SPECIAL REPAIR TO MESS STAFF ACCN (OR LINE) AT HQ DELHI AREA OFFRS MESS AND SPECIAL REPAIR CGI/ANO MESS and CONNECTED WORKS AT GIRLS AREA OF DGNCC CAMP UNDER GE (EAST) DELHI CANTT-10

Amount

Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified & directed

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed

Taking down wall panelling and similar works complete all as specified & directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed

Demolition of cement Concrete (unreinforced )Concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed

Demolition of cement Concrete (reinforced )Concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed

Dismantling of cast iron or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

Demolition Stone slabs/ paver block and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified & directed

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 15mm, complete all as specified & directed

Taking up or down steel tubing with connections for cleaning for refixing or removing to store yard complete of bore 20mm complete all as specified & directed

Dismantling water tanks upto 1000 Ltrs capacity and removing to store complete all as specified & directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n.exc 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.50 sqm and n.exc 4.0 sqm each complete.

M&L brick work with sub class 'B' st or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with sub class 'B' st or curved on plan exc 6 m mean radius built in cement mortar 1:4 half brick thick

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for 1st quality Joint free ceramic coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) as in Ground floor complete all as specified

M&L Rendering 15 mm thick in CM (1:4) as in backing coat for fixing wall tiles complete all as specified & directed

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 600mmx 300mmx 7 mm or 450mmX 300X 7mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles in complete all as specified and directed.

All as per item No 19 here-in-before but as in skirting, steps, etc laid over and including 10 cm rendering in CM 1:4

M&L for providing cement concrete type 1:2:4 type B-0(12.5 mm graded agg ) as in roof kerbs or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified.

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified & directed

M&L Framed work as in doors or gates /grills and gratings of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering,running rails and guides) and hanging; also fastening and fixing confirming to FE 290 gde E-165 complete all as specified and directed

S&F Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a) complete all as specified & directed\

S&F for 35 mm thickness flush shutters, solid core construction, with particle board core and plywood face panels both faces covered with decorative face veneer with lipping incl edge to match frame complete all as specified and directed.

S&F, Factory made solid coloured PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC colour sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete in opening as per specification & drawing all as directed

S&F, factory made solid coloured panel PVC door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded wood grain printed PVC sheet cover PVC "C" channel having a wood grain printed PVC sheet strip of 20mm width stuck in side with solvent cement for styles and wood grain printed PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable decorative PVC beading of 10mm x 10mm and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification and shown on drawing in SSR Part II 2004.

S&F solid PVC board plain sheet of 15 mm thick for kitchen cabinet & wardrobe/ cupboard etc similar work ncluding necessary fixing arrangement complete all as specified and directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer

S&F solid PVC board prelaminated coloured sheet of 15 mm thick for kitchen cabinet & wardrobe/ cupboard etc similar work ncluding necessary fixing arrangement complete all as specified and directed. Make : Rajshree or equivalent all as specified and approved by Accepting Officer

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified & directed

S&F 100mm dia Aluminium anodised handle fabricated type polished bright finish complete all as specified & directed

S&F150 mm dia Aluminium handle fixed with screw complete all as specified and directed

S&F Continuous (Piano) hinges, brass body 30 mm width of flaps (when open) complete all as specified & directed

S&F 150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified & directed

S&F Stainless Steel Butt Hinges 100mm long complete all as specified & directed

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed

S&F galvanised mild steel wire cloth 0.41 mm nominal dia of wire of average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staple complete all as specified & directed

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick complete all as specified & directed

All as per item No 39 here-in-before but frosted/ pin headed glass 3 mm thick

S&F in repair Floor 150 mm long door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified as directed.

S & F for steel windows box type 16 gauge steel section for frames & shutters as per drawing No- TD- A sheet 01/03 to 03/03 with openable glass and gauze shutters including pintel hinges 75 mm long 12 mm dia,100 mm long handle & tower bolt 150 mm long, M S hooks & eyes 150 mm long complete all as specified and as directed ( Note: Glass & wire mesh shall be measured & paid seperately)

S & F for steel ventilators box type glazed shutter with 16 gauge steel section for frames & shutters as per drawing No-D- A sheet 01/03 to 03/03 with openable glass and gauze shutters including pintel hinges 75 mm long 12 mm dia,100 mm long handle & tower bolt 150 mm long, M S hooks & eyes 150 mm long complete all as specified and as directed by the Engineer-in-Charge (Note: Glass shall be measured & paid seperately)

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor with all fittings complete all as specified & directed

S&F Rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with threaded lead) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres all as specified .

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified & directed

S&F 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 20mm-45gms) complete all as specified & directed

Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surfaces complete all as specified & directed

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface (internal) etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

M&L for 15 mm thick external rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

Supply only liquid water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika ) complete all as specified & directed

M&L Complete removal of existing treatment from walls/ ceiling and preparation of old surfaces, of any description, complete all as specified.

M&L for complete removal of exisitng treatment of old decorated surfaces of walls and ceiling and applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed

M&L Preparing new/old plaster surfaces of walls applying two coats of OBD over a coat of primer over a layer of 2mm thick JK Wall birla Putty complete all as specified

M&L Preparing new ceiling surfaces applying two coat of OBD complete all as specified.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

S&F in repair Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F in repair PTMT grating round 150 mm size, all as specified.

S&F in repair Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed all as specified.

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, fixed in repairs complete all as specified & directed

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified & directed

S&F in repair Stop valves fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions of bore dia 15mm and fixed, complete all as specified & directed

S&F in repair Stop valves/Angle 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed

S&F in repair for Gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 20 mm bore complete all as specified & directed

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified.

S&F in repair Vitreous china squatting pan of Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring complete all as specified & directed.(Make: - Hindware/ Parryware/ Johnson )

S&F Vitreous china one piece counter top wash basin, white , of size 410 x 410x160 mm including coupling, bottle trap/waste pipe, fixed in repairs, complete all as specified and directed. Make : Prayag Cat Part No 4702 or equivalent in Jaquar/Somany/Cera as approved.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified & directed.(Make: - Parryware or equivalent in Hindustan Sanitary ware)

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified & directed

S&F in repair PVC waste pipe 1m long suitable for 32m dia waste coupling complete all as specified.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement Concrete Type D-2 (using 40mm stone aggregate) for 110mm bore pipe complete all as specified & directed

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F PVC (SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

S&F PVC (SWR) pipes, 110 mm external dia single socketed in any length with rubber joints, laid in trenches or floors complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia complete all as specified & directed

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified & directed

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvant cement complete all as specified & directed

S&F for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipecomplete all as specified and directed.

Providing precast cement concrete in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry),string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, weatherings, throat- ing etc. and setting in CM 1:4complete with joints to match etc using type B1 , 1:2:4 (using 20mm graded) stone aggregate complete all as specifed and directed

Demolition of mud phuska treatment any thickness incl plastering and leaping plaster any thickness incl old brick tile/APP and removing rubbish from site and dumpling as area specified by delhi munciple corporation complete all as specified and directed.

M&L cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

M&L PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface complete all as specified and directed.

M & L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumin painting with hot blown grade bitumin 85x25 @ 1.20Kg/ Sqmtr and laying of APP based polymetric membrane minium weight 3kg/ sqm and minium 3mm thick reinforced with polyster non wove febric ( wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed. (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M&L for 10 mm thick screed bed on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately) complete all as specified & directed

M&L12mm thick PVC teak wood finished wall panelling over & including PVC framing at the spacing c/c n.exc 1mtr both way fixed to wall with Nylon Plugs and steel screws to form a uniform base for fixing of panels with approved adhesive and jointed together with tongue and grove joint complete all as specified and as directed.

S&F Corner and top beads both type concave and convex type of VISTA LEVLOR /LEGSTRONG material 5 to 8 mm thick at corners to form a uniform appearance, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & directed

Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 8mm thick tinted/frausted glass. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening will be measured for payment purpose.)

S&F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

M & L for coloured vetrified tiles of size 600 x 600 x 8-10mm thick as in floor laid over and including 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 10mm cement plaster in CM 1:4 complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed

S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

M & L 16-18 mm thick granite (Z black colour or any other colour approved) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like laid over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding complete all as specified and as directed .

M&L Machine cut kota stone slab flooring 18-20mm thick laid over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position complete all as specified and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid over 25mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path complete all as specified and as directed.

M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed (Note: Colour of chequered tiles shall be approved by Engr-in-Charge or by GE as per site requirement).

S & F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F for RCC manhole covers 75 mm thick medium duty including handles embeded conforming to IS-12592 including demolition of existing UNSV manholes of any type, complete all as specified and as directed.

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty including taking down existing false ceiling with frame complete all as specified and directed.

S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction complete including dismantling of existing false ceiling with frame in any position.

Fabrication & fixing of Modular wardrobe/ cupboard made out of 18-20 mm thick HDHMR boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc. fixed in repairs complete all as specified and as directed.(Design and pattern as approved by GE). (Make : Rajshree or equivalent)

S & F for 18-20mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard fixed in repairs complete all as specified and as dirfected. (Make : Rajshree or equivalent)

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

S&F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.

S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed

Supply only against unservicable Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only against unservicable Stainless steel basket (plain) of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

Supply only against unservicable Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.

S&F in repair Sinks (Double bowl) made of stainsless steel 1mm thick as in kitchen with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 915mmx460mm, double bowl (each bowl size 410mm x 330mm x 160mm), complete all as specified and as directed. (Make : Nirali/Jayna/Diamond)

S & F in repair Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete all as specified and as directed.

M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for RCC 1:1.5:3 nominal mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.

Taking down carefully old unserviceable copper/aluminium point wiring From pvc conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket, light fittings etc and making good the disturbed surface complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl MS box of suitable size for fixing switches/sockets/fan regulator etc , with and including bakelite sheet 3 mm thick of suitable size and making good surface complete all as directed for the following :- (a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

All as per srl item no. 129 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire.

S & F of switch piano, flush type single pole, one way 5 Amp complete all as directed.

S & F of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.

S & F of switch piano, flush type single pole, one way 15 Amp complete all as directed.

S & F of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.

S&F of step type Fan regulator , 120 watts, piano flush type complete all as directed.

S & F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

M&L in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to PVC conduit with and including 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to Geyser point complete all as specified.

S&F LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.

S&F LED mirror light fitting, 12 watt. with and including all electric connections complete all as specified and as directed.

S&F ceiling fans complete with blades, down rods, electronic and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). and depositing the old u/s to MES store yard, complete all as specified and as directed.

S&F in replacement ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.

S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to MES store yard, complete all as specified and as directed.

S&F in Replacement of Modular AC Socket with 25 Amp SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

S&F of Geyser 25 litre capacity vertical type with steel tank and glass inner linen complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geryser and depositing to MES store yard complete all as specifed and as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of isolator 63 Amp, SPN type with over load and short circuit protection complete all as directed.

Supply and fixing in replacement LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply and fixing in replacement of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 25 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Taking down old unserviceable LT U/G cable any size and core complete all as specified.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

Excavation in trenches in loose/soft soil n.exc 1.5 mtr wide and n.exc 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed

M&L earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Taking down of hylem sheet any size with switch/socket/fan regulator complete all as specified and as directed.

Taking down of rusted sheet metal box any size/type complete all as specified and as directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing modular box covered with modular plate (top cover) for mounting modular switches, sockets or fan regulators complete all as specified and as directed.

All as per srl item No. 160 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for One 3 pin socket outlet 5 amps on the same board

All as per srl item No. 160 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one 3pin socket outet point 5 amps on the independent board..

All as per srl item No. 160 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board complete all as directed.

S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.

S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.

S & F Modular Fan regulator step type ,120 watts complete all as directed.

S&F of Modular Metal Flush Box 1/2 module duly embedded in wall in CM 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified & directed

S&F of Modular Metal Flush Box 3 module duly embedded in wall in CM 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified & directed

S&F Modular Metal Flush Box 6/8 module duly embedded in wall in CM 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified & directed

S&F of Modular Metal Flush Box 12 module duly embedded in wall in CM 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F of Modular white cover plate with frame 2 module complete all as specified & directed

S&F of Modular white cover plate with frame 3 module complete all as specified & directed

S&F of Modular white cover plate with frame 6 module complete all as specified & directed

S&F of Modular white cover plate with frame 8 module complete all as specified & directed

S&F of Modular white cover plate with frame 12 module complete all as specified & directed

S & F in replacement of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.

S & F in replacement of Ceiling rose, 3 terminal , pvc/polycabonate, isulated body all as specified and directed.

Supply and fixing 20 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed.

S & F PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable, FRLS, , complete all as specified and as directed.

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections complete all as directed.

Supply and fixing of Flexible LED tubelar light cool/warm white , and making all electric connections complete all as directed.

Supply , Laying and testing cable XLPE Insulated ,screened ,PVC bedded, galvanised steel strip or wire armouded ,electrical power cable (heavy duty) 1100 volts grade with stranded aluminium conductor size 16.0 sqmm mm 4 core, including taking down old unserviceble cable complete all as directed.

Akhil Enterprises

M/s Shubh Enterprises

garnet engineers contractors