REPAIR, POLISHING AND UPHOLSTERY OF SOFA SET ALL TYPE OF OFFRS MD ACCN AND SINGLE ACCN OF WOODEN FURNITURE AT MILITARY STATION JAISALMER UNDER GE (A) JAISALMER

Amount

Bed Hard wooden with Ply Wood Top (FD-246,247 )

M&L for removing of old unserviceable head rest and S&F New head rest of bed hard plywood top made of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak veneer ply, rest all as specified in drg and directed by Engr -in-charge.

All as per item No 1.01 above but foot rest of Bed hard plywood Top, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable long rail and S&F new long rail made out of Ist class teak wood wood without crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable support/Stiffener and S&F new support/stiffener made out of 1st class teak wood without crack and knots rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old unserviceable ply wood from bed hard and S&F new ply wood of size 1800 x 900 x12 mm thick BWR grade of make-National/Kit Ply/Century rest all as specified in drg and directed by Engr -in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of bed hard rest all as directed by Engr -in-charge.

Chair dining cushioned (FD/E6/MAP/10)

M&L for removing of old broken components of chair dining cushioned and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail of seat as specified in drg

Vertical Strips as specified in drg

Back rest as specified in drg

Seat of 12mm commercial ply wood as specified in drg.

M&L for replacement of old unserviceable foam cushion of seat and S&F of new foam cushion of size 450mm x 450mm and 75 mm thick of 32 density of cool foam or equivalent make , duly covered with tapestry cloth as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining cushioned and as directed by Engr-in-Charge.

Peg Table (FD-266, FD-277, FD-384)

M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF board 19 mm thick one side teak face other side white laminated exterior grade (ISI marked) with 4 mm thick teak wood beading around fixed with fevicol and all as specified in drg.

M&L for removing of old unserviceable legs and S & F new leg made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified in drg.

All as per item No 3.02 above, but front & rear top rail, rest all as per drg.

All as per item No 3.02 above, but bottom side rail, rest all as per drg.

M&L for removing of old unserviceable stiffners in between both side of legs and S & F new stiffners 450 mm x 40 mm x 40 mm made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of peg table and as directed by Engr-in-Charge.

Sofa set 5 Seater/4 Seater/3 Seater/2 Seater/1 Seater (FD-373)

M&L for removing of old broken components of Sofa Set and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,planed and fixed with teak wood pinning and fevicol as under:-

Legs as specified in drg

Side rails of Seat/Back as specified in drg

Stiffener of Seat/Back as specified in drg

Front/Rear rails of seat sofa set 3 seater as specified in drg

Front/Rear rails of seat Sofa 1 seater as specified in drg

Top/Bottom rails of back Sofa set 3 seater as specified in drg

Top/Bottom rails of back sofa set 1 seater as specified in drg

M&L for replacement of old unserviceable foam cushion and S&F new foam cushion of size 530mm x 560mm" x 4" thick, 40 density of Cool foam or equivalent make duly covered with tapestry cloth as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified in drg.

M&L for preparation of surfaces byusing putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 5 Seater and as directed by Engr-in-Charge

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 4 Seater and as directed by Engr-in-Charge

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 3 Seater and as directed by Engr-in-Charge

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of sofa set 2 Seater and as directed by Engr-in-Charge

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of sofa chair 1 Seater and as directed by Engr-in-Charge

Sofa set 5 Seater (Delite Hi-Tech)

M&L for replacement of old unserviceable foam cushion and leatherette and S&F new foam cushion of required size, 40 density of Cool foam or equivalent make duly covered with tapestry cloth/Leatherette as approved by GE.

Teapoy Wooden 600 x 450 x 540mm( FD-232, FD-278, FD-382)

M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF board 19 mm thick one side teak face other side white exterior grade (ISI marked) with 4 mm thick teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing of old unserviceable legs and S&F new legs made of 1st class teak wood without crack and knots duly finished/smoothened complete all as specified in drg and as directed.

All as per item No 6.02 above, but front/rear rails, rest all as specified in drg.

All as per item No 6.02 above, but bottom side stiffener, rest all as specified in drg

M&L for removing of old unserviceable stiffners in between both side of legs and S & F new stiffners 570 mm x 50 mm x 20 mm made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of teapoy wooden and as directed by Engr-in-Charge

Table writing FD-275 :

M&L for removing old unserviceable top and S&F new top for table writing made out of 19 mm thick prelaminated MDF board one side teak face other side white exterior grade (ISI marked) with 4mm teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing old unserviceable legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/smoothened complete all as specified in drg.

All as per item No 7.02 above, but front/rear rails, rest all as specified in drg.

All as per item No 7.02 above, but Top/Bottom side rails rest all as specified in drg.

All as per item No 7.02 above, but bottom middle stiffener rest all as specified in drg.

M&L for removing old unserviceable drawers and S&F new drawers complete all as specified in drg.

M&L for removing old unserviceable side purlin and S&F new side purlin all made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked) as specified in drg.

M&L for removing old unserviceable back and S&F new back made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked) complete all as specified in drg.

M&L for removing old unserviceable shelves and S&F new shelves complete made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked)all as specified in drg.

M&L for removing old unserviceable lock and S&F new lock all as specified in drg.

M&L for removing old unserviceable shutters and S&F new shutters complete made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI marked)all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table and as directed

Table centre , Table Centre two Tier ( FD-274)

M&L for removing of old unserviceable top and S&F new top for table centre made out of prelaminated MDF board 19 mm thick one side teak and otherside white exterior grade (ISI marked) with 4 mm thick teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing of old unserviceable top second Tier and S&F new top for second Tier of table centre two tier made out of prelaminated particle board 19 mm one side teak and otherside white exterior grade (ISI marked) with 4 mm thick teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing of old unserviceable front/rear top rails and S&F new front/rear rails made out of 1st class teak wood without crack and knots duly finished/smoothened complete as specified in drg.

All as per item No 8.03 above, but top/bottom side rails, rest all as per drg.

All as per item No 8.03 above, but legs, rest all as per drg.

M&L for removing of old unserviceable stiffners in between both side of legs and S & F new stiffners 890 mm x 50 mm x 20 mm made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table centre and as directed by Engr-in-Charge.

Table Dining 6 Persons (1500x900mmx760mm) FD-273 :

M&L for removing of old unserviceable top and S&F new top of size 1500 x 900 x 19 mm thick made out of prelaminated MDF board one side teak and other side white exterior grade (ISI marked) with 4 mm thick teak wood beading around fexied with fevicol all as specified in drg.

M&L for removing old unserviceable legs and S&F new legs made out of Ist class teak wood without crack and kbnots duly finished/ smoothened complete as specified in drg

All as per item No 9.02 above, but top side rails/support, rest all as per drg.

All as per item No 9.02 above, but front/rear long rails, rest all as per drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table dining 6 person and as directed

Table Dining 8 Persons (1800x900mmx760mm) FD-273 :

M&L for removing of old unserviceable top and S&F new top of size 1800 x 900 x 19 mm thick made out of prelaminated MDF board one side teak other side white exterior grade (ISI marked) with 4 mm thick teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing old unserviceable legs and S&F new legs made out of Ist class teak wood without crack and knots duly finished/ smoothened complete as specified in drg

All as per item No 10.02 above, but top side rails/support, rest all as per drg.

All as per item No 10.02 above, but front/rear rails, rest all as per drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table dining 8 person and as directed by Engr-in-Charge

Table Dressing Ladies with Mirror FD-251

M&L for removing old unserviceable looking mirror and S&F new looking mirror of size 1220 x 380, 5.5 mm thick duly framed made out of teak wood without crack and knots of 25 x 20 mm thick & 6mm thick commercial ply on back of mirror and supported with teak wood batten of size 45 x 40mm all as specified in drawings

M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated MDF board with drawer and sliding channel with glass etc complete all as per drawing (back shall be 12 mm ply)

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to frame of mirror/beading of lower box etc and as directed by Engr-in-Charge

Table Dressing Gents with Mirror FD-230:

M&L for removing old unserviceable broken looking mirror and S&F new looking mirror of size 760 x 380, 5.5 mm thick duly framed made out of Ist class teak wood without crack and knots of size 25 x 20 mm & 6mm thick commercial ply on back and supported with batten 35 x 25mm all as specified in drawing

M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated MDF board with drawer complete all as per drawing (back shall be 12 mm ply)

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to frame of mirror/beading of lower box etc and as directed by Engr-in-Charge

TV trolley FD-E6/MAP/04

M&L for removing old unserviceable side purlin and S&F new side purlin made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI Marked) with self adhesive beading where ever reqd all as specified in drawings

M&L for removing old unserviceable Top/bottom/shelve and S&F new Top/Bottom/Shelve made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI Marked) with self adhesive beading where ever reqd all as specified in drawings

M&L for removing old unserviceable Back and S&F new Back made out of 19mm thick prelaminated MDF board both side teak face exterior grade (ISI Marked) with self adhesive beading where ever reqd all as specified in drawings

M&L for removing old unserviceable glass openable shutter and S&F new glass openable shutter of size 630x655x5.5 mm thick with four Nos of nylon washer and two nos steel hinges Godraj pattern, all as specified in drawings.

M&L for removing of old unserviceable magnetic catcher and S&F new magnetic catcher all as per drg.

M&L for removing of old unserviceable caster wheel and S&F new caster wheel all as per drg.

Stool dressing cusioned (FD-E6/MAP/14

M&L for removing of old broken components of stool dressing cushioned and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Leg as specified in drg.

Front/Rear top rails as specified in drg

Side top rails as specified in drg

Bottom side stiffiner as specified in drg.

Bottom middle stiffiner as specified in drg.

Top of commercial plywood 350mm x 250mm x12 mm thick as specified in drg

M&L for replacement of old unserviceable foam cushion and S&F of new foam cushion of size14" x 10" x 2" thick 32 density of cool foam or equivalent make duly covered with tapestry cloth as specified in drg.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth only of same size and shape as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of stool dressing cushioned and as directed by Engr-in-Charge

Stool dressing CB (FD-282)

M&L for removing of old broken components of stool dressing CB and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Leg as specified in drg.

Front/Rear top rails incl drilling of holes for caning as specified in drg as specified in drg

Side top rails incl drilling of holes for caning as specified in drg as specified in drg

Bottom side stiffiner as specified in drg.

Bottom middle stiffiner as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of stool dressing cushioned and as directed by Engr-in-Charge

Bin Soiled Linen Multipurpose (FD/E6/MAP/09)

M&L for removing of old unserviceable top of Bin Linen multipurpose and S&F new top made out of 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg

M&L for removing of old unserviceable side purlin of Bin Linen multipurpose and S&F new side purlin made out 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Shutter of Bin Linen multipurpose and S&F new Shutter made out 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Drawers of Bin Linen multipurpose and S&F new Drawers made out of 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Bottom/shelves of Bin Linen multipurpose and S&F new Bottom/Shelves made out of 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for Removing of old unserviceable Back support of Bin Linen multipurpose and S&F new Back support made out of 12 mm commercial ply all as specified in drg.

Side Board Small (FD-371)

M&L for removing of old unserviceable top of side board and S&F new top made out of 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg

M&L for removing of old unserviceable side purlin of side board and S&F new side purlin made out 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Shutter of side board and S&F new Shutter made out 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Drawers of side board and S&F new Drawers made out of 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for removing of old unserviceable Bottom/shelves of side board and S&F new Bottom/Shelves made out of 19mm thick prelaminated MDF board both side teak face laminated exterior grade (ISI Marked) with 4mm thick teak wood beading fixed with fevicol around all as specified in drg.

M&L for Removing of old unserviceable Back support of Side Board and S&F new Back support made out of 12 mm commercial ply all as specified in drg.

Hat Stand with Mirror (FD-361, FD-362, FD-233)

M&L for Removing of old/unserviceable Back ply of Hat Stands with Mirror and S&F new back ply with 6mm thick commercial ply all as specified in drg.

M&L for Removing of broken looking mirror of Hat Stand with Mirror and S&F new looking mirror of size 440 x 300mm , 5mm thick duly framed with 20 x 50mm wooden frame all as specified in drg .

M&L for Removing of old/unserviceable Veneer of Hat Stand with Mirror and S&F new 4 mm thick teak veneer ply all as specified in drg.

M&L for Removing of old/unserviceable around's beading of Hat Stand with Mirror and S&F new beading around Hat Stand with Mirror made out of 1st class teak wood without crack and knots of 6 x 35mm size all as specified in drg.

M&L for Removing of old/unserviceable Pegs and S & F copper oxidised steel Pegs 4" size for Hat Stand with mirror all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surfcae and polishing two coat of french polish to Hat Stand with Mirror and as directed by Engr -in-charge.

Chair dining long back (FD-357)

M&L for removing of old broken components of chair Dining Long back and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear portion including leg, back side, cushion & tapestry cloth complete as specified in drg

Stifiner as specified in drg

Front/Side/Rear rail as specified in drg

Cushioned Seat with tapestry cloth as specified in drg

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining long back and as directed by Engr-in-Charge.

Chair Easy Cushioned (FD-358)

M&L for removing of old broken members of chair easy cushioned and S&F new members made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Legs as specified in drg

Seat rails as specified in drg.

Back rails as specified in drg.

Arm with cushion as specified in drg .

M&L for replacement of old unserviceable foam cushion fraom seat and S&F of new foam cushion of size 420mm x 445mm x 75 mm thick, 32 density of Cool foam or equivalent make duly covered with tapestry cloth/Synthetic Leather as approved by GE.

M&L for replacement of old unserviceable foam cushion fraom back and S&F of new foam cushion of size 420mm x 445mm x 50 mm thick, 32 density of Cool foam or equivalent make duly covered with tapestry cloth/Synthetic Leather as approved by GE.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair easy cushioned and as directed by Engr-in-Charge.

Table 900 x 600 x 760 mm with and without drawer FD- 283 & 284

M&L for removing old unserviceable top and S&F new top of size 900 x 600mm made out of 19 mm thick prelaminated MDF board one side teak face other side white laminated exterior grade (ISI marked) with 4mm thick teak wood beading around fixed with fevicol all as specified in drg.

M&L for removing old unserviceable legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified in drg.

All as per item No 21.02 above, but Short rail/bottom side Stiffener, rest all as per drg.

All as per item No 21.02 above, but front/rear long rails/ bottom middle Stiffener , rest all as per drg.

M&L for removing old unserviceable drawers and S&F new drawers complete all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 600 and as directed by Engr-in-Charge.

Chair for table cards (FD-353)

M&L for removing of old broken components of chair for table cards and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail of seat as specified in drg

Back rest as specified in drg

Seat of 12mm commercial ply wood as specified in drg.

M&L for replacement of old unserviceable foam cushion of seat and S&F of new foam cushion of size 450mm x 450mm and 75 mm thick of 32 density of cool foam or equivalent make , duly covered with tapestry cloth as approved by GE.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of chair dining cushioned and as directed by Engr-in-Charge.

Table Card 900 x 900 x 760 mmFD- 352

M&L for removing of old unserviceable MDF board and baize green/ Red cloth and S&F new MDF board 19 mm thick duly covered with baize green/ Red cloth and also covered with teak wood for two front side rail 850 x 50 x 20 mm and two side rails of 900 x 50 x 20 mm of same size all as specified in drg and directed by Engr -in-charge.

M&L for removing old unserviceable legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified in drg.

All as per item No 23.02 above, but Short rail/bottom side Stiffener, rest all as per drg.

All as per item No 23.02 above, but front/rear long rails/ bottom middle Stiffener , rest all as per drg.

M&L for removing old unserviceable drawers and S&F new drawers complete all as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of french polish to old and new surface of table 900 x 600 x 760 and as directed by Engr-in-Charge

S&F 1st class teak Corner of size 100 x 100 x 25mm thick to be fixed with 75mm steel screw between the legs and top rails of Table dining 8 Pers/6 Pres/, etc and as directed by Engr-in-charge

S&F 1st class teak Corner of size 75 x 75 x 25mm thick to be fixed with 60mm steel screw between the legs and rails of chair Dining with cushion, Peg table, Teapoy, Table Centre etc and as directed by Engr-in-charge

Supply and fix knob for drawers and shutters of Table writing, Table 900 x 600 with drawer, Table Dressing Ladies, Table dressing Gents, Bin Linin Multipurpose and Side Board etc. All as specified in drg or as directed by Engr-in-Charge.

Supply and fix FI Clips for Board Notice, Dressing Mirror Gents and Mirror with shelve etc. All as specified in drg or as directed by Engr-in-Charge.

Supply and fix hard rubber rings at the bottom of Legs of chair dining long back,tabble 8/6 person, centre table , sofa set 5/4/3/2 & 1 seater,peg table , teapoy wooden chair dining cushioned, etc

B.S Constructions

PRAFUL ENTERPRISES

SK INDUSTRIES

BHARAT BUILDERS

F.M. KHAN SONS

M/S CHANDER SHEKHAR

Vinayak Distributors