Supply, installation, testing and commission of 04 No. Gearless passenger Electrical Traction Elevators Block-A and B Head office building at Sinchai Bhawan, Sector-5, Panchkula.

Amount

Supply, erection, testing and commissioning of 8 passengers (B,G,1,2,3,4&5) Electrical Traction Elevator Room less , Gearless with Speed of 1.50 Meter./ Second serving 7 Stops & 7 Opening with the following Technical Specification and as per latest IS Specification. (I) Make of Lift:-MITSUBISHI / SCHINDLER /ORBIS (II) Type & capacity : Passenger Elevator App. 544 Kg. 8 person (III) Speed mps : 1.5 Meter per second (IV) Travelling (max) in Meters : Aprrox. 25 Meters (V) Serving : 7 stops, 7 opening all opening on same side) (VI) Power Supply Three phase : 415 V, 50 Hz AC supply & single phase 230 V, AC 50 Hz (VII) Control : Duplex full collective control with or without attendant. (VIII) Operation : Automatic (IX ) Motor : Permanent Magnet Synchronous Electric Traction Gearless Motor to be hoisted on guide rail within the elevator hoist way (X) Location of Motor : Motor to be hoisted above the rail within the elevator hoist way. (XI) Type of Drive : A. C . Variable Voltage Variable frequency with 16 Bit Microprocessor (XII) Car Size : Min. 1100 mm x 1300 mm or as per manufacturer design. (XIII) Hoist way available : 1850 mm x 1750 mm (XIV) Car Enclosure : Bright Annealed Scratch Resistance Stainless Steel Panel. (XV) False Ceiling : Stainless steel false ceiling in hair line finish (XVI) Car Panel : Stainless steel scratch free) Hair line finish (XVII) Flooring : Granite flooring on heavy duty MS Platform (XVIII) Clear Opening of door : 800 mm wide x 2000 mm high or as per design (XIX) Door Operation : Automatic DC/AC with adjustable Door Opening and closing timings with center opening sliding door (XX) Door Frame : Stainless steel in hair line finish/Scratch resistant frame finish (XXI) Other Features: (XXII) Battery operated intercom, emergency alarm and emergency light with maintenance free rechargeable battery. (XXIII) Adjustable guide shoes.(Ensures good ride comfort) XXIV Digital direction & position indicator in Car & at all Landings. XXV Integral full height car opening panel with luminous combined with direction arrows, overload warning indicator and services cabinet XXVI Hands free press and speak intercom with EPABX for three way communication. XXVII Automatic rescue device with Manual rescue Lever (to rescue the Passenger in case of emergency) the device will bring the elevators to the nearest floor and open the door automatically in Case of power / phase failure. XXVIII Full height infrared safety curtain( Highly sensitive safety device for safe entrance & exit of the Passenger into the Car & automatic floor announcer. XXIX Diffused lighting in car. XXX Cross flow fans=2 Nos. each lift XXXI Looking mirror in side of lift car. XXXII Face plate Finish stainless steel in hair line. XXXIII Face plate :Rectangular. XXXIV A three feet high railing shall be provided on car top XXXV The motor shall be high starting torque and low starting current and shall be arranged for self lubrication. XXXVI Proper weight screen shall be provided at the hoist way. XXXVII Fire retardant compound coated traveling cable shall be used. XXXVIII 2 Phase Device Fire Man Drive & Fireman switch at ground floor XXXIX Micro Movements L.E.D. based Buttons . XL Load Weighing device with overload bypass feature.(Audio Visual over load indicator in the car) XLI Steel items such as Door Frames Sill Angles, Fascia Plates, Spring Buffers.(SS Scratch Resistant) XLII Braille fixtures, Lift announcement system, Pit ladder, Hand rail , Pressure sensing device & Additional Car Gate Lock . XLIII Three Side Hand Rails in Stainless Steel Finish XLIV System Capable of withstanding +10% to –10% Variation in Supply Voltage Fluctuations. ( C.V.T should be provided for Protection of lift against Single phase, Low voltage & over voltage) XLV Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel XLVI Fire Rated Landing Doors for a Period of One Hour Only. XLVII The whole machinery shall be mounted on appropriate anti vibration supports to minimize voice and vibration. XLVIII A handrail not less than 0.60Meter long and 1.0 Meter. Above floor level shall be fixed adjacent to the control panel.. XLIX The time of automatically closing door shall be minimum 5 seconds and the closing speed shall not exceed 0.25Meter./ Seconds L Over speed governor ( Electro-mechanical device that prevents free fall in case the lift is travelling at speed more than 10% of the rated speed in downward direction. LI All other required features relates the operation of lift by the Handicapts & Blind persons as per instruction of lift inspector

Supply, erection, testing and commissioning of 8 passengers(B,G,1,2,3,4,5&6) Electrical Traction Elevator Room less , Gearless with Speed of 1.50 Meter./ Second serving 8 Stops & 8 Opening with the following Technical Specification and as per latest IS Specification. (I) Make of Lift :- OTIS / KONE / MITSUBISHI / SCHINDLER/ORBIS (II) Type & capacity : Passenger Elevator App. 544 Kg. 8 person (III) Speed mps : 1.5 Meter per second (IV) Travelling (max) in Meters: Aprrox. 25 Meters (V) Serving : 8 stops, 8 opening all opening on same side) (VI) Power Supply Three phase : 415 V, 50 Hz AC supply & single phase 230 V, AC 50 Hz (VII) Control : Duplex full collective control with or without attendant. (VIII) Operation : Automatic (IX ) Motor : Permanent Magnet Synchronous Electric Traction Gearless Motor to be hoisted on guide rail within the elevator hoist way (X) Location of Motor : Motor to be hoisted above the rail within the elevator hoist way. (XI) Type of Drive : A. C . Variable Voltage Variable frequency with 16 Bit Microprocessor (XII) Car Size : Min. 1100 mm x 1300 mm or as per manufacturer design. (XIII) Hoist way available : 1850 mm x 1750 mm (XIV) Car Enclosure : Bright Annealed Scratch Resistance Stainless Steel Panel. (XV) False Ceiling : Stainless steel false ceiling in hair line finish (XVI) Car Panel : Stainless steel scratch free) Hair line finish (XVII) Flooring : Granite flooring on heavy duty MS Platform (XVIII) Clear Opening of door : 800 mm wide x 2000 mm high or as per design (XIX) Door Operation : Automatic DC/AC with adjustable Door Opening and closing timings with center opening sliding door (XX) Door Frame : Stainless steel in hair line finish/Scratch resistant frame finish (XXI) Other Features: (XXII) Battery operated intercom, emergency alarm and emergency light with maintenance free rechargeable battery. (XXIII) Adjustable guide shoes.(Ensures good ride comfort) XXIV Digital direction & position indicator in Car & at all Landings. XXV Integral full height car opening panel with luminous combined with direction arrows, overload warning indicator and services cabinet XXVI Hands free press and speak intercom with EPABX for three way communication. XXVII Automatic rescue device with Manual rescue Lever (to rescue the Passenger in case of emergency) the device will bring the elevators to the nearest floor and open the door automatically in Case of power / phase failure XXVIII Full height infrared safety curtain( Highly sensitive safety device for safe entrance & exit of the Passenger into the Car & automatic floor announcer. XXIX Diffused lighting in car. XXX Cross flow fans=2 Nos. each lift XXXI Looking mirror in side of lift car. XXXII Face plate Finish : stainless steel in hair line. XXXIII Face plate : Rectangular. XXXIV A three feet high railing shall be provided on car top XXXV The motor shall be high starting torque and low starting current and shall be arranged for self lubrication. XXXVI Proper weight screen shall be provided at the hoist way. XXXVII Fire retardant compound coated traveling cable shall be used. XXXVIII 2 Phase Device Fire Man Drive & Fireman switch at ground floor XXXIX Micro Movements L.E.D. based Buttons . XL Load Weighing device with overload bypass feature.(Audio Visual over load indicator in the car) XLI Steel items such as Door Frames Sill Angles, Fascia Plates, Spring Buffers.(SS Scratch Resistant) XLII Braille fixtures, Lift announcement system, Pit ladder, Hand rail, Pressure sensing device & Additional Car Gate Lock . XLIII Three Side Hand Rails in Stainless Steel Finish XLIV System Capable of withstanding +10% to –10% Variation in Supply Voltage Fluctuations. ( C.V.T should be provided for Protection of lift against Single phase, Low voltage & over voltage) XLV Car Platform constructed out of Cold Rolled Grain Oriented Formed Sheets of Steel XLVI Fire Rated Landing Doors for a Period of One Hour Only. XLVII The whole machinery shall be mounted on appropriate anti vibration supports to minimize voice and vibration. XLVIII A handrail not less than 0.60Meter long and 1.0 Meter. Above floor level shall be fixed adjacent to the control panel.. XLIX The time of automatically closing door shall be minimum 5 seconds and the closing speed shall not exceed 0.25Meter./ Seconds L Over speed governor ( Electro-mechanical device that prevents free fall in case the lift is travelling at speed more than 10% of the rated speed in downward direction. LI All other required features relates the operation of lift by the Handicapts & Blind persons as per instruction of lift inspector

Credit of old existing lift components for (7 stops lifts) (-)

Credit of old existing lift components for (8 stops lifts) (-)

ORBIS Elevator Co. Ltd.