WELCOME MAINTENANCE TO OFFICER S MD ACCN AND REPAIRS TO PLUMBING, TOILETS / SUNKEN FLOORS ETC AT MIRAN SAHIB UNDER GE JAMMU

Amount

B/R Portion: - Material and labour for preparation of old surfaces and applying one coat of white wash on walls complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying two coat of white wash on walls complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of cement based paint complete all as specified and directed.

Material and labour for preparation of old surfaces and applying two coats of cement base paint complete all as specified and directed.

Material and labour for complete removal of existing/old surfaces of ceiling and applying two coat of oil bound distemper over and including a coat of primer complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over wood surface of any description over 10 cm width or girth complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Material and labour for complete removing of existing treatment on old surfaces of wall including cornices (plastered or unplastered) and applying 1 mm wall putty and applying two coat of Oil bound distemper any color over wall putty over one coat of primer complete all as specified and as directed.

Material and labour for prepration of old surfaces of wall including cornices (plastered or unplastered) and applying two coats of Oil bound distemper any color complete all as specified and as directed.

Material and labour for prepration of old surfaces of wall including cornices (plastered or unplastered) and applying one coat of Oil bound distemper any color complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying two coat of exterior emulsion paint any colour up to 12 mtr height complete all as specified and directed colored approved by Engineer-in-Charge.

Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed including taking down old plaster.

Material and labour for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately) of brick work or concrete surfaces in CM (1:4) finished fair and even without using extra cement over a height of 12 mtr and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coats of cement base paint over and including one coat of primer complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for rendering 10 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement and incl taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for preparing new plastered surfaces and applying two coat of oil bound distemper over and including one coat of 1 mm wall care putty on a coat of primer complete all as specified and as directed.

Material and labour for rendering 5 mm thick on ceiling or concrete surfaces in CM 1:3 finished even and smooth without using extra cement including and incl taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and three coats of white wash complete all as specified and as directed.

Supply and fixing in repair 25mm dia fancy type drapery curtain rod made of mild steel duly PVC sleeved with an including curtain rings and side brackets complete all as specified and directed.

Supply and fixing in repair fancy type drapery curtain rod of stainless 20mm dia and side capes fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed by Engineer-in-Charge

Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and labour 10mm thick cement plaster in CM 1:4 over concrete surface finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. Note :- Water proofing compound shall be measured and paid seprately under respective item.

Supply and applying two coat of un diluted thick coat of acrylic reinforcement liquid applied elastometric water proofing membrane with UV resistant properties and solar reflective properties over one coat of primer ( 3:1 water dilution) before applying second coat insert smart care roof tape corner/joints and allow it to dry then apply furthar coat complete all as specified and directed. (Note: - Every coat time gap should be minimum 6 hrs).

Supply only liquid water proofing compound complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-I (using 12.5mm graded crushed stone aggregate) as roof kerbs and coping rounded or chamfered on edges complete all as specified and as directed.

Material and labour for providing and fixing in position suspended false ceiling system using 'E' Grid suspended ceiling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips incl Dismentling wall and ceiling boards (fibre pulp/insulation ) any thickness including cover fillets including taking down All electric fittings fixed with ceiling and refixig the same in position after repalcing the ceiling) complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.50 sqm but not exceeding 4 sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.50 sqm each and removing from site complete all as specified and as directed.

Taking down shutters from the frame of any description exceeding 1 sqm but not exceeding 2 sqm each leaf and removing from site complete all as specified and as directed.

Supply and fixing pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed complete all as specified and as directed.

Supply and fixing pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed complete all as specified and as directed.

Material and labour cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in pressed steel chowkats bed block for holdfast and the like complete all as specified and as directed.

Supply and fixing 35mm thick 2nd class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.24(a), open rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50 mmX47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube suppling fixing in opening as per specification and drawing as in door/ kitchen cabinate frame complete all as specified and as directed.

Supply and fixing Factory made solid panel PVC door shutter30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame atsite as per specification & drawing as in kitchen cabinate/toilet shutter complete all as specified and as directed.

Supply and fixing in repairs Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Supply and fixing 300 mm long aluminium anodised sliding dor bolt with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 150 mm size, and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 200 mm size, and fixed complete all as specified and as directed.

Supply and fixing 150 mm aluminium handle cast type complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fixing mild steel butt hinges 100 mm medium weight cold rolled complete all as specified and as directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed/welded to door frame complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparing primer painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares n exe 0.5 sqm each pane complete all as specified and as directed.

Description all as per Ser item No. 48 here-in-before but figured glass, Pin head type complete all as specified and as directed.

Supply and fixing in repairs 18mm thick Factory made solid panel PVC board with 2mm thick 3D wood grain moulded PVC sheet on the front face & 2mm prelaminated PVC Sheet on back face with PVC tape for lipping in Kitchen cupboard complete all as specified and as directed.

Supply and fixing modular auto concealed soft closed hinges 35mm, 110 degree size fixed to cupboard complete all as specified and as directed. Make: - Hettich / Kaff / Sleek

Supply and fixing stainless steel handle 200mm fixed to cupboard complete all as specified and as directed. Make: - Hettich / Kaff / Sleek

Supply and fixing in repairs 18/19 mm Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-workscrews to timber frame work witrh 0.85 mm sunmica laminate complete all as specified and directed.

Supply and fixing 30mm width of flaps (when open) continuous (Piano) hinges mild steel bright finish or electrogalvanised complete all as specified and directed.

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer-in-Charge.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6) complete all as specified and directed.

Material and labour for vitrified tiles any colour 10 mm thick (square/rectangular) polished as in floor , area of each tile n. exc 0.36 sqm etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engineer-in-Charge complete all as specified and directed.

Description all as per item No 58.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering /backing coat of cement in CM 1:4 complete all as specified and directed.

Material and labour for any coloured non skid jointless ceramic tiles 6 to7 mm thick, area of each tile exc 0.11sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engineer-in-Charge.

Description all as per Ser item no 60.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering /backing coat of cement in CM (1:4) complete all as specified and directed.

Material and labour for Non skid tiles coloured exc 0.06 sqm and n.exc 0.11 sqm , 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engineer-in-Charge complete all as specified and directed.

Material and labour for (Ist quality) coloured digital glossy wall tiles of size 300 x 600 x 7 mm thick as on vertical surfaces such as skirting/dado etc including 15mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles glossy finish of size 450x300x 5-6mm thick in dado’s/skirting etc (1st quality). set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engr in Charge including 10 mm thick cement motar CM 1:4 complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

Demoilition of lean/cinder concrete filled in sunken slab , wire brusing the surface ,cleaning all loose dirt by dusting/watering sunken portion of WC, Toilet etc and applying cement slurry @1.5 kg per Sqm complete all as specified and directed.

Material and labour for providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface.

Material and labour for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl taking down old complete all as specified and directed.

Supply and fixing in repair CP brass bib taps with wall flange 15mm fancy type Chromium Plated cast copper alloy with quarter turn handle and wall flange complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35037PM HINDWARE (CORA) CAT PART No. F440003 PARRYWARE (ZEN X) CAT PART No. G4104A1

Supply and fixing in repair for 15mm bore CP central hole single lever basin mixer for WHB mixer without popup waste system with 450mm long braided hoses complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35011 BPM HINDWARE (CORA) CAT PART No. F440009 PLUMBER (ZEUS) CAT PART No. ZE-3104

Supply and fixing in repair Single lever Wall mixer 3 in 1 system with provision of over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without over head shower) including all fittings and fixed complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35117PM HINDWARE (ELEMENT) CAT PART No. F360019 PLUMBER (ZEUS) CAT PART No. ZE-3101-LB

Supply and fixing in repair CP brass stop/angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and directed. Make:- JAQUAR (KUBIX PRIME) CAT PART No. KUP-35053PM HINDWARE (CORA) CAT PART No. F440005 PARRYWARE (ZEN X) CAT PART No. G4107A1

Supply and fixing in repair Overhead shower 200 x 200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and directed. Make:- JAQUAR CAT PART No. OHS-35497 HINDWARE CAT PART No. F160103 PARRYWARE CAT PART No. T9979A1

Supply and fixing in repair fancy type brass chromium plated towel ring round with round flange including necessary fittings complete all as specified and directed. Make:- JAQUAR CAT PART No. AQN-7721 HINDWARE CAT PART No. F880007 PARRYWARE CAT PART No. T6002A1

Supply and fixing in repair fancy type brass chromium plated towel rack 600mm long with lower hangers complete all as specified and directed. Make:- JAQUAR CAT PART No. AQN 7781 HINDWARE CAT PART No. F890012 PARRYWARE CAT PART No. T6008A1

Supply and fixing in repair Vitreous china Water closet pedestal pattern cascade type with in built flushing cistern and seat cover with complete fitting complete all as specified complete all as specified and directed. Make : JAQUAR (LYRIC) CAT PART No. LYS-WHT-38851S (S-300) HINDWARE (SPLENDOR) STARWHITE CAT PART No. 92519 S-30 PARRYWARE (OMEGA) C-8906 (S-300)

Supply and fixing in repair Vitreous china under counter type wash basin oval size 555 x 425 x 195mm including all fittings complete all as specified and directed. Make:- JAQUAR (FLORENTINE) CAT PART No. FLS-WHT-5701 HINDWARE (ZEN) CAT Part No. 10049 PARRYWARE (CASCADE NXT) CAT PART No. C0407

Supply and fixing in repairs bib taps long body suitable for 15mm bore pipe long neck fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule complete fixed in repair complete all as specified and directed.

Supply and fixing in repair for 15mm bore CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- JAQUAR (FLORENTINE) CAT PART No. 5309/Hindware/Parryware

Supply and fixing in repair for 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repairs brass chromium plated Wall Mixer withL bend provision over head shower Arrangement with ConnectingLegs, Wall Flanges and Wall Bracket for Hand Shower fixing with GI pipes 15mm dia complete all as specified and as directed.

Supply and fixing in repairs Chromium plated Jet spray suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified and directed.

Supply and fixing in repairs cast copper CP concealed stop cock screwed down high pressure capstan head with CP flange suitable for 15mm bore pipe marked with hot or cold in the head complete including dismantling of tiles/any surface finishes and making good complete all as specified and directed.

Supply and fixing in repair cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head complete all as specified and directed.

Supply and fixing in repairs 15mm bore Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

Supply and fixing in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

Supply and fixing in repair kitchen sink with drainage board made out of 1mm thick stainless steel sheet with plug washer, waste coupling, waste pipe including bedding in cement mortar, connection to union and drain pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position and incl dismantling of water tane complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position and incl dismantling of water tane complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china squatting pan Orrissa pattern size 580x440 mm white with integral foot rest and P or S trap and connection to flushing pipe anti-syphonage pipe etc complete all as specified and directed.

Supply and fixing in repair vitreous china Water closet pedestal pattern with seat cover white including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed.

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 - 10 liters capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stain less steel with long bend of 32mm dia complete all as specified and directed. Make : Parry ware(Slimline)/Hidustan Sanitaryware/Prayag Cat Part No 501)

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 600mm complete all as specified and directed.

Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified and directed.

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and directed.

Supply and fixing in repair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden/Plastic cleats (Minimum weight 190 Gm) complete all as specified and directed.

Supply and fixing in repair 150mmm Toliet paper Holder with flip complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Chromium plated 125mm soap dish in postion complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Cabinet mirror plastic body for toilet of size 450x600mm with 4mm thick looking mirror complete all as specified and directed.

Taking up or down GI tubing 15mm bore including removal to store complete all as specified and directed.

Taking up or down GI tubing 20mm bore including removal to store complete all as specified and directed.

Supply and fixing 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supply and fixing 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Supply and fixing in repair 100 mm dia chromium plated steel grating with or without waste hole complete all as specified and directed.

Supply and fixing in repair 125 mm chromium plated stainless steel grating with or without waste hole complete all as specified and directed.

Supply and fixing in repairs box type steel windows/Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler /AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as specified and directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii)10 mm Square Bar grill/guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint.

Supply and fixing rolled formed GI box type powder coated steel windows/Ventilator (factory made) outer frame made out tube section 98x50 mm and shutter of tube section 46x46mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges aluminium handle 100 mm long aluminiuml tower bolt 02 nos on each shutter, peg stay and its locking arrangement suitable for fixing cooler /AC window complete all as specified and directed. Note: - The quoted rates shall also include: - (i) EPDM Gasket. (ii)10 mm Square Bar grill/guard bar.

Supply and fixing Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing in repair stainless steel kitchen plate rack made out of not less than 1mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.

Supply and fixing in repair CP health faucet with 1 mtr long CP flexible pipe complete all as specified and directed.

Supply and fixing in repair shelf of PTMT with and including chromium plated brass screw and wooden cleats (Minimunm weight 300 Gm) complete all as specified and directed.

Supply and fixing in repair Glass corner self, fancy type, 250x250 and 10mm thick fixed with brass bracket and screwed complete all as specified and directed.

Supply and fixing in repairs two way cock/ two way angle cock with wall flange matt chrome finish complete all as specified and directed.

Supply and fixing in repair Brass spindle for Bib cock/stop cock medium complete all as specified and directed.

Supply and fixing in repair Brass spindle for concealed stop cock complete all as specified and directed.

Supply and fixing in repair Brass spindle for fancy type Bib cock/stop cock complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Supply and fixing 75 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and directed.

Supply and fixing 110 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and directed.

Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and directed.

Supply and fixing 110 mm PVC (SWR) Junction single (T) equal / Unequal complete all as specified and directed.

Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and directed.

Demolition of brickwork/stone masonary built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles complete all as specified and directed.

Material and labour Brickwork with sub class `B` old size brick straight or curved on plan exc 6 mtr mean radius built in cement Mortar (1:6) complete all as specified and directed.

Supply and fixing in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed of 15 mm bore complete all as specified and directed.

Supply and fixing in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed of 20 mm bore complete all as specified and directed.

Supply and fixing in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as specified and directed.

Supply and fixing galvanized mild steel wire cloth power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

E/M Portion: - Taking down old unserviceable copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Material and labour for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/steel conduit and into existing CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed. Notes: - (a) Wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per item No 136.00 here in above but One 5 pin socket outlet 5 amps on the same board complete all as specified and directed.

Description all as per item No 136.00 here in above but One 5 pin socket outlet, 5amps, independent complete all as specified and directed.

Description all as per Item No 136.00 here in above but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

Material and labour for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into an including new concealed PVC rigid/ 1.8mm wall thickness ISI marked including new CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed. Notes: (a) Wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per Ser item No 140.00 here in above but 5 Amp socket outlet on same board complete all as specified and directed.

Description all as per item No 140.00 here in above but socket outlet 5 Amps independent board complete all as specified and directed by Engineer-in-Charge.

Description all as per Item No 140.00 here in above but for one 6 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

Description all as per item No 140.00 here in above but drawn through an including new surface conduit PVC rigid non metalic conduit 20 mm dia for socket outlet 5 amp independent board complete to accomodate the accessories for PVC Gang Box complete all as specified and directed.

Description all as per item No 140.00 here in above but drawn through an including new surface conduit PVC rigid non metalic conduit 20 mm dia for socket outlet 15 amp independent board complete to accomodate the accessories for PVC Gang Box complete all as specified and directed.

Material and labour for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid/ 1.8mm wall thickness ISI marked including pressed steel with existing colour terminated boxes of Modular Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following: - Notes: - Suitable Module white cover sheets with frame as specified to be provided in replacement to MS/Galvanised sunken boxes and measured and paid separately as per relevant item. (b) Wiring shall be done by using proper colour coding (c) Earth wire shall be of green colour (d) On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per item No 146.00 here in above but 5 Amp socket outlet on same board complete all as specified and directed.

Description all as per item No 146.00 here in above but socket outlet 5 Amps independent board complete all as specified and directed by Engineer-in-Charge.

Description all as per Item No 146.00 here in above but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed.

Supply and fixing in replacement Modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular white cover plate with frame 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular white cover plate with frame 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular white cover plate with frame 3 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular white cover plate with frame 4 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular white cover plate with frame 6 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement Modular white cover plate with frame 8 module, 240 volts ISI marked complete all as specified and directed.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16 KA complete all as specified and directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve TPN 40 To 125 AMP miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in replacement for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and directed.

Supply and fixing for switch piano, flush type single pole one way 15 Amps, 240 volts complete all as specified and directed.

Supply and fixing in replacement Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

Supply and fixing Socket outlet 5 pin, 15 Amp, flush type, 240 Volts, 6 pin flush type complete all as specified and directed.

Supply and fixing in replacement Switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and directed.

Supply and fixing in replacement Switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 volts complete all as specified and directed.

Supply and fixing for bell push, flush type single pole, 5 Amp, 240 volts complete all as specified and directed.

Supply and fixing Ceiling Rose 3 terminal surface type complete all as specified and directed.

Material and labour in replacement for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Material and labour in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement bulk head luminaries IP-65 with opal diffuser 10 watt, 230 Volts LED type complete with 10 watt LED Bulb all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

Supply and fixing in replacement Calling bell Ding Dong/buzzer AC 230 Volts, single pole complete all as specified and directed.

Material and labour in replacement for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

Material and labour in replacement for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

Material and labour in replacement of copper cable for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and directed.

Material and labour in replacement of copper cable for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and directed.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

Supply and fixing in replacement unserviceable wooden/CI Shunken box with new CRCA presseed steel terminal box of size 7X4' incl taking down old complete with cemented and patch work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement unserviceable wooden/CI Shunken box with new CRCA presseed steel terminal box of size 4X4' incl taking down old complete with cemented and patch work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement unserviceable wooden/CI Shunken box with new CRCA presseed steel terminal box of size 10X8' incl taking down old complete with cemented and patch work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement Bakellite hylum sheet 3 mm thick complete with cutting and making size for fixing switches (06 Nos each) of size 8''X5'' all as specified and directed.

Supply and fixing in replacement Bakellite hylum sheet 3 mm thick complete with cutting and making size for fixing switches (12 Nos each) of size 12''X10'' all as specified and directed.

Supply and fixing in replacement Bakellite hylum sheet 3 mm thick complete with cutting and making size for fixing switches (02 Nos each) of size 5''X5'' all as specified and directed.

Supply and fixing in replacement plug top 15 Amps complete all as specified and directed.

Supply and fixing in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed including taking down old unserviceable DB/MCB any type. Notes:- (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN DB and MCCB should be of same make.

Supply and fixing in replacement PVC box (gang box) surface mounted heavy duty 3 way complete with socket outlet 2 in 1, 6 pin 5 amp 240 volt alongwith switch piano 5 amp 240 volt complete all as specified and directed.

Supply and fixing in replacement PVC box (gang box) surface mounted heavy duty 3 way complete with socket outlet 2 in 1, 6 pin 5 amp 240 volt alongwith switch piano 15 amp 240 volts complete all as specified and directed.

Labour for repair/servicing of ceiling fan of any capacity complete with strip opening the ceiling fan for repair / washing / varnishing and removing of old lubricating substance from bearing / bush using Kerosine oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning, including replacement of worn out/unserviceable minor spare parts split pin, fan body bolts, spring washer, fan rod bolt etc and PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 1.0 M long, assembling the repaired ceiling fan and testing to the entire satisfication of Engineer-in=Charge and depositing in MES Store yard complete all as specified and directed. (Replacement of Spares flexible wire etc/rewirding of ceiling fan/shall be measured and paid seperately under respective item for material and labour cost).

Descri[tion all as per item No. 199.00 here-in-above but for exhaust Fan of any type mm sweep complete all as specified and directed.

Rewinding of ceiling fan, of any make/type and size (1200/1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stater/rotor, connection and testing complete all as specified and directed.

Description all as per item No. 201.00 here-in-above but for exhaust fan of any make/type and size complete all as specified and directed.

Labour for remetalling of worn out shaft of fan, cutting, brazing, machining and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the entire satisfaction of Engineer-in-Charge to ensure smooth and noise free operation complete all as specified and directed. (Bearing shall be measured and paid separately).

Supply and fixing ball bearing of any size and type, suitable for any type/make/size of ceiling Fan complete all as specified and directed.

Description all as per item No. 204.00 here-in-above but for exhaust fan of any type/make and size complete all as specified and directed.

Supply and fixing in replacement of capacitor 230 Volt AC 50 Hz, conforming to IS-1709 and rated capacity 2.5 MFD for ceiling fan, Exhaust Fan and Wall mounted Fan complete all as specified and directed.

Description all as per item No. 206.00 here-in-above but of rated capacity 4.0 MFD for Exhaust Fan complete all as specified and directed.

Supply and connection of PVC insulated, unsheathed stranded, three core twisted copper flexible cable of size 1.5 Sqmm as required complete all as specified and directed.

Supply and fixing only bush of suitable size for exhaust fan of any type/size as per existing type complete all as specified and directed.

Description all as per item No. 209.00 here-in-above but suitable for wall mounted fan of any type/size as per existing type complete all as specified and directed.

Supply and fixing of PVC connector 4 way, 6 Amps with connection screws, nuts complete all as specified and directed.

Supply and fixing of PVC clamps with fixing screws for holding capacitor of any type and size complete all as specified and directed.

Supply and fixing of GI/ MS anodized bolts with anodized nuts, spring washers, split pin etc size 50 mm long 8/10 mm dia half threaded type with split pin hole complete all as specified and directed.

Supply and fixing in replacement MS clamp for down rod of suitable size including gromet / reel type rubber pad with bolts, nuts,split pin and washers suitable for housing ceiling fan complete all as specified and directed.

Supply and fixing in replacement of ceiling fan down rod 12 mm dia and 30/45 cm long complete with MS Clamp Rubber reel,split pin nut bolts etc. complete all as specified and directed.

Supply and fixing in replacement of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made o MS flat strips of size 25mm x 3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall complete with using fastener bolt,driling, and duly painted by two coat of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fan up to 400 mm sweep including taking down old one complete all as specified and directed.

Cleaning of ceiling fan assembly of any type/size and carrying out two coat of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint complete all as specified and directed.

Description all as per item No. 217.00 here-in-above but for exhaust fan upto 300 mm complete all as specified and directed.

Supply and fixing in replacement PVC Canopy set of two pieces for ceiling fans of any size complete all as specified and directed.

Taking down and strip opening to geyser of any make and cap 25 ltrs including disconnection of all water pipe connection and taking out water inlet/ outlet assly, removing glass wool ,the inner tank, descaling the assembly and tank , detecting the leakage, welding / brazing the defected part , repacking the glass wool and refixing the same after making it funcional including replacement of worn out nuts bolts washer etc complete all as specified and directed. Note: Cost of material and labour for providing new items shall be measured under relevant items of sch A.

Material and labour for replacement thermostat, switch electric water heater storage type of cap 25 ltr, 230 volts of existing make of geyser complete all as specified and directed.

Material and labour for replacement heating element with triangular base/round base, single phase, 230 volt, cap 2 KW of existing make complete all as specified and directed.

Material and labour for replacement heating element with triangular/round base, single phase, 230 volt, cap 1.5 KW of existing make complete all as specified and directed.

Material and labour for replacement of heavy duty PVC connection (For Hot Water) nylon threaded 450mm large (18”) 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and directed.

Material and labour for replacement of heavy duty PVC connection (For Cold Water) nylon threaded 450mm large (18”) 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and directed.

M/S A TO Z ENGINEERS

ASHFAQ AHMED MANHAS

Bidder Name

ASHFAQ AHMED MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS