Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹42.7 L+₹4.0 L (10.3%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹46.2 L+₹7.5 L (19.2%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
2 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD PUNE-411003
REPAIRS / MAINTENANCE TO JOINERY, KITCHEN UTILITY AND ALLIED WORKS IN MD ACCN IN ZONE A AREA OF AGE B/R-I (C) UNDER GE (CENTRAL) KHADKI.
2023_MES_604510_1
8849/E8 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
ZONE A area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹90,000
Yes
26 Oct 2023
20 Jun 2023
4 Sept 2023
20 Jun 2023
2 Sept 2023
21 Aug 2023
20 Jun 2023 - 30 Jun 2023
Amount
NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all. (iv) Contractor shall make good any damage made to the existing services like electrical and mechanical or any kind of services and cost for the same is deemed to be included in rate quoted in concerned schedule item.
Supply and fix stainless steel kitchen basket for storage of plates, cups, bottle etc, made out of stainless steel of grade SS 304 not less than 6 to 8 Kg each using square hollow tubes of size 12mm x 12mm x 1.25mm thick for framework as required and soild round bars / 26 gauge thick sheet to make desired pattern, suitable for sliding under kitchen platform on pair of channels, including fixing with steel screw, fixed in repair, complete all as specified and as directed.
Supply and fix telescopy chennels, powder coated with ball bearings, suitable for sliding stainless steel kitchen basket 60cm long standard width; fixed over 2nd class hard wood rectangular fillet sectional area exc 3 Sqcm & n. exc 6 Sqcm, clean swan secured with screw and the fillet fixed in repair on cuddapah stones with screw complete all as specified and as directed.
Material and labour in repair 18mm thick marine plywood, grade BWP type BB with both side 0.9mm thick decorative choice laminate type 1 of surface finish, colour and pattern as approved, fixed with adhesive as per manufacturer's instructions, fixed with screw to timber frame work including 1st class HW lippling all around the shutter/edges and polishing etc complete all as specifiedd and as directed.
Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.
Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.
Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed.
Taking down shutter of any description but exceeding 2 Sqm each complete all as specified and as directed.
Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.
Supply and fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specifed and as directed.
Supply and fix first class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specifed and as directed.
Material and labour for providing cement concrete type C-0 (1:3:6) (using 12.5mm graded aggregate) as in pressed steel door frame (backfill), complete all as specified and as directed.
Material and labour for providing cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fast, complete all as specified and as directed.
Supply and fix for 35mm thick second class hard wood factory made plain, framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed.
Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.
Supply and fix for 30mm thick first class hardwood glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.
Supply and fix factory made solid PVC door frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.
Supply and fix 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.
Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.
Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.complete all as directed.
Supply and fix in repair 140mm size floor door stopper of aluminium alloy body and tongue, inodised, with hard drawn steel spring, fixed in floor for aluminium/wooden door, complete all as specified and as directed.
Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and as directed.
Supply and fix in repair aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and as directed.
Supply and fix aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.
Supply and fix in repair aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specifed and as directed.
Supply and fix in repair extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specifed and as directed.
Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fix in repair, powder coated door seal fixed with screws to any type of shutter, complete all as specified and as direccted.
Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightning with new screws of by aluminium angle, cleat and other connected work complete all as specifed and as directed
Supply and fix factory made box type steel window composite type with double rebate pressed steel frame 80mmx60mm (peripheral) and 80mmx75mm (intermediate members) including grill using 10sqmm bar, made out of cold rolled 1.25mm thick sheet having steel window/ventilators double shutter of MS tubular section of size 50mmx20mmx1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for glazed and wire shutter handle of 100mm MS hollow tubular section as beading for wire and putty for glazing shutter handle of 100mm size made of z section 01 no, MS stove enamelled black tower bolt of size 120mm, 02 nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long hold fast 04 nos each window including filling with PCC (1:3:6) complete all as specified and as directed.
Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.
Supply and fix plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed.
Supply and fix in repair harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.
Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and a directed.
Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nailse around the partical board etc including taking down old particle board of any description complete all as specified and as directed.
Supply and fix 40mm Width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
Supply and fix in repair 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as direccted.
Supply and fix magnetic latch of approved pattern and shape fixed with screws on wooden surfaces all as specified and as directed.
Supply and fix butt hinges 75mm in size, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as direccted.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed.
Supply and fix for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290,Gde-E-165 etc complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.
Material and labour Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specifed and as directed.
Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specifed and as directed.
Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely
Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely
Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely.
Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specifed and as directed. NOTE :- water proofing compound shall be measured & paid separetely
Supply only liquid water proofing compound etc complete all as specified and as directed.
Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specifed and as directed.
Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specifed and as directed.
Material and labour for rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia,fins,parapet etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia,fins,parapet etc and applying three coats of white wash complete all as specifed and as directed.
Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper upto height 10 mtr etc complete all as specified and as directed.
Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Description all as per ser item No 58 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm / 300mm x 600mm x 7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specifed and as directed.
Material and labour for granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.
Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.
Supply and fix in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specifed and as directed.
Supply and fix in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.
Supply and fix in repair PVC floor trap/nahani trap 75mm complete all as specifed and as directed.
Supply and fix in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specifed and as directed.
Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as specifed and as directed.
Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specifed and as directed.
Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specifed and as directed.
Material and labour for disconnecting of existing PVC tank of capacity Exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.
Material and labour for disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specifed and directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.
Supply and Fix Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm (23" approx) white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per Prayag Cat Part No 4055 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.
Material and labour for vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern and flush pipe) all as per Prayag cat Part No.4018 or 4019 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified.
Supply and fix in repairs for plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specifed and as directed.
Supply and fix vitreous china urinal half stall size 345x320x560 mm wall mounted (minimum), with Waste coupling of CP, (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing all as per Prayag Cat No 4998 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC valveless, syphonic action type, Smart flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per Prayag cat Part No.501 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified and directed..
Supply and fix in repair 32 mm bore and 800mm long PVC waste pipe suitable for WHB, Urinals etc all as per Prayag Cat No 3271 or technocommercially equivalent make complete all as specified and directed.
Supply and fix in repairs PVC symphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specifed and as directed.
Supply and fix in repairs for PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specifed and as directed.
Supply and fix in repair 15mm bore stop valve, chromium plated fancy type screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8326/8328 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix angle cock, 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down, screwed both ends for iron pipe or for brass ferrule all as per Prayag Cat No 8310 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 8306 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 600mm long all as per Prayag Cat No 324-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 900mm long all as per Prayag Cat No 326-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as per Prayag Cat No 113 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.
Supply and fix in repair 2 in 1 health Faucet (1.00 metre braided tube) with ABS wall hook all as per Prayag Cat Part No.BEA-100-S or techno commercially equivalent makes specified in PS, with 1 meter SS Braided connection pipe complete all as specified and as directed.
Supply and fix in repair pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.
Supply and fix in repair center hole basin mixer chromium plated Hot and cold with copper pipe complete all as specife and as directed. MAKE :- Prayag Cat Part No 7250 Viva series or techno commercially equivalent makes specified in PS
Supply and fix in repair CP Wall mixer telephonic with crutch with (Provision for hand shower), with complete accessories all as per Cat Part No PIS-70H of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.
Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500x125mm with chromium plated brass bracket all as per Cat Part No BEA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.
Supply and fix in repair vitreous china one piece wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and as directed. MAKE :- Prayag Cat Part No 4645 or techno commercially equivalent makes specified in PS
Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.
Supply and fix in repair rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.
Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside defence land complete all as specifed and as directed.
Material and labour for filling broken brick bats not exc 63mm as in sunken portion including grouting in CM (1:6) complete all as specified and directed.
Material and labour for water proofing treatment to sunken floor with the following course of treatment/ specification: (a) First layer of slurry of cement at the rate of 0.488 kg/sqm mixed with acrylic based polymer, modified cementitous composite compound at the rate 0.253 kg/sqm. This layer will be allowed to air cure for 04 hours. (b) Second layer of slurry of cement at the rate of 0.242 cementitous composite compound at the rate of 0.126 Kg/sqm. This layer will be allowed to air cure for 04 hours followed with water curing for 48 hours. (c) The rate include aeration of surface, treatment and sealing of all joints, corners, junctions of pipe and masonry within polymer mixed slurry. (d) This statement shall be provided after provision of cement plaster mixed with WPC and synthetic fibres while concrete is still green. (e) 200 micron thick polythene film pasted with the help of adhesive shall be provided over above treatment.
Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in flooring finishing the cement finished rough complete all as specified and as directed.
Material and labour 50mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) finished even & smooth using extra cement complete all as specified and as directed.
Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid vertical/Horizontal and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
DARSHAN ENTERPRISES
Vastushilpa Contrustion
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .