GE/C-30/2024-25 ADDN/ ALTN TO BLDG NO P-33 (NCs ACCN) OF 1 AHQ SIG REGT UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:4 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately.)

M&L Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L Rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered surface of wall and complete removal of existing treatment by rubbing , brooming down, washing with water etc applying two coat of oil bond distemper on wall complete all a specified.

M&L for Preparation of old surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper complete all as specified.

Dismantling water tanks and removing to store n exc 500 Ltr capicity.

Dismantling Bricks tiles (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed.

Demolition of Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) all as specified and directed.

Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting point all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as spd & directed.

M&L for rendering 10mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately.

M&L Applying a coat of bituminius primer confirming to IS 3384 @ 0.5 ltr/sqm on prepared surface of plaster. after drying of primer, applying a coat of hot blown bitumin 85/25 grade @ 1.2 kg/sqm and applying APP based Polymeric membrane minimum weighting 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt.not less than 150 grm/ sqm) and sealing joints by torch application complete all as specified. Over the APP memberane applying semi hot blown bitumin 85/25 @ 0.5 Kg/Sqm and dusting over the bitumin coat.all as specified. Notes for item No 15: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial bid other tender will be cancelled. (d) A guarantee amount of 5% of contract of work done for item No 15 of BOQ will be retained for 5 years of the completion of work.

S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner.

Supply only integral water proofing compound (ISI marked).

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed.

Dismantling of cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring.

Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick including frame confirming to IS:14587 complete to all as spd.

S&F of Stainless steel auto closing hinges openable at degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.

S&F of stainless steel handles 100 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.

S&F brass chromium plated tubular hanger rod 20 mm dia complete all as specified and directed.

S&F brass chromium plated bracket complete all as specified and directed.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame).

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame).

S&F glazed Skelton shutter IInd class hard wood 30 mm thick rebated and prepared to received glass, gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm incl filled with PCC 1:3:6 type C-0 (12.5 mm graded stone aggregate) all as specified.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm(double frame) incl filled with PCC 1:3:6 type C-0 (12.5 mm graded stone aggregate) all as specified.

M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as specified.

M&L aluminium alloy powder coated windows including aluminium coated frames sliding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double riveted and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series-A (15mm) 3 track of Jindal section number for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clips joint cleats rubber gaskets etc including provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed.

S&F aluminium ventilator partly glazed/ gauzed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , MS wire mess , 3mm thick sheet glass etc. provision for fixing the exhaust fan complete all as specified and as directed.

Providing and fixing factory made UPVC any colour sliding window. Three track of area n exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber, frame ((88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 + 0.2mm thick galvanized steel frame (30mm x 18) 02Nos, sliding sash(30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in reqd. Profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware ( Touch lock of zinc alloyed (any colur powder coated) , steel roller system, including 5mm thick toughened glass with single glazing bead and weather seal, stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note:- Net opening will be measured for payment purpose.

S &F Stainless steel grill AISI 304 grade using 10mm thick size hollow square bar (100mm c/c) weight not less 0.62 Kg/mt including necessary frame and accessories for window and ventilator grill complete all as specified and directed.

S & F mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 1mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm.

All as per item No. 52 above but 20 mm bore .

S&F for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed by Enge-inCharge.

All as per item No. 54 above but 20 mm dia.

S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as directed.

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for concealed water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.

S&F vitreous china wash basin, white, flat back, size 550mm x 400mm complete, Ist quality, incl provn of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls,making good incl providing and fixing of suitable 32mm dia CP Waste coupling complete all as specified and directed.

S&F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap (excluding flushing cistern & flush pipe) complete all as specificed and directed.

Supply only PVC low level white flushing cistern valveless symphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified.

S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F for 15 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F for 20 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed.

S & F in repair concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified.

S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture model Quarter half turn (SOLO) of as complete all as specified & directed.

S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO) as all specified and as directed.

S&F in repairs chromium plated soap dish fancy type all directed. complete all as directed all as specified .

S & F in repair towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embedded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in sunken floors, paving and any position and any thickness up to double story building complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ( size 600 mm x 600 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item no. 80 above except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.

M&L for machine cut polished Machine cut Kota stone 20-25mm thick as in floor, tread, riser, pillar fixed with neat cement slurry over backing coat of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified.

M&L for PCC 25mm thick 1:2:4 type B1( using 12.5mm graded crushed stone aggregates )as in sub flooring G+2 storey bldg complete all as specified.

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm to 40mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site. Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

M&L for followings :- (i) M&L for chipping of spalled and loose concrete and Removing plaster & finishes all around the coloumns, slabs & beams (on all four sidescription of column to full height , three sidescription of beam to entire span & bottom of slab to area as directed) (ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible) (iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed) (iv) Cleaning exposed concrete substrate by using water jet. Note : The rate quoted by the contractor is inclusive of scaffolding and the item shall be executed in small patches/large patches based on site requirement.

M & L for removal of rust from reinforcement completely by rubing with wire brush or emeray paper and proper cleaning of reinforcements with RUSTKLENE or Sika rust off-100 (Rust converter manufactured by Sika India Pvt Ltd) or equivalent in MC Bauchemie India Pvt Ltd, or FOSROC Industries Bangalore as per manufacturer’s instructions complete all as specified and directed. Note : The rate quoted by the contractor is inclusive of scaffolding and the item shall be executed in small patches/large patches based on site requirement.

M & L for application of zinc rich primer coat for corrosion protection on reinforcement bars BUILDCOAT (ZP) or Friazinc-R (Primer manufactured by Sika India Pvt Ltd) and shall be applied in a manner such that primer shall be a coating of atleast 40micron complete all as specified and directed. Note : The rate quoted by the contractor is inclusive of scaffolding and the item shall be executed in small patches/large patches based on site requirement.

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed. Notes for item No 87 to 91: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial bid other tender will be cancelled. (d) A guarantee amount of 5% of contract of work done for item No 87 to 91 of BOQ will be retained for 5 years of the completion of work. (e) Guarantee clause for rehabiliation of bldg will be provided by the authorised applicator for 5 years.

S&F Mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified.

M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor & surfaces finished even and fair using extra cement, complete all as specified.

Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louvers and jallies 25mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified. (ISI Marked)

S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter incl bends.

S & F 100 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.

S & F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.

S&F in repair 100mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.

S&F in repair 75mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete.

Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge.

M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate) as in sub base.

S&F Endura colours paving tiles 300cm X 300cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.

M & L Impregnating cream for injection into masonry or concrete wall 230 mm thick against capilary rising humidity complete all as specified and directed. Method of Applicaion Methodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debris, or any separation layers. (b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. (c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edges/joints need to be levelled ; loose concrete to be removed. (d) Drill boreholes at ground level horizontally. The boreholes are drilled horizontal into the masonry. (e) Drilling of hole will be at the interval of 1m centre to centre.

S&F in repair 20 mm Dia stainless steel tube for curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.

M & L for preparation of new plastered surface on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. Notes for item No 114 & 115: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial bid other tender will be cancelled. (d) A guarantee amount of 5% of contract of work done for item No 114 & 115 of BOQ will be retained for 5 years of the completion of work.

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc to match the existing surface.

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size, including coduit and make from the site complete all as specified.

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylem sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

All as per Item No 120 above but one light/fan point controlled by one by one way switch.

All as per Item No 120 above but One bell point controlled by one by one way switch.

All as per Item No 120 above but one 3 pin socket outlet 5 hole 5 Amp independent board , socket & switches to be measured and paid separately.

All as per item No 120 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

All as per Item No 120 above but one light point controlled by two, two way switch.

One power point with insulated stranded copper conductor cable 4 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified.

M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.

M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified.

M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

M&L bell push,flush type,5 amp ISI marked complete all as specified.

S & F electronic fan regulator 5 step ISI marked connecting complete all as specified.

M&L switch piano flush type 5 Amp SP two way .

M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

M&L bell electric (ding dong) 230 volt, SP all as specified and directed.

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.

S & F LED bulb 12 watts, 1200 lumens output, 6500K suitable for B-22 base .

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6.0 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L in replacement MCCB 63 Amps, 16 KA , 4P, complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

M&L MCB SPN 40 Amp "B " curve.

M&L MCB SP 6 to 32 Amp "B" curve.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete.

Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and deposits in MES Store all as specified and directed.

Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep (against normal ceiling fan converted to BLDC ceiling fan) including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.

S&f fresh air fan PVC body, air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.

S&f exhaust fans AC single phase 230/240 V of size 300 mm sweep, 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers metal body with louvre for fixing of exhaust fan complete.

Taking down carefully the existing Exhaust/Fresh air fan of any size from its position after disconnecting electric connection and checking it for its serviceability and refixing all as specified and directed.

M&L for breaking the old existing wall and making provn of a round hole for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete.

S & F water heater storage type Geyser ABS body vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet water connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .

Taking down carefully the existing elect meter of any size from its position after disconnecting electric connection & refixing the same location all as specified & directed .

S&F wall mounted steel enclosure size of 35cm x 40cmx 14 cm (LXWXH) for housing electric meter made out of 1.6mm CRCA sheet duly powder coated having front opening for meter inspection post with transparent sheet complete, fixed to wall semi recessed in wall complete all as specified and directed.

M & L for preparation of newly or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Schedule of Credit

M/S MANINDER CONSTRUCTION CO. (BID ID -3084567)

R S CONSTRUCTION CO. (BID ID -3077459)

GIAN ENGINEERS (BID ID -3093623)

M/S Parmod Johar (BID ID -3081219)

S D Constructions (BID ID -3093297)

M/s M M BAHL (BID ID -3094250)