Renovation of Hardoi Inspection House under the Hardoi Division Sharda Canal Hardoi

Amount

Dismanteling old flooring of concrete of brick or granolithic floor including base concrete including disposal of refuse as directed by engineer-in-charge with a distance of 60 mtr. (200 feet/M²)

Dismantlling existing plaster, including disposal of refuse as directed by the engineer-in-charge within distance of 60M.

Laying 75mm brick ballast and local sand Laying CC 1:3:6 base of concrete flooring including labour, Material, T&P etc complete.

Laying 25 mm cement concrete flooring 1:2 coarse sand 1:2:4 graded stone aggregate of size 1.5mm and below by volume laid over set and harded surface of structural slab of base 80mm thick cement & concrete 1:4:8 and finished with with the floating coat of neat cement using cement sulury for bond at the rate of 2.75kg. of cement per sqm of floor including fixing of glass stips.

Ist class brick work in 1:4 cement and coarse sand including all labour, Material T&P etc complete.

12 mm cement plastering 1:2 cement mortar single coat on rough side of single for interior plastering in single story building finished even and smooth.

12.5mm cement plastering 1:4 cement mortar single coat on rough side of single of half brick wall for interior plastering in single story building finished even and smooth.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Providing barbed iron wire fencing including fixing it to post after streching it including labour T& P etc required for proper completion of work also including supply of wire.

Removing of old paint from wall surface with paint remover approved brand including cost of all material.

Providing and laying vitrified floor tiles of sizes 600x600 (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).

Painting of wooden surface for approved brand paint required for proper completion of work including cost of all material.

Painting steel gate of boundry wall of I.H. including cost of all material.

Providing and fixing of mosquito Jali rquired for completion of work including cost of all material.

Finishing walls with water proofing cement paint of approved make such as suppr snoovcem, durocem, robiacem, guttucem, suppercem quality and of required shade on undecorated wall surfaces (Two coat) over and including one coat white cement primer to give an even shade after throughly brushing the surface to powered materials including curing and cost of all material.

Providing traced polythiline water storage tank of 1000 ltr ISI mark 12701 with cover and suitable taking arranging & making holes per inlet, Outlet, Overflow pipe without fitting in the base support for tank.

Providing and laying C.C. pavement on road of thickness 75mm of mix M-25 with ready mixed concrete from batching plant.The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately)Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board. 510x1040 mm bowl depth 225 mm.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid.

P/F chromium plated bib cock, complete with all materials of size l5mmdia.

P/F white vitreous china flat back urinal size 580x380x350 mm with 5 lit. P.V.C. flushing cistern on M.S. bracket with all C.P. brass fitting, flush pipe, C.I. trap and grating complete in all respect.

P/F mirror of following size of approved make with teak wood moulded frame and 6 mm thick hardboard backing including cost of all material, labour, T&P etc.size450x350 mm.

M/S S K ENTERPRISES