Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC OLD MISSAMARI PO PS MISSAMARI DISTT SONITPUR ASSAM PIN 784506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹39.4 L+₹35,911.65 (0.92%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹40.7 L+₹1.6 L (4.18%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
PROVN OF EIGHT SINGLE LIVING JCOs ACCN AT HATTIGOR MIL STN UNDER GE RANGIA
2023_MES_573723_1
CWE/TEZ(R)/T-45 of 22-23
Open Tender
Civil Works
Item Rate
270 days
GE Rangia
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Rangia
₹84,000
Yes
13 Feb 2023
7 Jan 2023
6 Feb 2023
7 Jan 2023
4 Feb 2023
21 Jan 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil
Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n,.exc 1.5m in depth and getting out in soft/loose soil
Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in soft/loose soil.
Removal of excavated material exceeding 250m but n.exc 500m and deposited where directed at a level n.exc 1.5m above the starting point.
M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete.
M&L RCC (Design Mix) M-25 (20 mm graded Agg) as in footings, plinth beams; bases for columns, etc complete all as specified & directed.
M&L RCC (Design Mix) M-25, 1:2:4 (20 mm graded Agg) as in lintel over 1.5m span complte all as specified & directed.
M&L RCC (Design Mix) M-25, 1:2:4 (20 mm graded Agg) as in chajjas.
M&L for RCC (Design Mix) M-25, 1:2:4 (20 mm graded Agg) as in columns ,pillars,piers,posts and struts etc all as specified and directed by the Eng-in-charge.
Formwork to sides and soffits of concrete foundations,plinth beams and similar work for fair finished flat surfaces.
Formwork to sides & soffits of concrete floor or roof beams,lintels etc.for fair finished flat surfaces.
Formwork to chajjas and similar items including edges as in fair finished flat surfaces of conc.
Use and waste of form work to sides of pillars, posts, struts, piers , columns and stanchions for rough finished surfaces of concrete complete all as specified and directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
Ditto --all as per item No. 14 above but 5mm dia and over upto and including 10mm dia in stirrups.
M&L brick work with sub class ‘B’ class straight or curved or plan exc 6 m mean radius built in cm (1:6)
M&L brick work with sub class ‘B’ class straight or curved or plan exc 6 m mean radius built in cm (1:4)
Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4
M&L rendering 15 mm thick in cement (1:4) finished even and smooth without using extra cement on brick surface on external surface with WPC @ 3% by weight of cement. (WPC shall be measured and paid seperately).
Supply only integral water proofing compound.
M&L rendering 10mm thick on other than fair faces of brick work or concrete block surface in cement mortar 1:6, surface to be finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.
M&L preparing plastered surfaces and applying two coats of cement based paint over a coat of primar on external surfaces of walls.
M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion over a coat of primer on surfaces of walls complete all as per specified and as directed by Engineer-in-charge. .
M&L sand filling under floors or in foundation including watering and consolidation.
M&L hard core of broken bricks gauge n.exc 63 mm broken stone spread & levelled in layer n.exc 15 cm thick watered & rammed to a true surface.
M&L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing incl finishing the surfaces even and smooth without using extra cement.
50 mm thick Cement concrete type B 2, 1:2:4 (using 20 mm graded stone aggregate) in sub base of flooring/ hard standing/
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in Skirting etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick CM 1:4 on as on vertival wall surface.
Coloured Glazed ceramic tiles 350 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4.
M&L for Chequered Pre- Polished cement concrete tiles 300x300x25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry laid over and incl 15 mm thick of screed bed or bedding layer cement mortar 1:6, for laying floor finishes.
Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing
S&F 100 mm long Stainless steel butt hinges medium weight clod rolled and fixed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section
S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F Pressed steel frames (125x60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, and inside filled with PCC 1:3:6 (12.5mm graded stone aggregate) etc., complete all as specified in SSR Pt-I,
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.
M&L for 35 mm thick Factory made second class hardwood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc. (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of member as specified in SSR part I section & clause 8.24 (a), complete all as per specified and as directed by Engineer-in-charge.
M&L for Preparation of new / previously untreated wood or wood base surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of pink primer.
M&L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-Charge.
S&F factory fabricated steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars , dovetailed or welded with one shop coat of priming paint
Ditto all as per item No. 42 above but without glazing bars.
S&F MS framed work as grills, gratings etc.. with ends of bars shouldered or riveted, framed guard bars and similar work conforming to Fe -290 Gde E-195.
S&F factory fabricated steel ventilators with top hung shutter including hinges, steel peg stay with one shop coat of priming paint complete.
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane.
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S&F, double legged door stopper of size 150mm of aluminium alloy with rubber complete all as specified and as directed.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as per specified and as directed by Engineer-in-charge.
M&L for second class soft wood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails exceeding 03 sqcm and not exceeding 06 sqcm complete all as specified and as directed.
S&F of Gl power coated snap grid frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 450 mm centre to centre and suspended from GI wire of 3mm dia and all as specified and directed
S&F 4mm thick Non asbestos fibre cement building board / E-board fixed to GI frame (snapgrid) of standard section as per manufacturers instructions fixed in ceiling flat or sloped complete all as specified.
S&F Prepainted galvalume aluminium zince coating GI based orrugated/ Semi-corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminium zince coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F MS steel work in tubular trusses including special shaped washers etc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint.
S&F Mild steel , flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, wind ties, clamps and similar small articles etc
M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard standing/pavings/plinth protections, finished even and smooth using extra cement.
M&L for Glass dividing strips, 3 mm thick 38mm wide as in floors
S&F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
Cutting chases, pinning in, in brick walls and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills sunshades, shelves etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth all as spd and directed
S&F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.
S&F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F, cast copper alloy, chromium plated towel rail, 600mm long complete.
S & F of soap dish,stainless steel size fixed to plugs with chromium palted brass screws of standard.
S&F in repair 125mm size brass chromium plated shower rose complete.
S & F in repairs 15 mm bore Stop valves, fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F PVC Connections 15 mm size with PTMP nuts of length 450mm
S&F waste coupling brass, chromium plated with long shank, half thread, 32mm dia, for WHB/urinal etc. complete.
M&L 100mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard standing/pavings, in alternate bays, finished even and smooth using extra cement.
S&F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.
S&F 75 mm dia PVC (SWR) pipes single cocketed , in any length , laid in trenches or in floors
Ditto all as per item above but 110mm bore dia
S&F PVC (SWR) junction single,(single T ) equal or unequal of any radius 110 mm, laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110 mm,laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75 mm,laid in trenches or in floors complete all as specified and as directed.
S & Fixed chromium plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long easy Flex tube in chrome finish complete all as directed
S&F PVC Cowl 110 mm bore.
S&F 2 in one bib tap (CP) 15 mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repair vitreous china wash down water closet pan 580 x 440 mm (Pedestal pattern) white complete including seat cover, flush pipe including all joints, complete all as per specified and as directed by Engineer-in-charge.
S&F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) with pedestal including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.
PVC valve less, syphonic action type flushing cistern (10 ltrs capacity), low level, white with inlet ball valve float and handle including brackets
S&F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe.
S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position incl 25 mm PVC float valve all as specified and directedin SSR Pt I
Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc.complete for 10 users.(Drg No- CESZ/2019/TD-115, Sheet 1/4 to 4/4)
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars as specified of 150 mm dia (internal) bore of pipes
M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.
Soakage wells. Exc in ordinary soil foundation in PCC 1:3:6 wells of honey combed in concrete including intercepting chamber screen chamber brick work in CM RCC cover slab RR masonry/filling with brick bats, complete of size 1.8 M dia x 3.00M deep. (Drg No- CESZ/TD/502, Sheet 1/1)
M&L for Precast cement concrete 1:3:6 type C1 (using 20 mm graded stone Aggregate) in landing cover slab (for manhole etc) shelves and similar articles with plain faces and set in cement mortar 1:4
M&L for Cement concrete in surface chnnels and drains 1:3:6 type C2 (40 mm graded aggregate) as in bed/side of drain, complete all as specifed and as directed.
M&L for 40 mm thick Damp Proof Course in cement concrete 1:2, Type B-0 to horizontal or vertyical surfaces including necessary formwork
S & F Stainless Steel curtain rods 32 mm dia with bracket and ends etc complete all as specified and directed.
M&L for anti-termite treatement treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as per specified and as directed by Engineer-in-charge.
M&L for anti termite treatment to the soil alongwith external perimeter of bldg at the rate of 2.25 ltr of emulsion per metre of the perimetre wall complete all as per specified and as directed by Engineer-in-charge.
M&L for anti termite treatement of soil of the top surface of filled earth at rate of 5 litre of emulsion per square metre of surface area complete all as per specified and as directed by Engineer-in-charge.
S&F fancy type brass chromium plated with long shank and cup (concealed type) 15mm bore stop valves, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated single core multi stranded copper conductor cable drawn into and incl PVC casing caping sleeves and caps of adequate width and length with all accessories and fittings like bends, elbow crosses and PVC rectangular block with 3mm thick plastic laminated sheet cover as directed for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded copper conductor cable as earth continuity conductor and connected to earth dolly complete of followings :-
(a) One light point controlled by one switch complete.
(b) One ceiling fan/Exhaust point controlled by one switch complete.
(c) One 3 pin socket combination 5 Amps on independent board.
(d) One 3 pin socket 5 amps on the same board.
S & F socket outlet 2 in1,3 Pin, 5 AMPs flush type complete all as specified and as directed
S & F switch socket combination 2 in 1, 3Pin 5 Amps flush type complete.
S & F switch piano flush type single pole 5 Amps 230 volts complete.
S & F ceiling rose three terminals PVC/Polycarbonate, isolated body complete.
Supply and fix LED tube light fittings 1 x 20 Watt,220 V, AC decorative box type with driver holder including LED tube rod connecting up with three core flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and as directed by Engineer-in-charge.
Supply and fix lamp holder, PVC/ Polycarbonate type complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted MCB DB SPN, 240 Volts 12 way with suitable bus bar double door complete all as specified.
Supply and fixing, 240 volt , 10 KA, MCB SPN, 32 Amps capacity complete all as specified.
Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified.
Supply and Fixing wall security light fittings of Cap 18 W suitable for Next generation LED light with pressure die-cast housing with prismatic polycarbonate diffuser with IP 66 and impact resistance of IK08. 4 kv inbuilt surge protection with top opening driver cover for easy maintenance complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete.
Supply and fix exhaust fan, steel body AC single phase 230 volt of size 300 mm sweep with blades, and frame and louvers complete all as specified.
S&F street light bracket made out of 25 mm GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair or MS flat iron 40mm x 5mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for building wall including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete .
M/L for earthing with galvanized steel earth plate 60cm X 60cm X 6 mm thick, buried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with the top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth plate surrounded by packed layers of coal dust and common salt 15 cm thick all around top and bottom all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including necessary excavation and earth work PCC (1: 3:6) type C1 earth pit, cast iron pit cover, funnel with water pipe 20mm dia medium grade,1.5mtr long and 15mm bore light grade from earth plate to test point or main switch/DB as protection pipe and testing on completion including excavation earth work and disposal of surplus soils complete.
Supply and laying under ground XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified.
Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed.
M&L brick sub class 'B' old size, well burnt, laid flat with width equal to the length of brick laid dry on sand for protection of undeground cable all as specified & directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation of pole etc and getting out in soft/loose soil complete all as specified and directed.
Removing excavated material from site to a distance not exc 50 mtr away and depositing where directed not exc 1.5 mtr from the starting point all as specified and directed.
Returning filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil after the pipes/fittings are laid/fixed jointed and tested complete.
M&L for GI pipe light grade 40 mm dia fixed to wall, pole or laid in floor complete all as specified and directed.
Excavation in trenches not exceeding 1.50 meter wide and not exceeding 1.50 meter in depth for laying pipe etc and getting out in soft/loose soil complete all as specified and directed.
Returning filling in, excavated earth including spreading leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil after the pipes fittings are laid/fixed jointed and tested complete all as specified and directed.
Removing excavated surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.
Supply and fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches/fixed on walls all as specified and directed of following sizes :-
(a) 50 mm dia.
(b) 25 mm dia.
(c) 20 mm dia.
Supply and fixing PP-R gate valves (brass insert) as per requirement of the site of following sizes :-
(a) 50 mm dia.
(b) 25 mm dia
M&L for Construction of valve pit of internal size 60 cm x 60 cm x 60 cm with one brick thick brick masonary wall in cement mortal (1:4) PCC foundation 15 cm thick (1:4:8) type D-2 with 15 cm offsets, PCC copping 5 cm thick (1:2:4) type B-1, plastering 15 mm thick in cement mortar (1:4), 40 x 40 x 6 mm angle iron frame and 3 mm thick MS sheet cover with locking arrangement including painting to steel surfaces with two coats of synthetic arrangement including painting to steel surfaces with two coats os synthetic enamel paint over a coat of red oxide primer and necessary excavation and earth work complete all as specified and as directed by Engr-in-charge.
Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.
M/S SWMKHWR ENTERPRISE
M/S SITAL BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .