PROVN OF TOILET BLOCKS AND BATHROOMS IN NORTH AREA AT NASIRABAD

Amount

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified & directed.

All as per item No. 3.00 here-in-before but exc 1.5 mtr & not exc 3.0 mtr

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in hard/dense soil complete all as specified & directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/disintegrated rock complete all as specified & directed.

Spreading, leveling, watering and well ramming in layers n.exc 25 cm thick with soil complete all as specified & directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in soft/loose soil including returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specifed and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified & directed.

Removal of excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified & directed.

Removal of excavated material (rock) n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20mm thick graded stone aggrigate) as in joist/vertical post and similar works etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends , and binding with and including binding mild steel wire(annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

---------BLANK-----------

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for RCC M-25 grade (design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-25 grade (design mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for RCC M-25 grade (design mix) mix using 20mm graded aggregates as in Roof beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-25 grade (design mix) mix using 20mm graded aggregates as in roof slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc, flat surfaces of concrete , surface is required to be fair finished complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, flat surfaces of concrete, surface is required to be fair finished complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works n. exc. 200mm thick surfaces fair finished complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n. exc. 20cm wide and sides of RCC/PCC band in walls etc surfaces fair finished complete all as specified and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete, surface is required to be fair finished complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggrigate), 40mm thick as in DPC using WPC @ 3% by wt of cement complete all as specified and directed.

Supply only integral water proofing compound, ISI marked complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc. complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, metered /stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed.

Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benchings complete all as specified and directed.

Supply & laying FRP septic tank package type waste water treatment system (PWTS) Model No. PWTS-AM-180-01 of Sintex or equivalent 1490mm dia and 1615mm height including necessary inlet & outlet pipe designed to carry sewage and salvage water, With UPFLOW FILTER INLCUDING MEDIA including necessary excavation, PCC (1:4:8) below foundation bed, vent pipe, inlet and outlet connection pipe upto 2.00m length etc, complete all as specified and directed. Make :- Model No. PWTS-AM-180-01 of Sintex or equivalent make if approved by GE.

M & L for soakage wells including excavation in any type of soil, foundation in PCC (1:4:8), walls of honey combed fly ash brick masonry with top ring of RCC 1:1.5:3 type A-1 concrete including intercepting chamber and screen chamber made of fly ash brick masonry in CM (1:6), RCC cover slab in1:1.5:3 type A-1 & SFRC MH cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia & 3.0m effective depth all as per drg No. CEBZ/TD/78/2011 sh No 1/2 & 2/2 complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks , straight or curved on plan to any radius built in half brick thick wall, built in CM 1:4 complete all as specified and directed.

M&L for stone walling of Random rubble, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling of random rubble, uncoursed for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 20mm complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm crushed stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, parapets, bed blocks, copings, roof kerb, benching/haunching, bed plates, roof padding and the like including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and directed .

M & L for hardcore of broken stone gauge n. exc. 63mm deposited, spread and levelled in layers n exc 15cm thick including watering and ramming to a true surface complete all as specified and directed.

M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternate bays n.exc 2m in length and joints filled with bitumen mastic 1:1 complete all as specified and directed.

---------BLANK-----------

M & L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base, floors complete all as specified and directed.

M & L for 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, floors complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) & 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) complete all as specified and directed.

M & L for rubberised machine pressed precast conctete interlocking paver block any shape and size ISI marked of 60 mm thickness, M-35 Grade with grey cement and pigment coloured,reflective type of approved quality laid over and including 25 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M & L for glazed ceramic tiles 300X 450X 7-8mm thick in vertical surface such as skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile over and incl 10mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles 25 x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 20 mm screed bed in CM (1:4) complete all as specified & directed.

M & L 50mm thick providing precast cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in cover slab set in CM 1:6 complete all as specified and directed.

---------BLANK-----------

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note :- Supply of WPC will be measured and paid for separately.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

---------BLANK-----------

---------BLANK-----------

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces as in ceiling surfaces (CM 1:4), finished fair and even complete all as specified & directed.

M & L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceilings and applying three coat of white wash complete all as specified and directed

M & L for preparation of newly plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

M & L for rolled mild steel work as in door frame (Chowkhats) including provn of 12mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F factory made PVC solid frame of size 50mmx47mm made out of 5mm prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. square tube and fixing in opening as per specification & drawing on page 160 of SSR-2010 complete all as specified and directed.

S & F second class HW Hollock/Sal/Bansum 35mm thick, factory made, plain framed, paneled shutter (three panels) with panels of 9mm thick BWP marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 156 of SSR Part - II 2010 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and

S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples with complete all as specified and directed

S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S & F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.

S & F 150mm long aluminium, anodised, barrel tower bolt of extruded section, ISI marked complete all as specified & directed.

S&F 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed.

M & L for preparation of new steel & iron surface of width or girth exceeding 10cm and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer complete all as specified and directed

---------BLANK-----------

M & L 40mm thick sand stone slab, set & jointed on joints in CM 1:4 including 25mm thick PCC 1:2:4 type, B-0, using 12.5mm graded crushed stone aggregate (for providing bottom cover to PVC tank) complete all as specified and directed.

S & F for rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top), double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed.

S&F 20mm bore gun metal gate valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 75.00 here-in-before but 20mm dia

All as per item No. 75.00 here-in-before but 25mm dia

S&F bib tap long body ,fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore of pipe complete all as specified and directed.

S&F chromium plated 15mm bore stop/angle valves, fancy type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-charge.

S&F vitreous china wash hand basin, white, flat back, size 580x450mm excluding taps, waste, chain and flug and porcelain stopper including brackets, PVC waste pipe & pvc watse coupling complete all as specified and directed.

S & F Vitreous China, wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bootm and mild steel chromium plated hinge device including connections to drain (or outgoing pipe) and to flushing pipe anti symphonage pipe etc complete all as specified and directed.

S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

S&F vitreous China urinal, flat back, half stall type white/ ivory colour with grating and Union for discharge pipe. Including connection to flushing pipe and outgoing waste pipe, complete all as specified and directed.

---------BLANK-----------

S&F PVC valve less syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S & F PVC connections 15mm size, 450mm long with PTMT nut of approved quality complete all as specified and directed.

S&F Jet flush including plate & PVC connection complete all as specified and directed.

S & F chromium plated telephonic health faucet shower with flexible tube of stainless steel, 1.5 Mtr long & hook, multi flow 15mm dia for iron pipe or for brass ferrule complete all as specified and directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.

S&F aluminium anodised tubular towel rail including brackets, 20mm dia, D type, 600mm long fixed with screws complete all as specified and directed.

S&F brass chromium plated shower rose of 125 mm size with swivel joints, mixing valve, including three joints to steel pipe or unions and plugging and screwing to wall including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S & F grating square/round of size 125mm of PTMT with centre hole or side hole (minimum weight 100gms) complete all as specified and directed.

S&F PVC (SWR) floor/nahani trap with grating 75mm dia fixed with lead joint complete all as specified and directed.

S&F PVC (SWR) gully trap with grating 125/110mm dia fixed with lead joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, laid in trenches or in floors complete all as specified and directed.

All as per item No. 97.00 here-in-before but 75mm bore PVC (SWR) pipe

S&F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified and directed.

S & F PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

All as per item No. 100.00 here-in-before but 110mm vent cowl

S&F PVC (SWR) 110 mm bore bend/shoe of any radius fixed with cement joint complete all as specified and directed.

All as per item No. 102.00 here-in-before but 75mm bore bend/shoe

S & F 110mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F 100mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints,fixed to wall with existing clamps complete all as specified and directed

S & F 75mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed

S & F 75mm dia (bore), cast iron (sand cast) soil, waste & vent, ISI Marked in any length with or without ears, with cement joints, fixed to wall with existing clamps complete all as specified and directed

S & F 75mm bore CI cowl complete all as specified and directed.

M&L for 50mm thick sand stone slabs in sun shades, chajjas, shelves cills, landings, cover stones, templates etc, n.exc 2 m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

M & L PCC 1:3:6 Type D-2 using 40mm graded stone aggregate as in bed of drain pipe of 150mm dia (nominal) including packing under and haunching against the size of after they are laid and tested complete all as specified and directed.

M & L for 150 mm bore salt glazed stone ware drain pipe ISI Marked laid in trenches and jointed in CM (1:1) tested complete all as specified & directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using blown type bitumen Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

Material and labour for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.6metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest/JSW.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. Make :- Durashine of Tata Blue Scope and Dura Steel of Everest/JSW.

S & F rolled mild steel framed work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including drilling for fixing of steel sheeting or other covering confirming to Fe-290 (Gde E-165) quality-A complete all as specified and directed

Supply, laying, jointing and testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed. Note :- Excavation, earth work, sand cushoning and cable cover will be measured and paid separately.

Supply, laying, jointing and testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core complete all as specified and directed. Note :- Excavation, earth work, sand cushoning and cable cover will be measured and paid separately.

M & L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables complete all as specified and directed. Note :- For the purpose of payment only punned thickness will be measured.

M & L for old size sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius for cable cover laid flat adjoining to each other width wise complete all as specified and directed.

S & F GI pipe light grade for cable protection of size 40mm dia laid in trenches/ducts or fixed to pole/wall including necessary fixing arrangements with clamp of suitable sizes complete all as specified and directed.

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher with all PVC conduit accessories with suitable size of sunk type pressed steel terminal box concealed in wall, with PVC laminated sheet top cover 3mm thick with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable connected to common earth dolly for One light point/fan point controlled by one, one-way 5 Amps complete all as specified and directed.

S & F switch piano type, flush button, single pole, one way 5 Amps, 240 Volts, complete all as specified and directed. Make : Anchor / SSK /Leader /CONA

S&F ceiling rose surface bakelite, 3 terminals, 63.5 x 17 mm complete all as specified & directed. Make : Cona / SSK / Anchor

S&F MCB single pole and neutral 240 volt, 10 KA, 10 to 40 Amps capacity confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed.

S&F MCB single pole 240 volt 10KA, 5 to 32 Amps confirming to IS 8828 of 1996 curve 'C' complete all as specified & directed.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings including one LED lamp 9/11 watt complete all as specified and directed. Make : Cona / SSK / Anchor

Supply and fixing testing and commissioning energy saving street light luminaire suitable for & including 15 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete with individual LED lences and accessories fixed on pole by means of bracket of GI pipe, 32mm bore, light grade 1.20 mtr long, cut to length and bent to shape and mild steel clamp of 40 x 6 mm size, (2 Nos) nuts, bolts of required size and length (01 No nut and bolt shall be passed through bracket and clamps complete all as specified and directed. Make Bajaj cat part No. BCLST 15W LED, Havells Cat Part No LHEWEBP7PL6S015, or equivalent make of Philips / Crompton

S & F LED tube light fitting retrofit batten in acrylic linear tube (1x18 watt), 230 V for single LED tube light including 1x18 W LED retrofit bar professional CW 6500 K cover channel, bipin holder, LED power driver, connector block, etc complete with all accessories internally prewired and incuding connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make : Bajaj Cat part No BLRB 18 W CWC for tube BLRB - DB 118 for batten, Havells cat part No LHLDDBXEUL7Z018 (for tube) LHFYBP1TB1W20 (for batten), Syska cat part No SSK - T-8-18W (tube) SSK-TL-22 F (batten).

S & F aesthetically designed linear LED mirror light fitting 7 Watt provided with a high output PMMA diffuser for glare free light complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make :- Crompton Cat part No. LCL-07-CDL or equivalent as per appendix 'B'.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-43 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. Make : Legrand/ Siemens/ Schneider Note : MCB DB and MCB will be of same make.

S&F exhaust fan 300mm sweep, 230 volts, 50Hz alongwith necessary connecting and fittings, including making hole including with louvers before making man holle in wall and making good the disturb surfaces for mounting of exhaust fan and louver, complete all as specified and directed. Make :- Havells Model-Ventil Air DB or equivalent as per appendix 'B'

S&F exhaust fan metal body 250mm sweep, 230 volts, 50Hz alongwith necessary connecting and fittings, including making hole including with louvers before making man holle in wall and making good the disturb surfaces for mounting of exhaust fan and louver, complete all as specified and directed. Make :- Havells Model-Ventil Air DS or equivalent as per appendix 'B'

M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6.00mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia medium grade GI pipe and watering pipe shall be 20mm bore, medium grade including excavation & earth work in any type of soil & disposal of sil chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover, reinforced with 8mm TMT bars 100mm C/C both ways with life hook made out of 8mm dia bars, watering arrangement with funnel and wire mesh completed all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

M & L preparation of new wooden surfaces of width or girth exc 10cm and applying two coats of synthetic enamel paint over a coat of pink primer completed all as specified and directed.

SHREE BALAJI TRADING CORPORATION

M/S SHIVA TRADERS

M/s Jai Jinendra Constructions

M/S Nexus Projects

M/s SUNIL ENTERPRISES

K B Enterprises

PD GUPTA AND COMPANY