Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC AO 144 GF SECTOR 48 C MOHALI | FATEHGARH SAHIB | PUNJAB | 140405 | ₹25.9 L | L1 | Accepted-AOC Quoted Lowest rate |
| 2 | L2₹29.6 L+₹3.7 L (14.3%)Rejected-AOC | ₹29.6 L+₹3.7 L (14.3%) | L2 | Rejected-AOC Quoted Higher rate |
| 3 | L3₹31.7 L+₹5.8 L (22.6%)Rejected-AOC NEAR VIJAY DENTAL CLINIC NABHA GATE DISTT PATIALA | PATIALA | PUNJAB | 140401 | ₹31.7 L+₹5.8 L (22.6%) | L3 | Rejected-AOC Quoted Higher rate |
| 4 | L4₹33.0 L+₹7.1 L (27.6%)Rejected-AOC 492 PHASE 6 MOHALI | MOHALI | ₹33.0 L+₹7.1 L (27.6%) | L4 | Rejected-AOC Quoted Higher rate |
Tender Value
₹34.5 L
EMD Value
₹68,927
Closing Date
11 Jun 2026, 12:00 pmClosed
Executive Engineer Provincial Division Chandigarh
Room No. 315-16, 17-Bays Building, Sector-17, Chandigarh
REPAIR/RENOVATION OF THIRD FLOOR IN THE OFFICE OF CHIEF ELECTION COMMISSION SCO NO. 29-32, SECTOR 17-E, CHANDIGARH.
2026_CEPW_169080_1
18 Dated 29.05.2026
Open Tender
Civil Works
Percentage
45 days
Sector-17, Chandigarh
Please refer Tender Documents
3 documents required · 3 mandatory
₹5,000
₹68,927
Yes
23 Jul 2026
1 Jun 2026
11 Jun 2026
1 Jun 2026
11 Jun 2026
1 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. (CSR 8.44) | 751.05 | Sqm | 48.46 | ₹36,395.88 |
| 2 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below.. (CSR 8.26) (a) | 16 | Each | 234.93 | ₹3,758.88 |
| 3 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick. (CSR 17.27) (a) (iv) | 25.09 | Sqm | 2,430.42 | ₹60,979.24 |
| 4 | Providing and fixing decorative ply wood, 4mm thick three ply teak faced on one side in partition including fixing.(CSR 17.40) | 50.19 | Sqm | 654.22 | ₹32,835.3 |
| 5 | Melamine polish two or more coats to give required finish including one coat of wood filler. (CSR 16.66) | 50.19 | Sft | 993.45 | ₹49,861.26 |
| 6 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. (B) Single Rebate (60mm x 100mm) (CSR 17.15) (ii) (B) | 76.22 | Rmt | 891.26 | ₹67,931.84 |
| 7 | Dismantling glazed tiles (to be carefully removed). (CSR 8.35) | 486.44 | Sqm | 133.79 | ₹65,080.81 |
| 8 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make an ideal choice for high traffic zones.) (a) Size 600x600 mm. (CSR 14.115) (a) | 486.44 | Sqm | 1,497.02 | ₹7,28,210.41 |
| 9 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.(CSR 14.114) | 486.44 | Sqm | -387.69 | - |
| 10 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.(CSR 14.117) | 486.44 | Sqm | 382.42 | ₹1,86,024.38 |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
BOQ_344292.xls
BOQ • 0.33 MB
SBD3.pdf
Tender Documents • 6.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .