Construction of Urban Police Station building with development works at NACHIYARKOVIL in Thanjavur District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6) Supplying and filling with 40mm HBSJ

2.7) Supplying and filling with 20mm HBSJ

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

23.3) Supplying and fixing of Magnetic door catches

24) Manufacturing & supply of steel windows (weight basis)

25) Supplying and fixing of MS hold fast

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of Chromium plated 8 gauge picture hook

50.3) Supplying and planting avenue trees

50.4) Providing Tree guard

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

53.3) Supplying and fixing of C.I. steps (5 Kg)

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

72) Supplying and fixing of Box type Fibre Fan hook

73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase 32A per way with neutral link

74) Charges for assembling and fixing of ceiling "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

81) Supplying and fixing of meter cupboard with best Country wood double leaves shutters

86) Providing Pre-constructional Anti termite treatment

Annexure 2.1.1) Supplying and filling the Foundation and basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

2.1.6) Supplying and filling of crushed Stone dust

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) b. In First Floor

c. In Second Floor

12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8¾ "x 4¼ "x 2") 50mm tk using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

c. In Second Floor

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 20mm thick b. In First floor

c. In Second floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

c. In First Floor

d. In Second Floor

16.1.1) Precast Jally ventilator 50mm thick using standardised concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

f. For Curved Surface

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 20 Grade using crushed stone sand with Admixture c. 1000 x 2100mm

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size c. 1000 x 2100mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

23.5) Supplying and fixing of door with Iron bar & M.S Flat for the door Shutter (Lockup) a.1000 x 2100 mm

24.1.1) Supplying and fixing of ventilator with iron bars and MS flats (Lock up) a) V-1350 x 600mm

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

35.1.1) Plastering in CM 1:3, 12 mm tk. with Admixture and mixed with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border

b. 75 mm wide Border

c. 50 mm wide Border

38.4.2) Providing one coat of wall putty for new plastered surface

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450x300x150 mm using crushed stone sand

50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand with Admixture

50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand

52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC as per IS 10124/1982 Part II a) 110mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Modular) a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

c. Calling bell point with Buzzer/Calling bell

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point controlled by 6A Modular switch 1 way

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point controlled by 6A Modular switch 2 way

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself controlled by 6A Modular switch 1 way

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places controlled by 6A Modular switch 1 way

71.2) Supplying and fixing of 32 Amps triple pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5.1) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

79.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit

80.1) Supplying and fixing of 450x375x20mm T.W. plank

84.4) Run of Main 4 wires of 4 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

85.1) Supplying of G.I pipe 40 mm dia, 'B' class

87.1) Supplying and fixing of Three Phase ELCB/RCCB

99) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1800 x 2100mm

99.1) T.W.double leaves Panelled door shutter with brass fittings Suitable for door of size a. 1200 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts LED bulb

105.1) Run off main 4 wires of 4 Sq mm. (3 phase EB service connection)

110) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA

114) Supplying and laying of 3.5 core of 50 Sqmm PVC armoured LTUG cable (Below Ground level)

116) Labour charges for laying of 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable above ground level

117) Supply and fixing of brass cable gland for 3.5 core 50 Sqmm PVC armoured LTUG cable gland

117.1) Supply and providing cable end termination of 3.5 core 50 Sqmm. PVC LTUG aluminium armoured cable

118) Supplying and fixing of 900x700x250mm tk EB service panel

119) Supplying and delivery of 2 HP clear water vertical wet type single phase submersible pumpset suitable for borewell Duty - 20 lpm x 125 m

119.1) Supplying and delivery of 1 HP open well submersible pumpset Duty - 125 lpm x 25m

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

121.1) Supply and delivery of Direct online starter single phase panel board with two level guard and auto start 2 HP

121.2) Supply and delivery of three phase 1 HP Panel board star delta starter

122) Supplying and fixing of following dia of the PVC, GI & GM specials a) 50mm dia PVC Coupling

b) 50mm dia PVC Tee

c) 50 x 40 mm dia PVC Reducer

d) 50 mm dia PVC Elbow

e) 40 mm dia PVC Coupling

f) 40 mm dia PVC Elbow

g) 40 mm dia PVC Tee

h) 40 x 32mm dia PVC Reducer

i) 50mm dia GI Bend

j) 50mm dia GI Union

k) 50 mm dia GI Hex Nipple

l) 50 mm dia CI Foot valve with stainer

m) 40 mm dia GI Bend

n) 40 mm dia GI Union

o) 40 mm dia GI Tee

p) 50 mm dia GM Non-Return valve

q) 50 mm dia GM Gate valve (Heavy duty)

r) 32 mm dia GI Union

s) 32 mm dia GI Hex Nipple

t) 32 mm dia GM Gate valve (Heavy duty)

u) 25 mm dia GM Gate valve (Heavy duty)

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124) Supplying and delivery of following dia GI pipes 'B' class in position a) 50mm dia GI pipe

b) 40mm dia GI pipe

125) Supplying and delivery of following dia PVC pipe a) 50mm dia PVC pipe/10 Kg/cm2

b) 40mm dia PVC pipe/10 Kg/cm2

126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

128) Supplying of 32mm dia Cast Iron Adopter

129) Supplying and fixing in position of TamilNadu Police round logo emblem a) 45 cm size (18")

129.1) Supplying and fixing in position of Aluminium die casting TNPHC Logo emblem a) 60 cm size (24")

130) Supplying and fixing of following Aluminium die casting letters and Numbers a) 30cm Letters (12")

b) 23cm Letters (9")

130.1) Supplying and fixing of Plastic name board of required size

132.1) Charges for developing the Borewell with Air compressor of 600 CFM capacity (Minimum 8 Hrs)

132.2) Drilling of Pilot bore of 140mm / 150mm dia any where in Tamilnadu including Transporation from one place to another within Tamilnadu in alluvial soil sedimentary strata or clay and sand stone shale pebbles boulders etc., a) Upto 76m depth ending below Ground Level

b) From 76m depth upto 91m depth ending below ground level

132.3) Reaming of 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60m depth ending below ground level

b) From 60m depth and upto 90m depth ending below ground level

133) Supplying and delivery of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe (Casing Medium Depth) without slot

b) 150mm dia PVC Casing Pipe (Ribbed screen pipe) with slot

133.1) Labour charges for inserting 150mm dia PVC casing pipe assembly (with slots or without slots) in the drilled hole including jointing the Pipes with PVC couplers with cement paste etc., complete

134) Supplying and fixing of 200mm dia PVC end cap suitable for covering the borewell casing pipe

134.2) Supplying of following dia UPVC column pipe for Borewell a) 32mm dia UPVC column pipe

134.3) Supplying and fixing of 32mm dia PVC Heavy pipe for submersible flat cable

136) Supplying and fixing of 500W Focus light fittings

137) Supplying and fixing of 250 watt sodium vapour lamp & fitting

138) Supplying and fixing of 12" dome light fittings and 9 watts LED bulb

139) Supplying and fixing of spot light fittings and LED bulb

140) Supplying of 3 to 10mm size HBS jelly etc.,

142) Supplying of Rubber Moulded Hydraulic pressed Paver block 83mm thick

142.1) Delivery of 83mm thick Paver block including labour charges for loading and unloading charges and conveyance by lorry to site

143) Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness with compaction by earth rammer and laying of 83mm thick Paver block including Machienry charges

153) Supplying and fixing of MS angle of size 50X50x5mm

156) Supplying and fixing of 3 Nos. of 100 Amps 500 volts grade porcelain fuse unit

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

367) Providing wooden melamine polish for main door new wood work

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.5.1) Supplying and laying of Granite tiles flooring of size 2'x1', 10mm tk (Ruby red) over cement plastering in CM 1:3 20mm thick using crushed stone sand

448.2) Supplying and fixing of PVC Tee with end cap of 32mm dia

571) Supplying and fixing of Galvalume sheet roofing 0.47mm thick

572) Supplying and fixing of metal and iron works including labour charges for petty iron works

796) Two coat of Exterior emulsion paint including primer for outer wall

796.1) Two coat of Plastic emulsion paint including primer for inner wall

A VELANI

BHARATH BUILDING CONSTRUCTION