Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-AOC RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.1 L+₹59,308.37 (1.50%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹40.5 L+₹98,826.19 (2.50%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹40.9 L+₹1.4 L (3.50%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹41.4 L+₹1.9 L (4.73%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
6 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN 913869 C/O 99 APO
SPL REPAIR TO BLDG NO P-51 AND ADDN/ALTN TO BLDG NO T-735 (UHF CH) AT LEIMAKHONG MIL STN
2023_MES_622238_1
8548/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹78,000
Yes
20 Jan 2024
7 Oct 2023
7 Nov 2023
7 Oct 2023
6 Nov 2023
23 Oct 2023
Amount
Schedule 'A'
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
Ditto all as per Sl item No. 2.00 here-in-above but except brick complete all as specified and directed. (NOTE: Seviceable brick obtained from demolition under Sl item No 1.00 here-in-below shall be reused under the item)
M&L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified and directed.
M&L for Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for RCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping), fair finished surface of concrete complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
M&L for rendering 10mm thick plaster in cement mortar (1:6) on other than fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
Supply only intergral water proofing compound complete all as specified and directed
M&L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:4 finishing even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand)
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete as specified and directed.
M&L for brushing neat cement slurry with 3 kg of cement per Sqm etc. complete as specified and directed.
M&L for Non -skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including rendering 10 mm thick on fair faces of brick work in CM 1:4 for recieving vertical dado tiling complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for 25 thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelled course finishs even and even and fair to tile finishes complete all as specified and directed.
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
M&L for Non-skid coloured creamic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including rendering 10 mm thick on fair faces of brick work in CM 1:4 for receiving vertical dado tiling complete all as specified and directed
M&L for 30cm x30cm x25 mm thick pre-polished coloured chequred tiles made with using grey cement and pigment, smooth finish exterior grade precast heavy duty shine finish paver tiles in floor laid over 15mm thick screed in CM 1:4, set & jointed and pointed with grey cement and pigment complete all as specified and as directed.
M&L for 30cm x30cm x25 mm thick pre-polished coloured chequred tiles made with using grey cement and pigment, smooth finish exterior grade precast heavy duty shine finish paver tiles in skirting including 10mm thick rendering on fair faces of brick in CM 1:4 for recieving vertical dado tiling, set & jointed and pointed with grey cement and pigment complete all as specified and as directed.
Demolition of stone slabs and tiles of any description of thickness in floors laid bedded and pointed in any mortar all as specified
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.
Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 25mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 30mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass, gauged etc with sash bars but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.24(a) fitted to chowkhats complete all as specified and directed.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply and fixing factory made UPVC white color Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm) , sliding sash (42mm x 67mm). Sliding mesh sash (42mm x 57mm) sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm) , Glazing bead (24.5mmx 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + -0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos, sliding Sash (30mm x 18mm),sliding mesh sash (26mmx10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners ,Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. ' (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each complete all as specified and directed
Suuply and fixing factory made UPVC white color Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm) , sliding sash (42mm x 67mm). Sliding mesh sash (42mm x 57mm) sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm) , Glazing bead (24.5mmx 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + -0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos, sliding Sash (30mm x 18mm),sliding mesh sash (26mmx10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners ,Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for payment purpose) (A) Area exceeding 2.00 sqm each complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed.
S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F MS butt hinges 100mm. (medium weight) colled rolled complete all as specified and directed
S&F Aluminium extruded barrel tower bolt 150mm complete all as specified and directed.
S&F Aluminium extruded barrel tower bolt 200mm complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 50 mm butt hunges medium weight cold rolled mild steel complete all as specified and as directed.
S&F 2nd class hard wood small fittings such as brackets of any type ,latch and hing block ,shaped door and window stops and the like including all necessary labours articles n exe 200 cu.cm each complete all as specified and directed.
S&F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed
M&L providing cement concrete 1:3:6 type C1 using 20mm graded stone agg as in hold fast complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
M&L for 18/19mm Prelaminated particle board, interior grade, prelaminated oneside with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flaps complete all as specified and directed
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed
S&F in repair water closet (Squating pattern) of vitreous china squatting pan of "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connection to trap and flushing pipe and anti syphon pipe etc complete incl trap set in and incl concrete bedding complete all as specified and as directed.
S&F in repair, Vitreous china wash basin, white oval shape, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified and as directed.
S&F in repairs Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed
S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed.
S&F PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S & F in repairs bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.
S&F in repair stop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.
S&F in repairs chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed.
S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl existing and taking down complete all as specified.
S&F as in replacement stainless steel plate rack of size 24" x 36" x 10" complete all as specified and directed. (Make: Blue Star cat No KPR-312 or equivalent in Nirali/Jain Brothers/Prayag)
S & F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
Cutting chases, pinning in. making good to facings of brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed.
S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed.
S&F 110mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.
S&F 75mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and directed.
Demolition of cement concrete of any description in any position, concrete filling in sunken floor complete all as specified and directed.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete as specified and directed.
M&L for 15 mm thick rendering to sides and bottom of sunken slab in CM 1:3 with water proofing compound , finishing the surfaces even and smooth without using extra cement complete all specified as directed. (Note :-WPC shall be measured and paid seperately)
M&L for cement concrete type B0 (using 12.5 mm graded stone aggregate) as in sunken floors 30 mm thick complete all specified as directed.
S&F GI Medium grade spouts 40mm dia projecting atleast 20cm clear of the wall complete all specified as directed.
M&L for applying two coats of hot bitumin 85/25 grade @ 1.20 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 complete all specified as directed.
M&L for PCC 1:7:12 type F 2 with bricks as in filling of sunken slab after laying carrying out required tests for CI pipes joints complete all as specifeid and directed
M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care white putty complete all as specifeid and directed
M&L for removal of existing finish, scrapping and making good surfaces on old surface of walls and applying two coat of oil bound distemper over a coat of 1mm thick wall care white putty complete all as specifeid and directed
M&L for preparation of new surface including necessary scaffolding and applying finishing walls with Acrylic Smooth exterior paint of required shade New work (Two ormore coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturers instructions complete all as specifeid and directed
M&L for removal of existing finish and preparation of old plastered surface including necessary scaffolding and applying two coats of acrylic exterior paint over a coat of primer (brand apcolite Apex manufactured by Asian or Brand weather coat manufactured by Berger or equivalent as approved by GE) as per manufacturers instructions complete all as specifeid and directed
M&L for preparation of surface plastered or unplastered new surface on ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of surface plastered or unplastered old surface on ceiling and applying one coat of white wash complete all as specified and directed.
M&L for prepraration of new or previously untreated wood surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint including preparation of old decorated wood surfaces of any description not other wise described over 10 cm width or girth complete all as specified and directed
M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M& L PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in benching of drain, surface channel complete all as specified and directed
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, molds mitred / stopped ends etc complete all as specified and directed. Note:- (1) Using Dimapur sand.
M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone agg) as in coping incl necessary formwork complete all as specified and directed.
Demolition and breaking up 75mm/110mm dia drain pipes(salt glazed ware,AC ,PVC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Dismantling of plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F 0.63mm thick, plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed.
M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E- 165) complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items
S&F 2nd class HW weather boarding, clean sawn, plain 20mm thick or reather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.
M & L for 4mm thick plywood, grade BWR, type BB fixed with nails or screws to timber frame work complete all as specified and directed.
Dismantling of framed timper scantling 40 sq .cm and over in any section,in any position complete all as specified and directed.
M&L for second class clean sawn hard wood in scantling wrought, timber framed & fixed complete all as specified and directed.
Preparation of wood and wood based materials, new or old, of any description and girth, not otherwise specifically described and treated with creosote oil complete complete all as specified and directed.
S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 150 mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed and fixedsection barrel tower bolts complete all as specified and directed.
S&F 100mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
S&F Mild steel sliding door bolts 300 mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed and fixed 300mm long complete all as specified and directed.
M & L for RCC 1:2:4 Type B1 nominal mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete vcomplete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed
Ditto, as per item no 134.00 here-in-above , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for 25 thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate ) as in levelled course finishs even for floor tile finishes complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat primer complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections and including 20mm bore brass ball valve including dismantling of old unsv tank complete all as specified in SSR Part-I and as directed.
S&F in repair stop valves (ISI marked) cast copper alloy, screwed down, high pressure, with crutch or butterfiy handle, screwed both ends for 15mm bore pipe complete all as specified and directed.
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including taking down old unsv sink from site complete all as specified
Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light point controlled by one, one way switch
One ceiling/exhaust fan point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on independent board
One socket outlet 5 Amps 5 pin on same board with other switches
All as per item No. 142.00 here-in-before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated 1100 volts grade and unsheathed, multi-stranded, copper conductor single core cable through and including concealed wiring 20 mm pvc rigid conduit all fixing accessories and suitable including 1.6 mm thick size sunk MS pressed steel terminal modular box for mounting modular switches,sockets and regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light/fan point controlled by one, one way switch
One ceiling/exhaust fan point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on independent board
One socket outlet 5 Amps 3 pin on same board with other switch
One call bell point controlled by one , one way switch
All as per item No. 147.00 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand insulator copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
Supply and fixing modular Switch Socket 6/16 , 2/3 pin combined 2 module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 12 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 8 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 6 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 4 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 3 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 1 module complete all as specified and directed.
S&F blank speacer plate for single module complete all as specified and directed.
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
Taking down / dismantling old unserviceable LED tube light fittings complete all as specified and directed.
S & F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED tube light fitting 20 W LED 6500K bright linea high quality material and design surface and wall mounted LED robust and high performance batten LED luminar comprises of extruded channel in thermally conductive materail glare and smooth light complete all as specified and directed .
Taking down old unserviceable service cable including batten/suspending wires complete all as directed.
S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.
Taking down ceiling/exhaust fan including dismantling all necessary electrical connections and kept in safe custody for refixing to its original position to facilitate repairs to ceiling/wall complete all as directed.
Refixing only ceiling fan (M D Supply) removed under item Srl No 33.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Refixing exhaust fan removed under item Srl No 33.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)
S&F Modular step type regulator 12W, 2 module ,heavy duty, 240 volts complete all as specified and directed
S & F sheet metal enclosures vertical DB (for DB's when MCCB/MCBs to be used ) Triple pole and neutral double door, IP - 54, 1 way, 415 volts with rated bus bar of size phase 200 Amp and neutral 300 Amps including MCCB 4 pole , 100 Amps, 16 KA all as specified and directed.
M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one lamp complete all as specified and directed.
Taking down old unserviceable submain wiring any size complete all as specified and directed.
M & L for submain wiring with single core 6.0 sqmm PVC FRLS insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing / capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 4.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)
S&F Modular bell push 6A, 1 module complete all as specified and directed.
S&F Buzzer , Ding Dong , AC 230 Volts single pole complete all as specified and directed.
M/s RS Enterprises & Supplier
M/S BIJOYA LAXMI ENTERPRISE
M/s SSS Motors
M/S PRADEEP CONSTRUCTION
M/s Ritz Marketing
M/S Satish Chand Agarwal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .