Providing and installation U-Shape , L Shape signges board and Sign. Board at various locations in Shimla Town in various locations Himachal pardesh (Under Smart City Shimla

Amount

Providing, installing and fixing 13(thirteen) metres span over head gantry of 350 (three hundred fifty) NB M.S. pipe fixed with necessary clamps etc. retro-reflective single sided over head gantry sign boards/ cantilevers sign boards comprising of customized modular PU Epoxy coated M.S. hollow section frame work aluminum composite panel (ACP) mill finished or PVDF coated of as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The ACP shall be routed, folded and fixed on the MS frame with VHB tape, 24mm (twenty four milimetre) wide and 2.3 mm (two point three milimetre) thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5 mm (five milimetre) dia spaced not more than 300 mm (three hundred milimetre) center to center ensuring that no riveting is seen on either face of the frame. On the front face of the ACP, micro prismatic retro-reflective sheet conforming to type IX of ASTM:D 4956-09 shall be pressure fixed as background set. (In white colour) which will be over laid with electro cut transparent film of approved make and colour to create a desired road sign. The rear side of the MS frame shall be covered with balancing ACP of the same description as mentioned above and shall be fixed into he similar manner as described above. The edges of the abroad shall be covered all round with powder coated dia size extruded aluminum channel of required colour and shade of size 68x12x2 mm (sixty eight into twelve into two milimetre). The channel shall be fixed using two rows of double side VHB tape of above description. The channel further be secured by pop rivets having SS screws of 5 mm(five milimetre) dia at junctions and corners. The rate shall included all materials, labour, equipments, fabrication transportation, erection, installation and incidents all complete a sper direction of Engineer-in-charge. Only front area of the aboard shall be measured for payment. (All structural steel work shall be paid for separately under the relevant agreement item, except MS hollow section frame work and fixing arrangement with clamps for the sign boards). (a) U- shape gantries (Annexure -A attached) including GST

( b) L-shape gantries (Annexrure- B attached) including GST

Virender Thakur

SHASHANK KUMAR