PROVIDING AND LAYING PIPE LINE IN REMAINING STREETS, DEVELOPMENT OF WATER WORKS, REPAIR OF P.C. OHSR AND PROVIDING FUNCTIONAL HOUSEHOLD TAP CONNECTIONS ETC. AT WATER SUPPLY SCHEME NAINEWAL, BLOCK SEHNA, CONSTITUENCY BHADAUR OF DISTRICT BARNALA.

Amount

Repair of OHSR

Repair of Vertical wall Bottom Dome & Pillars. Including Material and Labour complete in all respects.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

c) 150 mm I/d

P/F OHSR Jali Complete in all respects.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Construction of plinth protection C.C. toping around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect as per drawing D-9 & Analysis of Rates A-10-1 to A-10-6 complete in all respects.

OHSR-100000 ltr Capacity outer dia of toe wall = 7.60 m

Repair of Expainsion Joints 150 mm complete in all respects with material

Painting of OHSR pipes including cost of labour & material complete in all respects.

Credit old Sluice Valve

Repair of Pump Chamber

Scraping of White washing of Pump Chamber Complete in all respects.

Inside the Pump Chamber =18.13 Sqm. Outside the Pump Chamber = 88.46 Sqm

White washing 2 coats inside of pump chamber Complete in all respects..

Distempering with dry distemper of approved manufacture One coat on Old distempered work

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting Two or more coats excluding priming coat with synthetic enamel paint in all shades on Wood work, Metallic or plastered, concrete surface to give an even shade.

Painting Two or More coats with synthetic enamel paints in all shades on Old Wood Work or Metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.. (Metalic)

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Metalic)

Supplying & fixing glass panes including special metal sash putty of approved make.Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Providing, Laying fixing & jointing of PVC pipes as per ISI-4985 (ISI marked with the prior approval of Engineer in charge) along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for more than 3 mtr street width including excavation & back filling complete in all respect (CSR item 28.13 - Analysis-14A

PVC pipe 63 mm o/d 6Kg sqcm

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting. CSR item 8.19 in analysis of rates-13

PVC pipe 63 mm o/d

Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications.(Analysis A – 26)

PVC pipe 63 mm o/d

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method including excavation , stringing and jointing of pipe .(CSR item 28.71)

upto 160mm complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) (CSR item No. 28.27 (A))

(c) 150 mm I/d

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.9m x 0.9m (CSR item 28.66) (b)

Connection with existing PVC/AC pipe (All Dia of Pipe) with PVC Pipe including cost of PVC tee /PVC saddle piece/D Joints and earth work in excavation & back filling complete in all respect as per analysis A-20

Providing water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete connection as per site condition.

Repair of water connection to house hold upto wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete connection as per site condition.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kg cm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Development of water works site

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-5.

12.5 mm thick cement plaster 1:5 on wall for corner pillar 3.69 Sqm. @ 3 No.=11.07

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shadeats

For Corner pillar= 3.69 Sqm. @ 3 No For Gate pillar

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint for Steel gate.

Painting & Writing MS Sign Board as per standard size of DWSS as per analysis A-24

O&M for 3 Month

Provision of Bleaching power solution/sodium Hypo solution complete in all respects