PROVN OF OR LIVING SHELTER AT 18 KUMAON, PATHWAY FORM COOK HOUSE TO FENCING AREA AND INTERLOCKING TILING FROM MANDIR TO RATION STORE AT CHUJE GG UNDER GE TAWANG

Amount

B/R Portion Surface excavation n.exc 30cm deep & averaging 15 cm deep and getting out in hard / dense soil completed all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 M in depth for foundation, etc. or for shaft, wells, cesspits, manholes, pier holes, etc,. not exceeding 10 Sqm on plan and not exceeding1.5 M depth and getting out hard/dense soil completed all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate completed all as specified and directed..

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.

M&L for PCC 1:3:6 type-C1 20mm graded aggregate in pre-cast cement concrete block masonry with solid blocks exc 10cm in width and setting in CM 1:4 completed all as specified and directed..

M & L for hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface completed all as specified and directed.

M & L 150mm for cement concrete type D2 1:4:8 (40 mm graded aggregate) completed all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for layinf floor finishes (CM 1:4) completed all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0. 18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match completed all as specified and directed.

M&L formwork to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter completed all as specified and directed..

M &L for RCC nominal mix type B1 1:2:4(20mm graded aggregates foundation, including rafts footings, foundation beams, plinth beams: bases for columns, etc: basement slabs, under reamed piles and mass concrete completed all as specified and directed.

M & L formwork for fair finsihed surface to sides of pillars, posts, struts, piers, columns and stanchions completed all as specified and directed.

M&L for RCC nominal mix type B1 1:2:4 (20 mm graded aggregate) columns, pillers, post & structurs completed all as specified and directed.

M & L formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc completed all as specified and directed.

M & L for RCC beams, cantilevers, bressummers, lintels over 1.5 m span type B1 1:2:4 (20mm graded aggregate) completed all as specified and directed.

M&L mild steel TMT bars 12mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality completed all as specified and directed..

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders completed all as specified and directed.

S& F steel work in tubular trusses including special shaped washer etc. complete usng ERW or induction butt welded tubes comforming to IS 1161-1998 grade st-240 for roof trusses (framed), trussed, purlins,completed all as specified and directed.

S & F pre-painted galvatume aluminium zince coaing GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screwscompleted all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws completed all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) without using extra cementcompleted all as specified and directed.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) without using extra cement completed all as specified and directed.

M & L for preparing of newly plastered surfaces and applying two coat of distemper oil emulsion over clearcolle on plastered and other surfaces to distempering completed all as specified and directed.

M & L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface completed all as specified and directed.

M&L galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : Zipro/ M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in hard/dense soil completed all as specified and directed.

Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point completed all as specified and directed.

S&F 2nd class hardwood plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints completed all as specified and directed.

M & L two coat of synthetic enamel paint over a coat of red oxide primer to new steel surfaces including preparation exc 10 cm width or girth incl completed all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil puty in square nexc 0.5 sqm in each pane completed all as specified and directed.

S&F for 30mm thick 2nd class Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats completed all as specified and directed.

S&F for 25mm thick 2nd class Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats completed all as specified and directed.

S&F butt hinges 100mm size, medium weight, cold rolled mild steel completed all as specified and directed.

S&F butt hinges 75mm size, medium weight, cold rolled mild steel completed all as specified and directed.

S&F aluminium, anodised, barrel tower bolts 100mm long of extruded sectioncompleted all as specified and directed.

S&F aluminium, anodised, barrel tower bolts 125mm long of extruded section completed all as specified and directed.

S&F aluminium handles 125mm size, cast type, anodised completed all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy completed all as specified and directed.

M&L for preparation of new wood surfaces and applying two coat of synthetic enamel paint over a coat of pink primer completed all as specified and directed.

S & F boarding second class hardwood 40 mm thick supplied & fixed with nails in any situation (except flooring and skirting) clean sawn with butt joints 40, complete all as specified and directed.

M and L for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even complete all as specified and directed.

M&L 15mm thick, screed bed or bedding layer, in cement mortar (1:6) for laying floor tiles etc, complete all as specified and directed.

M&L for 100mm thick PCC type B- 2, 1:2:4 (40mm graded aggregate) as in footpath, hardstanding, finishing cement concrete surface by making impressions of expanded metal whilst the concrete is green, complete all as specified and directed completed all as specified and directed.

M&L chequered cement concrete tiles 200mmx200mmx25 mm thick, set jointed and pointed in neat cement slurry using grey cement and pointed with white cement and pigment as in paving/foot path etc as required complete all as specified and directed.

E/M Portion M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity completed all a specified and directed

All as per item No 45 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed

All as per item No 45 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed

All as per item Ser No 45 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth completed all as specified and directed

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts completed all as specified and directed

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts completed all as specified and directed

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts completed all as specified and directed

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm completed all as specified and directed.

Supply & fixing Surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. Make Havells ENDURALINEARNEOBS20WLED840SPCWH & equivalent make specified.

S&F security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwithtwin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed.Make Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified.

S&F security LED light battern holder, 1x10W LED luminiaries Complete with all acessories and including connecting upwithtwin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, and all fitting accessories complete all as specified and directed.Make Havells Cat part No.LED Adore Lamp 10W B22 WW & equivalent make specified.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for battern fittings completed all as specified and directed.

S&F MCB distrubution board SPN 8 way double door, sheet steel,phosphatised,powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V complete all as specified and directed.( for living sheltor)

Supply and Fixing MCB SPN 240V 40 Amps,10 KA complete all as specified and directed.

Supply and Fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed.

S & F XLPE insulated heavy duty electric cables with Aluminium conductor, 1100 volts grade, cross sectional area 2corex10SQMM along the wall/Earth. Complete all as specified and directed. ( from LT panel to living sheltor Shed SPN DB as incoming).

M & L for Sand filling under floors in foundations & in trenches including watering and consolidation. Complete all as specified and directed.

M & L for reinforced precast concrete cable cover, class LV Type 1, flat size 250mmx150mmx40mm. Complete all as specified and directed.

M & L for Tubes 'Light grade" galvanised 40mm for cable protection. Complete all as specified and directed.

M&L in replacement of circuit/submain wiring alongwith earth wire with the size of 2x4 Sqmm + 1x2.5 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping complete fixing on wall, roof and floor completed all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as specified and directed shown on electrical plate No 5 of SSR Part –I (2009).

M/S TSERING DHONDUP

M/S GOLANG CONSTRUCTION CO.

M/S L G BUILDERS

DEOGRATIES SEMPER AMA ASSOCIATE

M/S ARUNACHAL VIKASH

L T CONSTRUCTION

L K THONGKHAR TRADERS