COMPREHENSIVE MAINTENANCE OF DG SETS OF DIFFERENT CAPACITY INSTALLED AT VARIOUS LOCATIONS INCLUDING OUTSOURCING SERVICES FOR MANNING AND OPERATION OF DG SETS AT AFS GWALIOR

Amount

Outsourcing of services for Operation of DG set installations round the clock everyday from Monday to Sunday, using one operator (SKILLED) in each shift (i.e. 03Shifts in 24 Hours, each shift of 8 hours) with the operation of following plants/Equipments etc at Base Ops under Air Force Station Gwalior:- (A) DG Set Installation (i) 250 KVA DG Set including AMF Panel - 01 Set (ii) Main LT Panel Board – 01 No

Outsourcing of services for Operation of DG set installations round the clock everyday from Monday to Sunday, using one operator (SKILLED) in each shift (i.e. 03Shifts in 24 Hours, each shift of 8 hours) with the operation of following plants/Equipments etc at 1 & 7 Sqn and at Substation No.1 under Air Force Station Gwalior:- (A) DG Set Installation (i) 200 KVA DG Set including LT Panel - 02 Sets (ii) Main LT Panel Board – 02 Nos

Outsourcing of services for Operation of electrical installations round the clock everyday from Monday to Sunday, using one operator (SKILLED) in each shift (i.e. 03Shifts in 24 Hours, each shift of 8 hours) with the operation of following plants/Equipments etc at Receiving station ‘A’ under Air Force Station Gwalior:- (A) Electrical Installations (i) HT Panel with HT VCB - 06 Nos (ii) Transformer 400 KVA – 01 No (iii) Transformer 500 KVA – 01 No (iv) LT Panels – 02 Nos

Note For Item No. 01 To 03 (i) Payments shall be made as per minimum labour wages latest fixed by State Govt/Central Govt whichever is higher. (ii) The quoted rate of bidder shall not be less than minimum fair wages fixed by State Govt/Central Govt (whichever is higher) including GST, LWC, EPF, ESIC etc as applicable, if quoted rate of bidder is lesser than a complete detailed justification for the same shall be uploaded in cover-I. (iii) Empty containers shall be returned by the contractor to the MES store under GE AF TA Gwalior. (iv) It will be the contractor’s responsibility to operate the DG sets, panels and distribution system to maintain the smooth function of installation round the clock. (v) It will be the contractor’s responsibility to operate the pumps, panels and distribution system to maintain the user’s requirement round the clock. (vi) All operator shall be ITI holder or minimum 3 years of work experience. (vii) All operator will wear proper uniform as approved by GE. (viii) For panel recovery on account of non-operation of installation/absent of operators from duty, the recovery amount shall be calculated @ double of rate of minimum fair wages of operator and shall be recovered from the due payments. (ix) Cleaning of workplace instrument/machinery/rest room shall be responsibility of contractor. (x) All tradesmen shall be individually life insured. The insurance certificate shall be kept on record. Qualification/Experience certificate of the employed tradesmen shall be kept on record. (xi) Stationery for operation of installation shall be contractors responsibility (Daily Log Sheet, Attendance register, Wages Register, Routine maintenance Register)

(xii) Log sheets of Singpur range shall be submitted weekly by contractor. (xiii) Operator shall carry out routine check up likely battery & raditor water lavel and will maintain it, if any abnormal noise/fault seems in DG set, operator will immediately inform to concern JE E/M or Engineer-in- Charge.(A record in this regard shall be responsibility of the contractor ). (xiii) The same operator will oprate the pump/panel & distribution system to maintain the user's requirement round the clock. (xiv) Contractor submit the nominal roll of persons to be employed alongwith qualification/experience certificates, Police verification identification certificate to Engineer-in-Charge before deployment of the staff. (xv) Contractor will submit nominal roll within 10 days of acceptance of contract and qualification and experience certificate of tradesmen to Engr-in-charge for approval of GE before commencement of the work. (xvi) Every tradesmen should have his own valid identity card for being Indian citizen. (xvii) All provisions contained in various Labour Laws/Acts and IAFW 2249 as amended from time to time are meticulously followed

Comprehensive Annual Maintenance and break down attendance of DG sets for eleven months as mentioned here in after including periodical services, B-Check falls during currency of contract and preventive maintenance checks as directed by the Engr-in-charge installed at Base ops, 01 & 07 Sqn, Sub Station No 01, P-77, Immol server complete with replacement of defective parts during breakdowns, consumables and necessary tools & plants as required etc. DG Sets :- (a) DG Set 250 KVA , 3 Phase , with AMF Panel - 01 No. (b) DG Set 200 KVA, 3 Phase, with AMF Panel - 02 No. (c) DG Set 380 KVA, 3 Phase, with AMF Panel - 01 No (d) DG Set 62.5 KVA, 3 Phase, with AMF Panel - 01 No

(A) NOTE for DG Set under Item No.6:- 1. The scope of AMC service includes maintenance, serviceability and supply of healthy DG power supply till the point of AMF Panel output switch gear. Beyond the point shall be maintained by MES. The AMC includes 4 No preventive Maintenance schedules and unlimited breakdown calls. The contractor has to replace all the spares including Lubricating oil complete all as specified by OEM. 2. The contractor shall be responsible for critical spares on shelf recommended by OEM or any other agency as approved by GE for uninterrupted serviceability of DG sets. The preventive maintenance Schedule shall include replacement of Engine oil, Fuel Filters, O rings, coolant etc. 3. The Contractor will ensure Quarterly inspection by qualified technician approved by GE and ensure servicing of DG sets as recommended by OEM and report to this effect shall be produced to GE/AGE E/M soon after every inspection. 4. Minor repairs/maintenance or breakdown attendance can be carried out either by OEM or by deploying any skilled technician. However the spares replaced and workman ship must be acceptable to Engr-in-charge during the periodical inspections. 5. All electrical and mechanical spares (Controller card, Display, AMF Panel Spares) including Major and Minor repairs at Engine side and Alternator side is covered in the Comprehensive Maintenance. 6. Replacement of reputed make of Batteries as required at site included in the Comprehensive Maintenance. 7. Maintenance and de-scaling of Radiator, fan belts and painting of DG set with synthetic enamel paint of approved color and writing MES and SM numbers during the currency of the contract is included in the scope of work 8. POL shall be issued from E/M Tech Area Stores under Sch B free for filling only in the DG sets as nad when required. The required transportation is included in the quoted rate. 9. It is the responsibility of the Contractor to ensure smooth and uninterrupted services of DG set round the clock till the user end.

(B) NOTE:- 1.The payment for Comprehensive Maintenance Item will be paid on Pro-rata basis to the Contractor. 2. Bidder should have experience in terms of Manning/Operation and Maintenance collectively of plant and machinery simultaneously for the same installation set up to be evaluated before financial bidding.

BABA DEVELOPERS

M/s Sagar Construction

Arkay Instrumentation

lodhi builders

M/S MAKHIJA TRADERS

M/s Manish Contractor

M/S J J ENTERPRISES