CONSTRUCTION OF TYPE-1 RESIDENCE, BOUNDARY WALL, INSPECTION HOUSE, ROAD AND SUB-DIVISION OFFICE IN PARTAWAL COLONY AT IRRIGATION DIVISION GORAKHPUR IN DISTRICT MAHRAJGANJ.

Amount

Earth work in foundation including digging and refilling the trenches with its proper disposal within 30 meters lead and 1.50m lift with all T&P etc.

Earth filling from G.L. to plinth level with lead of 1.00 Km from the site of work including loading unloading, filling, leveling, watering compacting and dressing with all T&P etc.

dismentalling of 12 mm thick Plaster in including all cost of materials,T&P and labours etc.

Providing and injecting chemical emulsion for pre constructional anti termite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth junction of wall and floor along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc complete. Aldrine emulisifiable concentrate or any other approved material such as Hepthachlor or Chlordance will be used. The rate of application of chemical emulsion shall be as follows. (i) Treatment for masonary and foundation 5 Ltr/Sqm (ii) Back fill in immediate contact with foundation 7.5 Ltr/Sqm. (iii) Treatment of top surface of plinth filling 5 Ltr/Sqm (iv) Treatment junction of soil along external perimeter of building 7.50 Ltr/Sqm. (v) Treatment of soil under apron along external perimeter 5 Ltr/Sqm.

Cement Concrete with 40mm gauge Ist class Brick ballast, coarse sand and cement in proportion of 1:4:8 in foundation including cost of all materials, labour and T&P etc.

Cement Concrete with 40mm gauge Ist class Brick ballast, (ballast taken by brekaing old brick) coarse sand and cement in proportion of 1:4:8 in foundation including cost of all materials, labour and T&P etc.

Cement Concrete with 40mm gauge Stone ballast, coarse sand and cement in proportion of 1:4:8 in foundation including cost of all materials, labour and T&P etc.

Ist class brick work in 1:6 cement and coarse sand in foundation, plinth and Boundary wall including cost of all materials, labour and T&P etc.

Ist class brick work in 1:4 cement and coarse sand in Super structure etc including cost of all materials, labour and T&P etc.

Ist class brick work in 1:3 cement and coarse sand in septic tank, soak pit & parapet wall including cost of all materials, labour and T&P etc.

Centering and shuttering of R.C.C. work including cost of all materials, labour and T&P etc.

R.C.C. work with cement, coarse sand and 20 mm gauge stone aggrigate with nominal mix 1:1.5:3 in Plinth, beams, lintel, slab etc including cost of all materials, labour and T&P.

R C.C. work in 1:2:4 (M-15) sonbhadra coarse sand of FM. Not less then 2.50 and dala grit (10mm to 20mm.) . including all cost of materials,T&P and labours and other accessories required for proper completion of work. As per of direction of Engineer in Charge.

Reinforcement work with cutting, bending and binding of steel (Fe 500 HYSD Bar) and placing in proper position including cost of all materials, labour, T&P etc.

Supply and fixing Angle iron frames for Doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete and fixed to steel windows by welding.

Supply and fixing mosquito proof jali having 5 mesh in cach cm made of 24 B.W.G. wire of heavy quality and including cost of 25x5 mm flat iron around the jali etc complete.

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws)

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.(35mm thick including ISI marked Stainless Steel butt hinges with necessary screws)

Fixing panes of glass with Aual or equivalent I.S.I. marked quality putty. Brads and springs complete including cost of material & labpour etc. (3.8 to 4.7 mm thick)

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour of shade, with nuts and screws etc complete : (250x16mm size)

Providing and fixing bright/matt finished Stainless Steel handles of approved quality and make with necessary screws etc all complete. (size 125 mm)

12 mm thick cement plaster with 1:3 cement and coarse sand mortor including cost of all materials, labour and T&P etc

12 mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand over brick work including cost of all materials, labour, T&P etc.

Flooring 40 mm thick 1:2:4 cement, coarse sand and 20mm stone grite laid in panels finished with 3mm (1/8") floating coat of neat cement including cost of all materials, labours, T&P etc.

Supply and fixing 6mm thick CHINA white glazed tiles (ceramic tiles) in flooring skirting or dado with 1:3 cement and approved coarse sand working and the joints finishing with white cement slurry, jointing and polishing complete including supply of all materials and wastage labour tools and etc. Required for the proper completion of the work.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

One priming coat of cement primer and two coats oil distemper on new work including cost of all materials, labour and T&P etc.

Painting or vernishing new iron work in small areas or new wood with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed synthetic enamel paint of approved brand such as British paint, shalimar, Asian or equivalent ISI approved paint including cost of all materials, labour, T&P etc.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron PorS trap 10litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS :7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern WC pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back urinal of size 580x380x350 mm with 5 litre P.V.C. flushing cistern, flush pipe, C.I. trap and grating complete in all respect.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings,G.I clamps and C.P. brass coupling complete, including painting of fittings, cutting and making good the walls and floors etc. wherever required: Single squatting plate with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting, making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. (b) For 75 mm dia pipe

Providing and fixing PVC pipe conforming to IS make working pressure 6Kg/SqCm incuding testing labour, T&P and all complete fittings. 110 mm diameter

Providing and fixing PVC pipe conforming to IS make working pressure 6Kg/SqCm incuding testing labour, T&P and all complete fittings. 140 mm diameter

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2coarse sand :4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the wall etc.

`(a) 16 mm dia nominal outer dia pipes.

(b) 20 mm dia dia nominal outer dia pipes.

(d) 32 mm dia nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm dia nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing CP brass stop cock (concealed) of standard design & of approved make conforming to IS: 8931.15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm dia nominal bore.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing M.S. foot rests including fixing in manholes with 20x20x 10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: With 20x20 mm square bar.

Providing & fixing soil, waste and vent pipes : 75 mm diameter : Sand cast iron S&S pipe.

Providing & fixing single equal plain junction of required degree :100x100x100mm sand cast iron S&S

Supplying and fixing C.I. cover without frame for manholes : 455 x 610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Making soak-pit 2.5m. diameter and 3m. deep with 45x45cm dry brick honey comb shaft with F.P.S bricks and SW drain pipe complete as per standard design.

Providing filling brick bats.

Providing filling 20 to 40 mm brick ballast.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc complete : 100 mm diameter.

Wiring points for light with 1.5 sq mm F.R.P.V.C. insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm F.R. P.V.C. insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc complete in all respects. For Earth continuity wire and piano type switch etc complete in all respects

Wiring points for light with 1 sq mm FRPVC insulated multistrand single core copper condutor cable in P.V.C. conduit pipe partly concealed in wall&partly laid in slab along with the reinforcement before concreting, complete with 14SWG copper earth continuity wire and two number two way piano type switches & ceiling rose/ angle/battern holder on 3mm thick phanolic laminated backelite sheet etc complete in all respect as directed including matching colour wash.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 1.75mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and wiring of submain with two number 4 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting with one number 14 SWG copper earth continuity wire including matching colour wash etc complete in all respects but in 20 mm dia heavy duty (2mm thick) PVC conduit with one no 2.5 sq. mm FRLSH PVC insulated multisrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and wiring of submain with two number 4 sq mm FRLSH PVC insulated 1100V grade multistrand single core aluminium conductor cable in 20 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting with one number 14 SWG copper earth continuity wire including matching colour wash etc complete in all respects but in 25 mm dia heavy duty (2 mm thick) PVC conduit with one number 4 sq. mm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and wiring of submain with two number 10 sqmm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with reinforcement before concreting with one number 10 SWG copper earth continuity wire including matching colour wash etc complete in all respects but in 25 mm dia heavy duty (2mm thick) PVC conduit with one no 6 sq mm FRLSH P.V.C. insulated multistrand copper conductor cable as earth continuity wire drawn in conduit.

Supply and fixing of single light wall bracket on matching M.D.F. E.G. board base etc complete all respect.

Supply and fixing of factory wired H.P.F. box type fluorescent tube light fitting suitable for 1x40 watt fluorescent tube complete including tube etc on surface complete in all respect.

Supply and fixing of factory fabricated M.S. box in existing sunk of size 600mmx480mmx200mm deep with godrej type almirah, cover with handle etc fabricated from 18 S.W.G. (1.25 mm) M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry & DP/TPN fixing arrangements and provision for compartment for loose wires openable housing on the top and hold fast etc including cost of all material, labour, T&P etc required for proper completion of the work.

Supply and fixing of 63 Amp 4 pole MCB

Supply and fixing of polished MDFEG/Teak ply cover for surface type BDB above 4 ways complete with 50mm hinges, aluminium kunda, chhapka and handle etc complete in all respect.

Construction of recess of 600mmx480mmx200mm size of main boards, distribution boards of all sizes including cutting of brick work, providing lintel of suitable size & thickness, plastering etc with supply of all materials,labour,T&P required for proper completion of the work.

Providing and laying of 1 Shaped mechanically compressed Interlocking cement Concrete block pavement having thickness 80mm Manufactured by high pressure and controlled vibration machine of OPC cement mixed with 25%marble powder with minimum 5mm thick topping,having compressive strength not less them 30MP a including cost of all material, labour,T&P leveling & dressing of surface to required level & slope, spreading and moisting 30mm thick local sand including filling joints for proper completion of the work including all type of taxes, T.T. etc asper drawing & Technical specification, MORD-1504 NS-10 Chapter-20 Road work. (New item)

M/S RAI AND COMPANY