GE (N) P/TOKEN- 45 OF 2023-2024REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION, FITTINGS AND FIXTURES INCLUDING SUB MAIN WIRING AND DBS IN MD AND OTM OF HQ AREA AREA OF AGE E/M UNDER GE (N) PUNE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes all as specified.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade with proper colour coding ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH green cable as earth continuity conductor to common earth and connecting to earth dolly with copper lugs complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One light point controlled by two 2 way switch.

All as per item No 4 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One light point controlled by two 2 way switch.

All as per Item No. 6 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Modular Switch piano flush type, single pole, one way, and 10 Amp complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 16 Amp complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3/2 pin, 6 Amp piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 6/16 Amp and 2/3 pin combined, 16 Amp, piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watts single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for Bell push modular 6 Amps complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for for Lamp holder, PVC body with back plate suitable for batten fitting completes all as specified.

S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified

S & F for Switch piano flush type, single pole, one way, and 5 Amp complete all as specified.

S & F for Switch piano flush type, single pole, one way, and 15 Amp complete all as specified.

S & F for Switch socket combination, 2 in 1, 3 pin 5 and 15 amp flush type universal as directed.

S & F for Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F for Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular type mobile charging socket double module for mobile charging USB type 1.5 amp 230 volt 50 HZ AC supply complete all as specified and as directed

S & F ceiling fan regulator socketed, step type, flush type heavy duty, 120 watts suitable to work on 230 volts Ac supply complete all as specified.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping as per site requirement and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid casing caping as per site requirement and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with multistranded copper conductor of size 10 Sq. mm nominal area and drawing into PVC non metallic rigid casing caping per directions of EIC and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 10 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main boardcomplete all as specified and as directed. Note:- four runs of 10 sqmm cable, two runs of 10 sqmm cable and one run of PVC heavy duty conduit/casing caping as per site requirement will be measured as one unit.

M & L for Sub main wiring concealed in brick/stone masonary with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through concealed PVC non metallic rigid PVC conduit and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of PVC concealed conduit and accessories will be measured as one unit

M & L for Sub main wiring concealed in brick/stone masonary with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid concealed conduit and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6.0 sqmm cable and one run of PVC concealed conduit and accessories will be measured as one unit

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar including MCCB 63 Amps 4 pole for incoming etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs double door with locking arrangement in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed . Make - Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts suitable for fixing double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make -Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB SPN 6 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make - Schneider/ Legrand/ L&T/ ABB.

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F for wall/ceiling mounted LED 20 watts white/warm white as per site requirement with out put of minimum 2000 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- Halonix Cat part No HLB-03-20-CW-AL-SQ , Philips BN021C LED 22 S PSUCWGR, Jaquar LGLZUIX022XN.

S & F for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 3 to 4 hrs back up with out put of 2000 lumens , box type (decorative) light fitting, 230 volts with aluminimum body and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- Halonix Cat part No.HLB-08-20-CW-INV or equivalent makes in Havells, Lukar.

S & F for LED down light recess mounted luminare, round/square type 15 watts as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat part No. LNEP01S015XN/LLCN01R01SXN, Halonix HLDLR31-15CW/ HLDLR-S27-15-CW,Philips DN296B LED 15S-6500 PSU WH.

S & F for recess mounted 2' x 2' square LED panel 36 watts, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.

S & F for wall/ceiling mounted 10 watts or more indoor, box type light fitting white/ warm white as per site requirement, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN, Philips BN021C LED 12S 6500 PSU GR or Halonix

S & F for wall mounted LED 06 watts (WW) or more, 3000K with good color rendering (CRI>70) picture light fitting, 230 volts with durable aluminium housing and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and as directed. Make :-Philips model No. 30973 or Luker I-3, LIMR6.

S & F for MCB tripple pole and neutral rated capacity 100 Amps, 415 volts Ics/Icu 100 % breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB tripple pole and neutral rated capacity 32/40 Amps, 415 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB Single pole and neutral rated capacity 5 to 40 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB Single pole rated capacity 6 to 32 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

Supply and fix MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole. Make: Havells Cat part No DHDTCSN0251020 OR Equivalent Schneider/Siemens/Legrand.

Supply and fix for sheet metal enclosures single pole and neutral enclosure with a three pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.Make - Scheinder/Legrand/L&T/ ABB

S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep with louvers (as per Cat Part No -698500 Ivory new of Make- Indo Asian or Bajaj Maxima DX/ Usha Striker) including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -698501 of Make Indo Asian or equivalent Make- of automberg, crompton/Havells/Bajaj)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Automberg, Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 12 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with each terminal including necessary fixing arrangement of size 1 or 2 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set terminal including necessary fixing arrandements of size 4 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set terminal including necessary fixing arrandements of size 6 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set each terminal including necessary fixing arrandements of size 8 module including removal of old unserviceable one complete all as specified and as directed.

S & F for PVC surface modular box with modular plates inner and outer with complete set each terminal including necessary fixing arrandements of size 12 module including removal of old unserviceable one complete all as specified and as directed.

S & F for modular plates white colour with frame of 1 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 2 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 3 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 4 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 8 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 12 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 16 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for modular plates white colour with frame of 18 module including removal of old unserviceable one complete complete all as specified and as directed

S & F for LED spot light suitable for operation on 230 volt 50 Hz AC supply Recess-mounted, COB-based, round xed LED downlight with 60 beam angle 08/09 watts or above white / warm white including driver as per sample including removal of old unserviceable one complete all as specified and as directed. Make Halonix Cat No. HLDLR-27-09-CW, Havells LHEBMKPFIHIW008, Driver LSSCRX1252, Jaquar LETSO1R010XC.

S & F for casing and capping size 50 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 25 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 20 mm including removal of old unserviceable one complete complete all as specified and as directed

Supply & fix in replament of old unserviceable decorative wall mounted energy saving 03 watt or above LED bedside light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories. Cat Part No 48042 of philips black & metallic , Havells model Uneco, Jaquar.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- USHA, Heleous,Bajaj, Orient Electric I-Tome, Atomberg Effico Plus.

Supply and fix for wall mounted fan of size 400 mm sweep BEE. Five star rated ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- Bajaj MIDEA BW 2200, USHA Pentacool, Havells V3.

S & F in Replacement of Decorative wall mounted luminaire with two light frosted glass with chrome finishing wall lamp with E27 lamp holder with and including LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-MB160275542A , or its equivalent in Philips, Havells, Bajaj.

Supply and fix LED bulb warm white 10 watt E27 including removal old existing unserviceable one complete all as specified and directed.

Supply and fix LED bulb warm white 08 watt E14 including removal old existing unserviceable one complete all as specified and directed.

M& L for Plastic trunk of size 150x50 mm ISI mark with flexible cover of 130 mm width, internal angles (adj from 80 degree), external angles (adj from 60 degree), joints for 130 mm width cover, base joint and end cap complete including all fixing arrangement all as specified and as directed by Engr-In-Charge.

M& L for Plastic trunk of size 150x150 mm ISI mark with flexible cover of 130 mm width, internal angles (adj from 80 degree), external angles (adj from 60 degree), joints for 130 mm width cover, base joint and end cap complete including all fixing arrangement all as specified and as directed by Engr-In-Charge.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Suchit constructions

K D Electricals

ANAND ENTERPRISES

KSP ENTERPRISES

industrial suppliers