Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹3.1 L
Closing Date
20 Jul 2026, 10:30 pm
Karnataka State Small Industries Development Corporation Limited
Repairs and Renovation of Techno Industrial Complex Building of KSSIDC Kalaburgi, Kalaburgi District.
KSSIDC/2026-27/BD/WORK_INDENT38
KSSIDC/2026-27/BD/WORK_INDENT38
Open
Buildings
KSSIDC Head Office Bengaluru
8 documents required · 8 mandatory
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Mandatorily satisfactorily completed as Prime Contractor, at least one Similar nature of work Value not less than Rs. 104.00 Lakhs in support of this, the Tenderer shall furnish a Certificate duly certified by the Competent Authority not below the Rank of Executive Engineer along with the Technical Bid
Achieved in at least two Financial Years a minimum Financial Turnover (in all classes of Civil Engineering Construction Works only) of Rs. 416.02 Lakh
Executed in any one Financial Year, the following minimum quantities of Work-Structural Steel -22837.00 Kg b.Painting 4882.50 sqmc.Granite/Vetrified floor 1146.72 Sqm
Liquid Assets and / or availability of Credit Facilities of no less than Rs.62.40 Lakh (Credit Lines / Letter of Credit / Certificates from Banks for meeting the Fund Requirement, etc.)
Karnataka PWD/ CPWD, REGISTRATION CERTIFICATE
GSTIN REGISTRATION CERTIFICATE
₹5,000
₹3.1 L
19 Jun 2026
19 Jun 2026
22 Jul 2026
29 Jun 2026
30 Jun 2026
Repairs and Renovation of Techno Industrial Complex Building of KSSIDC Kalburgi, Kalburgi District.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Cleaning sub surface drains including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster p...
Cleaning of exposed concrete surface from oily sticking material, algae and other wet conditions by sand blasting complete as per direction of Engineer incharge of work.1.Basement =427Sqm ---- All ter...
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.1....
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Filling approved earth (excluding rock. in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and...
Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush comple...
Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work. 1.Basement =40.285Sqm ---- All terms and conditions as per standard tender document
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Shotcreting R.C.C. columns, beams and slabs etc. in 50 mm thickness with approved design mix Sqm5 concrete having the specified minimum characteristic compressive strength with OPC / PPC / PSC coarse ...
Providing 6 mm cement plaster with cement mortar 1 3 (1 cement 3 fine sand. on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Removing the old paint or polish from wood and / or wood based surface with caustic soda solution and making surface even including cost of materials, labour, complete as per specifications. 1.Basemen...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound . content less than 50 g/L of approved brand and manufacture, including applying additional c...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1 2 4 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nomin...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC Bathroom, cold applied ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer., of 1st quality conforming to IS 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Dismantling doors, windows and clerestory windows (steel or wood. shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...
Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications.1.Basement =331.25Sqm ---- All terms ...
Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Dismantling doors, windows and clerestory windows (steel or wood. shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite. solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing stainless steel ( Grade 304. railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required. and fitt...
Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging. including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following ope...
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm,reinforced with 8 mm dia four nos longitudinal & 9 nos c...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush comple...
Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work. 1.Ground Floor =49.07Sqm ---- All terms and conditions as per standard tender docume...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50 m to...
Shotcreting R.C.C. columns, beams and slabs etc. in 50 mm thickness with approved design mix Sqm5 concrete having the specified minimum characteristic compressive strength with OPC / PPC / PSC coarse ...
Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1 1 and then preparing Cement Mortar of 1 3 admixed with SBR latex at a dosage ...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1 4 (1 cement 4 coarse sand. including cost of all materials, labour, sca...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for...
Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand. to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Removing the old paint or polish from wood and / or wood based surface with caustic soda solution and making surface even including cost of materials, labour, complete as per specifications. 1.Ground ...
Treating Severe Dampness & Rising dampness in Walls Providing and Applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Repair Mortar on int...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC Bathroom, cold applied ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer., of 1st quality conforming to IS 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite. solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing stainless steel ( Grade 304. railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required. and fitt...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound . content less than 50 g/L of approved brand and manufacture, including applying additional c...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade New work...
Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dus...
Repair of pull and push type rolling shutters of made of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel l...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. 100 mm dia pipe.1.Ground ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.1....
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.1.First Floor =27.8208Cum ---- All term...
Chipping unsound weak concrete material from slabs. Beams, columns & roofs upto 50mm by manual means or by standard power driven percussion type including cleaning reinforcement with wire brush comple...
Cleaning of reinforcement from rust by Alkaline solution thoroughly as per direction of Engineer in charge of work. 1.First Floor =84.335Sqm ---- All terms and conditions as per standard tender docume...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Shotcreting R.C.C. columns, beams and slabs etc. in 50 mm thickness with approved design mix Sqm5 concrete having the specified minimum characteristic compressive strength with OPC / PPC / PSC coarse ...
Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1 1 and then preparing Cement Mortar of 1 3 admixed with SBR latex at a dosage ...
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1 4 (1 cement 4 coarse sand. including cost of all materials, labour, sca...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/tra...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for...
Providing 12 mm cement plaster with cement mortar 1 4 (1 cement 4 fine sand. to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Removing the old paint or polish from wood and / or wood based surface with caustic soda solution and making surface even including cost of materials, labour, complete as per specifications. 1.First F...
Treating Severe Dampness & Rising dampness in Walls Providing and Applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Repair Mortar on int...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer., of 1st quality conforming to IS 15622, of approved make, in all colours, shades, e...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shades, lai...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The til...
Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick. and other side balancing lamination(preferably white. on factory pressed BWP gra...
Providing and fixing skirting with teak shade pre-laminated (one side decorative and other side balancing lamination. flat pressed 3 layer or graded particle board (medium density. Grade I, Type II, I...
Dismantling doors, windows and clerestory windows (steel or wood. shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size grani...
Providing and fixing bright finished brass handles with screws etc. complete Brass handles 125 mm with plate 175x32 mm1.First Floor =10Each ---- All terms and conditions as per standard tender docume...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type.1.First Floor =30Nos ---- All terms and conditions as per standard tender documen...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality. for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing bright finished brass tower bolts (barrel type. with necessary screws etc. complete 250x10mm1.First Floor =10Each ---- All terms and conditions as per standard tender document
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016. sections and with minimum TiO2(Titanium Dioxide. at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016. sections and with minimum TiO2(Titanium Dioxide. at 6PHR with TPE(Thermo Plastic Elastomer. and lead fr...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC Bathroom, cold applied ...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite. solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound . content less than 50 g/L of approved brand and manufacture, including applying additional c...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade New work...
Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dus...
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. 100 mm dia pipe.1.First F...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet. having modular density 40kg/Sqm and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel...
Providing & fixing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS 14871. roofing up to any pitch and fixing with polymer coated J, or L ...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g.1. INT.WS Basement=4Nos ---- All terms and conditions as per standard...
Providing and fixing gun metal non- return valve of approved quality (screwed end. Horizontal1. INT.WS Basement=2Nos ---- All terms and conditions as per standard tender document
Providing and fixing gun metal non- return valve of approved quality (screwed end. Horizontal1. INT.WS Basement=2Nos ---- All terms and conditions as per standard tender document
Providing and fixing C.P. brass stop cock (concealed. of standard design and of approved make conforming to IS 8931.1. INT.WS Basement=4Nos ---- All terms and conditions as per standard tender documen...
Providing and fixing brass stop cock of approved quality 20 mm nominal bore.1. INT.WS Basement=2Each ---- All terms and conditions as per standard tender document
Providing and fixing ball valve (brass. of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore.1. INT.WS Basement=2Nos ---- All terms and conditions as per standa...
Providing and fixing ball valve (brass. of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore.1. INT.WS Basement=2Nos ---- All terms and conditions as per standa...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end. 25 mm nominal bore.1. INT.WS Basement=2Nos ---- All terms and conditions as per standard tender docum...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch. suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular. bricks.1. INT.WS Basement=20Each ---- All terms and conditions as per standard tender ...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 (1 cement 2 coarse sand 4 g...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g.1. INT.WS Ground Floor =4Nos ---- All terms and conditions as per sta...
Providing and fixing gun metal non- return valve of approved quality (screwed end. Horizontal1. INT.WS Ground Floor =2Nos ---- All terms and conditions as per standard tender document
Providing and fixing gun metal non- return valve of approved quality (screwed end. Horizontal1. INT.WS Ground Floor =2Nos ---- All terms and conditions as per standard tender document
Providing and fixing C.P. brass stop cock (concealed. of standard design and of approved make conforming to IS 8931.1. INT.WS Ground Floor =4Nos ---- All terms and conditions as per standard tender do...
Providing and fixing brass stop cock of approved quality 20 mm nominal bore.1. INT.WS Ground Floor =2Each ---- All terms and conditions as per standard tender document
Providing and fixing ball valve (brass. of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore.1. INT.WS Ground Floor =2Nos ---- All terms and conditions as per s...
Providing and fixing ball valve (brass. of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore.1. INT.WS Ground Floor =2Nos ---- All terms and conditions as per s...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end. 25 mm nominal bore.1. INT.WS Ground Floor =2Nos ---- All terms and conditions as per standard tender ...
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter1. INT.WS Ground Floor =2Nos ---- All terms and conditions as per standard tender document
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 89311. INT.WS Ground Floor =2Nos ---- All terms and conditions as per standard tender...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular. bricks.1. INT.WS Ground Floor =10Each ---- All terms and conditions as per standard te...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 (1 cement 2 coarse sand 4 g...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g.1. INT.WS First Floor =4Nos ---- All terms and conditions as per stan...
Providing and fixing gun metal non- return valve of approved quality (screwed end. Horizontal1. INT.WS First Floor =2Nos ---- All terms and conditions as per standard tender document
Providing and fixing gun metal non- return valve of approved quality (screwed end. Horizontal1. INT.WS First Floor =2Nos ---- All terms and conditions as per standard tender document
Providing and fixing C.P. brass stop cock (concealed. of standard design and of approved make conforming to IS 8931.1. INT.WS First Floor =2Nos ---- All terms and conditions as per standard tender doc...
Providing and fixing brass stop cock of approved quality 20 mm nominal bore.1. INT.WS First Floor =2Each ---- All terms and conditions as per standard tender document
Providing and fixing ball valve (brass. of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore.1. INT.WS First Floor =2Nos ---- All terms and conditions as per st...
Providing and fixing ball valve (brass. of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore.1. INT.WS First Floor =2Nos ---- All terms and conditions as per st...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end. 25 mm nominal bore.1. INT.WS First Floor =2Nos ---- All terms and conditions as per standard tender d...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end. 32 mm nominal bore.1. INT.WS First Floor =4Nos ---- All terms and conditions as per standard tender ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end. 40 mm nominal bore.1. INT.WS First Floor =4Nos ---- All terms and conditions as per standard tender d...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end. 50 mm nominal bore.1. INT.WS First Floor =4Nos ---- All terms and conditions as per standard tender d...
Providing and placing on terrace (at all floor levels. polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular. bricks.1. INT.WS First Floor =2Each ---- All terms and conditions as per standard tend...
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 (1 cement 2 coarse sand 4 g...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...
Providing and fixing water closet squatting pan (Indian type W.C. pan . with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.1. SAN.BS...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.1. SAN.BS Floor =2Each ---- All terms and conditions as per stand...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Economy Class1. SAN.BS Floor =6Each ---- All terms ...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality. complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.1. SAN.BS Floor =4Each ---- All terms and conditions as per standard tender ...
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions. with modular bricks of CD 75 in cement mortar 1 6, bed concrete 150mm thick with 1 3 6, plaster...
Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & wi...
Providing and fixing PVC (S.W.R. Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete 1. SAN.BS Floor =5Each ---- All terms and conditions as per standard tende...
Providing and fixing water closet squatting pan (Indian type W.C. pan . with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal type water closet (European type. with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Economy Class1. SAN.Ground Floor =6Each ---- All te...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.1. SAN.Gr...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.1. SAN.Ground Floor =2Each ---- All terms and conditions as per s...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality. complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.1. SAN.Ground Floor =2Each ---- All terms and conditions as per standard ten...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & wi...
Providing and fixing PVC (S.W.R. Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete 1. SAN.Ground Floor =5Each ---- All terms and conditions as per standard t...
Providing and fixing water closet squatting pan (Indian type W.C. pan . with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal type water closet (European type. with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Economy Class1. SAN.First Floor =6Each ---- All ter...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.1. SAN.Fi...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.1. SAN.First Floor =2Each ---- All terms and conditions as per st...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality. complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weigh...
Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bricks of designation 3.5 & wi...
Providing and fixing PVC (S.W.R. Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete 1. SAN.First Floor =3Each ---- All terms and conditions as per standard te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock. in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50...
Additional for formwork, Centering & Scaffolding As per PWD Common SOR Volumen-1, Addendum-I in Page No.-111, of Sl No 1. a Foundation upto plinth Isolated for Percentage on finished rate of concrete...
Additional for formwork, Centering & Scaffolding As per PWD Common SOR Volumen-1, Addendum-I in Page No.-111, of Sl No 11. Earth retaining structures for Percentage on finished rate of concrete per Cu...
Additional for formwork, Centering & Scaffolding As per PWD Common SOR Volumen-1, Addendum-I in Page No.-111, of Sl No 15. Plinth Beams of Buildings, RCC Roof Slabs for Percentage on finished rate of ...
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Polyurethane based water proofing for Retaining Wall Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moistur...
Providing 20 mm cement plaster of mix 1 6 (1 cement 6 fine sand. to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing, assembling and supplying vision glass panels (IGUs. comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed. vision panel units of size and shape as required and specifi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC. pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch. suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Open Conduit System Supplying heavy gauge PVC conduit pipe dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste et...
Supplying heavy gauge PVC conduit pipe dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing us...
Supplying heavy gauge PVC conduit pipe dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing us...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction ...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wa...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wa...
Supplying And Fixing Metal Fan Box with Round Hook. ---- All terms and conditions as per standard tender document
WIRES & CABLES Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS m...
Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand ...
Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand ...
Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand ...
Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wir...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wir...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wir...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wir...
SWITCHES, SOCKETS & ACCESSORIES Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mou...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted
after due groove cutting in...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted
after due groove cutting in...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted
after due groove cutting...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted
after due groove cutting in...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted
after due groove cutting in...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts ...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 6A One Way Switch ---- All terms and condit...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 6A Two Way Switch ---- All terms and condit...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 6A Three Way ---- All terms and c...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. Stepped Fan ---- All terms and ...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 16A One Way ---- All terms and co...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 6A Bell Push ---- All terms and conditions ...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 32A DP Switch ---- All terms and conditions...
Supplying and fixing of modular switch & connected accessories on existing modular switch
plate as per IS 3854 and IS 1293. 6/16A Universal ---- All terms and...
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators
etc, and fixing on existing wooden or metal box using ---- All ter...
CONTROL SWITCH GEARS & ACCESSORIES Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on...
Supplying and fixing single phase preventer using
necessary wires over an existing panel board suitable for motor upto 20 HP capacities. ---- All terms and conditions as per standard ten...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one
capacitor. upto 5 kVAR ---- A...
Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG
powder coated paint of approved colour. 32A ---- All terms and conditions as...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same ...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary
nuts, bolts and washers. 63 A ---- All terms and conditions as per standard tender...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty
and as per IS- 13947. 63 A ---- All terms and conditions as per standard tender docu...
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all
accessories. (SM Enclosure Sheet Metal Execution) ---- All terms and condition...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc.,
complete with AC-...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and ...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, ...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing su...
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. ---- All terms and conditions as per standard tender document
Supplying, fixing and wiring 0 to 100 A Direct Reading
AC analog type Ammeter ---- All terms and conditions as per standard tender document
Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- All terms and conditions as per standard tender document
Supplying, fixing and wiring rotary selector switch
suitable for Voltmeter ---- All terms and conditions as per standard tender document
Supplying, fixing and wiring 3 Phase Digital
Ammeter - Voltmeter ---- All terms and conditions as per standard tender document
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, k...
Supplying and fixing of LED type panel board
indicating lamp with required colour suitable for 230-440VAC. 50 Hz 12-24V D.C. ---- All terms and conditions as per stand...
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocesso...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable colou...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2
Fabricating supplying and mounting MS box made out SWG suitable for floor -wall mounting, fully weather proof with provision for better heat dissipation, ...
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment. Detail Specification is as follow:
- In Conforma...
FANS and AIR CONDITIONERS Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light
duty suitable to operate on 230V 50Hz, AC Sup...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC
Supply complete. 12" Sweep (300 mm) ---- All terms and conditions as per standard tender...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374-19 and also comply with IS: 1709-1984 with latest amendment, Rated voltage 220 V-50 Hz, ...
UPS, VOLTAGE STABILIZERS,
BATTERIES and ACCESSORIES Supplying, erecting, testing and commissioning of ON-LINE UPS system suitable for op...
Supplying, installation, testing and commissioning of 12V ..AH batteries in poly propylene container for
D.G. sets. Low maintenance batteries, plate type. 120
AH capacity ---- A...
LUMINAIRS - LIGHT FIXTURES andACCESSORIES LED Indoor Supplying and fixing retrofit type-PL- LED Lamp
...... W LED linear source with CCT 6500 degree K, CRIgreater than 70per...
Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with ...
Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with ...
Supply of round-square recess-surface mounted rolling type LED Down light with W
GU 10 LED Lamp Rib Fabricated from diecast aluminium with...
Supplying of recess mounting non integral type
........ LED w luminaire comprising of pressure decast-extruded aluminium housing, with spring loaded false ceiling cl...
FIXING CHARGES On wall- ceiling - Rafter - Girders ---- All terms and conditions as per standard tender document
Fixing a ceiling - Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling ...
Extra length of GI pipe of class B 19mm dia for down ---- All terms and conditions as per standard tender document
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable ...
GI-Copper strips for grounding connections, using necessary fixing
materials as required. 25 x 3 mm GI strip ---- All terms and conditions as per standard tender document
GI-Copper strips for grounding connections, using necessary fixing
materials as required. 25 x 3 mm Copper strip ---- All terms and conditions as per standard tender document
LED NAME BOARD ---- All terms and conditions as per standard tender document
Supplying and drawing UTP-CAT 6E LAN cable. ---- All terms and conditions as per standard tender document
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2Pair ---- All terms and conditions as per standard tender document
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co- axial TV cable.RG-6. ---- All terms and conditions as per standard tender document
Supplying and Fixing of switch mounting rack with power manager and Cable manager. 12U with 450mm depth ---- All terms and conditions as per standard tender document
Supplying and Fixing of Power strip ---- All terms and conditions as per standard tender document
Supplying of shelf ---- All terms and conditions as per standard tender document
Supplying and fixing of Castor wheels to the
Shelf (set of 4) ---- All terms and conditions as per standard tender document
Supplying and Fixing of Fan ---- All terms and conditions as per standard tender document
Supplying fixing of Network Switches 48
Port Gigabyte (manageable) ---- All terms and conditions as per standard tender document
Supplying fixing of Network Switches 48
port 10-100 Switch ---- All terms and conditions as per standard tender document
Supplying and fixing of I-O socket with back
box Single I-O ---- All terms and conditions as per standard tender document
Supplying and fixing of I-O socket with back
box Double I-O ---- All terms and conditions as per standard tender document
Supplying and Fixing of ... ms Cat 6 Patch
Cable 2 m ---- All terms and conditions as per standard tender document
Supplying and Fixing of Patch panel for LAN
cabling 48 Port 10-100 patch panel ---- All terms and conditions as per standard tender document
Supplying and fixing of MDF krone junction box with KRONE Module -
Telephone cable termination. 20 Pair ---- All terms and conditions as per standard tender document
Supplying of .. TR Invertor type split Air conditioners suitable for operation on A-C supply single phase 50 Hz 230 V with hermetically sealed inverter compres...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split-ca...
Supplying and installation of insulated refrigerant copper tubing of 5-8" and 3-8" with polythene foam insulation 3 core 80 stand copper wiring between i...
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load pro...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
LOC Bankers Certificate.pdf
Others - LOC • 0.05 MB
Bank Guarantee.pdf
Others - Bank Guarantee • 0.01 MB
affidavit - rs 500.pdf
Others - Affidavit • 0.01 MB
AO building renovation kalaburgi.doc
Tender Document • 1.05 MB
Download all tender documents and submit your bid