NIT 11 (25-26)HP-II/ Item-10

Wiring for LightPoint/fan point/exhaust fan point/callbell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C ( As per DJB SOR (E&M) 2025, 31.10.3)

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. (As per DJB SOR (E&M) 2025, 31.14) 2X1.5sq.mm+1 X1.5sq.mm earthwire ( As per DJB SOR (E&M) 2025, 31.14.1)

2X2.5sq.mm+1 X2.5sq.mm earthwire ( As per DJB SOR (E&M) 2025, 31.14.2)

2 X 4 sq. mm + 1 X 4 sq. mm earthwire ( As per DJB SOR (E&M) 2025, 31.14.3)

2 X 6 sq. mm + 1 X 6 sq. mm earthwire ( As per DJB SOR (E&M) 2025, 31.14.4)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (As per DJB SOR (E&M) 2025, 31.24), 5/6 A switch ( As per DJB SOR (E&M) 2025,31.24.1)

15/16 A switch ( As per DJB SOR (E&M) 2025,31.24.3)

3 pin 5/6 A socket outlet ( As per DJB SOR (E&M) 2025,31.24.4)

6 pin 15/16 A socket outlet ( As per DJB SOR (E&M) 2025,31.24.5)

Supplying and fixing of 8way(4+24), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. Asrequired.(But without)MCB/RCCB/Isolator). (As per DJB SOR (E&M) 2025 32.4.3)

Providing and fixing of 63A TP&N capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.(As per DJB SOR (E&M) 2025, 32.1.2)

Providing and fixing of 100 A, 16KA, TPMCCB rating and breaking capacity and pole MCCB with thermomagnetic release and terminal providing and fixing following rating and breaking capacity and spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (As per DJB SOR (E&M) 2025 32.2.1)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (As per DJB SOR (E&M) 2025 32.10.1)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of double poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (As per DJB SOR (E&M) 2025 32.10.3)

Supply of Ceiling fans (1200mm sweep) 230volt 50hz upto 80watt power ratting as required at site.Make: Bajaj, Havells, Crompton any other make approved by DJB SOR (E&M) 2025 20.1.2

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up-to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. (As per DJB SOR (E&M) 2025 31.45)

Supply and fixing extra conduit own rod of 20cm length GI pipe 15 mm dia. heavy gauge including painting etc. as required. (Note: More than 5cm lengths hall be rounded to the nearest 10 cm and 5 cm Or less shall be ignored) (As per DJB SOR (E&M) 2025 31.48)

Supply of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. (As per DJB SOR (E&M) 2025, 19.10.6)

Installation, testing and commissioning of pre wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable and earthing etc. as required. (As per DJB SOR (E&M) 2025, 31.41)

Supply of 50 sq.mm 4 core aluminium conductor armoured cable as required at site

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 35 sq. mm and up-to 95 sq. mm (clamped with 25x3mm MS flat clamp) of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required( As per DJB SOR (E&M) 2025, 37.1.2)