in-Charge.

ditto as per item No 90 above but as in ceiling

S&F in repairs GI tubing medium grade including all fittings fixed in floor /walls/ ceilling etc 20mm dia bore ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs GI tubing medium grade including all fittings fixed in floor /walls / ceilling etc,15mm dia bore ,complete all as specified and directed by Engr-in-Charge.

S&F in repais rotational moulded polyethylene water storage tanks triple layered of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and directed by Engr-in-Charge.

ditto as per item No 93 above but for 1000lts capacity

S&F in repair bib tap fancy type cast copper alloy chromium plated with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified.

S & F PVC (SWR) door bends for 110mm dia ,complete all as specified and directed by Engr-in-Charge.

S&F wash down water closet (pedestal pattern/white fixed in repairs Excluding flushing cistern & flushing pipe) complete with & including connecting to drain pipe etc ,complete all as specified and as directed by Engineer-in-Charge.

S&F ,in repairs , vitreous china squatting pan orissa pattern, size 580x440 mm white with integral foot rest (excluding flushing cistern and flush pipe including provn of lime concrete bedding ,trap etc ,complete all as specified and as directed by Engineer-in-Charge.

S&F, in reapir ,PVC, low level flushing cistern of 10 ltrs capacity with complete fitting incl float valve flush pipe bracket for flush etc ,complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china wash hand basin white flat back size 550x400 excluding taps waste chain and plug and percelain stopper but including brackets waste fitting brass CP 32 mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed and pillar taps 15 mm dia cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks screwed etc ,complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs sinks with draining board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm ,complete all as specified and as directed by Engineer-in-Charge.

M & L for application of 100mm x 1.5mm self addasive bituminous plastering tape for creack repair/ water proofing, leaking, fill cracks, joints for various surfaces. Note :- It is clearly brought out that application of tape will be done at point of leakage at staggered locations such as roof, tank etc ,complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs aluminium powder coated decorative draphery rod 20 to 25mm dia ,complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs aluminium powder coated brackets suitable for decarative draphery rods 20 to 25mm dia ,complete all as specified and as directed by Engineer-in-Charge.

Removing existing water proofing treatment what so ever exist (except concret padding), and removing debris/rubbish materials off the site,complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of acrylic water/weather proof exterior emulsion coating over one coat of primer all as per manufactures instructions including preparation of new surfaces of wall ,complete all as specified and as directed by Engineer-in-Charge.

Preparation of new iron and steel surfaces of any description over 10cms width or girth and applying two coats of epoxy base paint over a coat of epoxy base red oxide primer ,complete all as specified and as directed by Engineer-in-Charge.

S&F, in repairs, Stainless steel plate rack of standard size and weight shall not be less than of 7kg ,complete all as specified and as directed by Engineer-in-Charge.

S & F ,in repairs, health faucet PTMT including long pvc connection all as specified and directed suitable for 15mm bore pipes and fittings ,complete all as specified and as directed by Engineer-in-Charge.

S & F, in repairs, two way angle cock PTMT suitable for 15mm bore pipes and fittings ,complete all as specified and as directed by Engineer-in-Charge.

S & F in ,repairs, mirror with PVC frame of size 600mm x 450mm with glass thickness 4mm ,complete all as specified and as directed by Engineer-in-Charge.

M/s. JAY JYOTIRLING CONSTRUCTION CO

M/S VISHRANTA CONSTRUCTION