SPECIAL REPAIRS TO BLDG NO P-21 SERVANT QTRS BLOCK OF 6 QTRS (5.5) FOR MARRIED OFFRS SERVANT QTR IN RA AND 02 X SINGLE DOME SHADOWLESS LED OPERATION THEATRE LIGHT FOR MH PULGAON AT CAD PULGAON

Amount

Taking down existing water proofing treatment incl brick tiles/padding etc complete of any description from RCC roof slab by scrapping by means of MS scrapper patty or by any suitable tools until the concrete surface of the slab visible and removal of rubbish off the premises as directed to a distance not exc 100 mtr complete all as specified and as directed.

M&L for 25mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) laid on roof slab finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer's instructions laid over roof slab finished even and smooth without using extra cement whilst the concrete is still green complete all as specified and as directed. Note : WPC compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.

M&L for APP polymeric water proofing membrane 3.00 Kg per sqm and min 3 mm thick reinforce with polyster non wooven fabric (wt not less than 150 gms/sqm) laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over compatible bitumen primer at 0.40 ltr/sqm including cleaning surfaces all as instructed as per manufacturer complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal to store, bore of pipe 15 mm dia complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal to store, bore of pipe 20 mm dia complete all as specified and as directed.

S&F 15 mm GI tubing medium grade galvanized with all fitting and fixed complete to wall or laid on floor complete all as specified and as directed.

S&F 20 mm GI tubing medium grade galvanized with all fitting and fixed complete to wall or laid on floor complete all as specified and as directed.

S&F in repairs Bib tap long body cast copper alloy with chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed.

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs tubular rail 20mm dia, D Type, 60cm long between flanges complete all as specified and as directed.

S&F 600mm long PVC Connection with two nos PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and as directed.

S&F in repair gate valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle suitable for 20 mm dia bore, screwed both ends for iron pipe complete all as specified and as directed.

S & F in repairs for vitreous china wash basin white flat back, size 580x450mm incl brackets, cutting for and pinning in ends or brackets, incl 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) and waste pipe complete all as specified and as directed

S&F in repairs CP grating 110mm complete all as specified and as directed.

S & F in repair rotational moulded polythylene water storage tank with float valve, plastic lid cover, tripple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs incl making connections complete all as specified and as directed.

S&F in repair 15mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch and butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed

Demolition of stone slab and tiles of any description or th in floors , aprons etc complete all as specified and as directed

M&L for machine cut cudappa stone slab 20-25mm thick for kitchen platform over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. pigment to match the shade of granite stone complete all as specified and as directed

Demolition of RCC in ground floor and pavings exc 15cm thick in complete all as specified and as directed

M&L for RCC nominal mix type B1 1:2:4 for slabs supported on walls for kitchen platform complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

S&F kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed in CM 1:4 and jointed with ditto as per item above complete all as specified and as directed

M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles and laid over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for glazed Coloured CeramicTiles (350x250x7/ 450x350x7) on vertical surfaces such as skirtings, dados and risers to steps including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) etc complete all as specified and as directed.

Taking down of chowkhats or frames not exc 1.5 sqm each with shutters (with out taking off shutters from the frame) complete all as specified and as directed

Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S & F Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L Cement Concrete type C-0 (1:3:6) using 12.5mm graded aggregates as in filling in pressed steel chowkhat, fixing of hold fast etc complete all as specified and as directed

S & F factory made 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veeneering on both faces. The size of rail and site as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified as and as directed

S&F factory made 2nd Class Hardwood 35 mm thick glazed and skeleton shutters open rebated & prepared to receive glass, gauge etc without sash bars edges & mitred beads for securing glass/gauge etc complete all as specified and as directed

S&F 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick complete all as specified and as directed

Supply & Fixing Bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay) for large gates, hook & pintle hinges; large hasp & staples; hand made sliding bolts; clamps; hold fasts and similar articles confirming to Fe 290, Gde E 165 complete all as specified & directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregates) as in hold fast block, including formwork complete all as specified and as directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

All as per item No 47.00 but without glazing bars complete all as specified and as directed

S & F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and directed.

S&F 100mm butt hinges, aluminium anodised of extruded section complete all as specified and as directed

S&F 100 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

M&L for preparation of new wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and as directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet with crumpled ends , 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed work complete all as specified and as directed

S&F structural steel work conforming to Fe-290 Gde E-165, as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed.

M&L for Brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar and including demolition of brick complete all as specified and as directed.

Demolition of concrete concrete (unreinforced ) in ground floor and pavings n exc 15cm thickness (below or above ground level) and removing the rubbish off the premishes all as directed by and specified by Engineer in charge

100mm thick PCC (1:4:8) type D-2 (using 40mm gradded crushed stone aggregate) as in sub base complete all as specified and directed.

M & L for 75 mm thick cement concrete type C2 (1:3:6)using 40 mm graded stone aggregate as in plinth protection/path laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels using dividing strip, finishing exposed edges fair or rounding or chamfering where complete all as specified and as directed.

Supply and fixing 3 mm thick and 38 mm wide Glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed.

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed.

M&L for 40 mm thick cement concrete type B1 1:2:4, using 20 mm graded stone aggregates as in flooring/pavings complete all as specified and as directed .

Taking down cement plaster of any description on brick/ Stone Walls or from Concrete Surfaces incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside premises complete all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

S&F in repair stainless steel sink, 1.0mm thick for kitchen including stainless steel waste fittings and pvc waste pipe of 40mm dia, including cantilever cast iron brackets, connecting union etc, overall size 915 x 460 with bowl size 410 x 330 x 160mm with proper arrangements to hold and fitting of sink complete all as specified and as directed.

S&F in repair stainless steel gratings of outer frame dia 100mm openable type incl all necessary fittings such as hinges including embedding in tiles with white cement complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain including jointing with solvent cement 75mm dia complete all as specified and as directed.

S&F in repairs PVC SWR pipes 75mm bore single socketed incl bend, tee etc in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and as directed.

S&F vitreous china squatting pan, 'Orissa' pattern, 630 x 450 mm with integral foot rests (excluding flushing cistern and flush pipe, fixed in repair complete all as specified and as directed

S&F PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern low level white with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed

Taking down carefully concealed/casing capping point wiring copper/aluminium(light/fan/socket) complete (with fittings such as switches ceiling rose, pendents, regulators,sockets etc) and making good disturbed surface with existing specification complete all as specified and as directed

Material and Labour point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLSH cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing capping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc complete all as specified and directed for One light point controlled by one switch one way complete all as specified and as directed

All as per item No 81.00 above but for One ceiling fan point controlled by one switch one way complete all as specified and as directed

All as per item No 81 but one bell/buzzer point controlled by one push button complete all as specified and as directed

All as per item No 81.00. But for One socket outlet three pin 5/6 Amps controlled by one switch on the same board complete all as specified and as directed.

All as per item No 81.00 But for one switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board complete all as specified and as directed.

M and L for point wiring with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLSH, PVC insulated and unsheathed cable 1100 volts grade, multi stranded, for earth ,ISI marked drawn in and including PVC casing caping of suitable size with accessories ISI marked including PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting complete all as specified and directed

M&L switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed

S&F socket outlet 5/6 pin type,5 Amps, 240 V complete all as specified and directed

S&F socket outlet (Multipurpose type) but 5A/15A flush type complete all as specified and as directed.

S&F switch flush type 15/16A complete all as specified and as directed.

S&F in replacement lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed

S and F call bell electrical operated complete all as specified and as directed

S&F fan regulator electronic step type AC 240 Volts,50 Hz complete all as specified and as directed

S and F bell switch piano flush type complete all as specified and directed.

M&L sub main wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in PVC Casing caping of 2 run of 4sqmm PVC FRLS copper cable and 1run of 4sqmm PVC FRLS copper cable for earth wire complete all as specified and directed. Note for sub main wiring :- (i) 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM (ii) Groove Cutting ,pinning and plastering of disturbed surface etc shall deemed to be included in the quoted rate.wiring 2 run of wire and1 run of earth wire complete all as specified and as directed

Supply and Fix in replacement to wall / pole of any height LED bldg security light 25 watt including GI pipe sutaible dia bracket not less than 1 mtr bend to shape with 2 clamps, nuts, bolts, washers and PVC 3 core ISI mark flexible wire from ceiling rose to fitting complete including takingdown old one all as complete all as specified and as directed

S&F in replacement LED tube light lamp 1 x 18/20 watt retrofit including suitable size of batten complete (01 set) (single / double side connection) incluing taking down existing fitting complete all as specified and as directed.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 4 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete all as specified and as directed.

S&F in replacement of MCB SPN 32 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series complete all as specified and as directed.

S&F in replacement of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series complete all as specified and directed.

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed.

S and F in repairs of sheet steel enclosure with Double door TPN 4 ways 440 volt factory fitted rated bus bars,earth bar,neutral links complete including blanking plates as required and making good the disturbed surfaces all as specified and as directed.

S and F in replacement of MCB TPN 63 Amps 415V ,50 Hz ,breaking capacity 10 KA," C " series all as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cables,GI/CI pipe lines etc getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed.

M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil. complete all as specified and directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. Note : Punned thickness only shall be measured and paid.

Supply and lay un-reinforcement precast concrete cable cover, class LV, type 2, flat of size 300 X 180 X 40mm for LT cable and laid dry in trenches over underground cables complete all as specified and directed

Taking down carefully submain wiring including batten/conduit by unscrewing from wall, ceiling and making good surfaces to match with original status complete all as specified and as directed.

Supply & fix shadowless light fitting complete with power unit & battery back up for 30 min (Max 5 KVA) having dome of LED 50 single Dome shadowless OT light + 360 degree rotation from the central and revolving axis, Sterilisable handle present at the centre of the dome to adjust the focus of the light, which provides an excellent spot diameter between 130-300mm, USA Core Plate for narrowing the focus beam, excellent focusing and cold light effect, with LED 50000 hrs life, 3 different modes of surgeries-ENDO mode, Surface mode and D Cavit, 24Volts, 48Watts, 00000-160000 Lux (adjustable through control panel) with colour temperature of 4300+500 K,Lighting Depth >1250mm, Dimming Control 08 shift scales and CRI (Ra)>96 LED complete all as specified and as directed having fwg features Technical specification : (a) Single dome mobile type (b) Light Intensity - 00000-160000 Lux (c) Adjustable color range 4500K (d) Color radiation Index -> = 96 (e) Spot diameter (MM) - 130-300mm (adjustable) (f) Lighting Depth - (MM) ->= 1250mm (g) Supply voltage - 220-240V (h) Power Consumption at full power - 48 W The contractor have to submit Make with detailed specification for recommendation of Engr-in-Charge and approval of GE before purchasing the dome LED Lights

M/S BHULLAR CONSTRUCTION COMPANY

M/s Rahul Kumar Agrawal

M/S Maa Durga Constructions,Pulgaon

Chhabra Enterprises

M/S JAI BHAWANI CONSTRUCTIONS

M/s Dara Constructions, Pulgaon

SHUBHAM SALES

Bidder Name

Attar Singh and Sons

M/s Dara Constructions, Pulgaon

M/S Maa Durga Constructions,Pulgaon

M/s Rahul Kumar Agrawal

M/S JAI BHAWANI CONSTRUCTIONS

M/S BHULLAR CONSTRUCTION COMPANY

SHUBHAM SALES

Chhabra Enterprises