SPL REPAIR TO ROOF TREATMENT OF BLDG NO P-3 (MT LIVNG OF 3/8 GR, PROVN OF PCC DRAIN NEAR BLDG NO T-11 TO T-19 AT TPT LINE OF 3/8 GR AT MORABADI, Addn/Altn of Bldg No T-1(Canteen) at No7CI Det CCCIUAND CERTAINMINOR WORKSAND MAINTENANCE WORKUNDERGERanc

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose of soil.

M&L cement concrete 1 : 4 : 8 type D-2 using 40mm graded stone aggregate as in fdn, filling & mass concrete.

M&L brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M&L RCC 1 : 2 : 4 type B-1 using 20mm graded stone aggregate as in coping/kerbs and the like including weathering, slightl rounded or chamfored angle and throating Lintles band up to 1.5 mtr Span complete all as specified and directed

M&L RCC 1 : 1.5 : 3 type B-1 using 20mm graded stone aggregate as in slab supported on walls, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Use and waste form work to soffits of suspended slabs such as roof slabs. Floor slabs, landing and similar work not exceeding 200mm thick (Horizontal or slopping) finished surfaces.

M&L TMT bar 10mm dia and over mild steel bars cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with claps quality confirming to TMT Bars.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM(1 : 6) finished fair and evenvcomplete all as specified and directed.

M&L hardcore of guage exc 63mm but n. exc 100mm deposited spread and leveled in layers n. exc 15 Cm thick water and rolled rammed to a true surfaces.

M&L cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth using extra cement.

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 2000 litres hoisted and fixed in position all as specified in SSR Part I

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15 mm bore pipe.

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

M & L preparing new plastered or unplastered surfaces of wall and applying three coat of white wash on ceiling complete all as specified and as directed

M&L returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 Cm thick with soil in any type of soil.

Removing surplus soil to a distance n exc 50M and depositing where directed at a level not exc 1.5M above the starting point.

Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250mtr and not exxc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, complete all as specified and directed

Demolition of cement concrete of any description and in any position complete all as specified and directed.

Brushing neat cement slurry with 3kg of cement per sqm.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor using liquid water proofing compound to make surface in level complete (liquid WPC shall be measured seperatly).

M&L providing, cement concrete 1 : 2 : 4 type B-0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges with using water proofing compound(liquid WPC shall be measured seperatly) complete all as specified and directed.

M&L for bedding layer of mortar 10mm thick finished fair and even in CM 1:4 mixed with liquid water proofing compound (liquid WPC shall be measured seperatly).

Supply only liquid water proofing compound

M&L Cleaning plastered roof surface and applying a coat of Oxidised bitumen based solvented primer @ 0.3 kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed.

M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with torch sealing with lap of 100mm and the overlap shall be selaed by flame complete all as per manufacturer instructions and complete all as specified and directed

M&L for applying a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm including cleaning surface.

M&L for applying protective coating with bituminous based aluminium paint @ 0.2kg per sqm in two coats compete all as specified and directed.

Dismantling water tanks exc 250 & n exc 500 ltr capacity and same was refixing complete all as specified and directed.

Surface dressing n exc 15cm deep and getting out in soft loose soil.

Excavating in post holes (or similar holes ) n.exc 0.5cum getting out returning filling in raming earth or broken rubble mixed with earth around in layer n.exc 25cm watering and removing surplus soil to a distance n.exc 50mtr and making good surface in soft/loose of soil.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agrregate) as in sub base of floor all as specified and directed.

M & L machine pressed coloured precast concrete interlocking paver block with grey cement and no pigment any shape and size conferming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation all as specified and directed.

S&F Steel work in tubular tusses(hollow square pipe or circular pipe) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (square hollow pipe, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde- E- 250) quality- A

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes with riveted, bolted or welded attachment confirming to Fe 410 -W (Gde- E- 250) quality- A

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified

M&L for preparing of new previously untreated surfaces of Steel and Iron surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxid primer complete all as specified and directed.

M&L cement concrete 1 : 2 : 4 type B-2 using 40mm graded stone aggregate as in surface channels and drains all as specified and directed.

M&L providing precast cement concrete 1 : 2 : 4 type B-1 using 20mm graded stone aggregate as in Manhole/drainage cover slabs set in cement mortar 1 : 4 complete all as specified and directed.

M&L in repairs wooden kictchen cabinet using19mm thick plywood BWP Grade pasted with 0.8mm thick white and decorative leminated mica sheet with wood adheshive and each shutter fixed into auto hydraulic hinges 02 Nos and necessary CP decorative handle complete. of sizes

M&L in repairs wooden kictchen cabinet of sizes 3.1 Mtr x 0.85mtr and depth 0.6 mtr with 06 Nos drawer of sizes 0.8x0.55x0.3M and 02 Nos drawer of size 0.50x0.50x0.3M with using19mm thick plywood BWP Grade pasted with 0.8mm thick white and decorative leminated mica sheet with wood adheshive and each drawer fixed with 2 Nos channel in each drawer and necessary CP decorative handle complete all as specified and directed.

M&L in repairs wooden kictchen cabinet of sizes 3.10 M x 0.6 M and depth 0.45 m with 03 Nos self of sizes size 0.85x0.45mtr & 01 No shelf of size 0.45x0.35mtr including 06 Nos shutter of size 0.425x0.60& 01 No Shuter sizes 0.50x0.6M using19mm thick plywood BWP Grade pasted with 0.8mm thick white and decorative leminated mica sheet with wood adheshive and each shutter fixed into auto hydraulic hinges 02 Nos and necessary CP decorative handle complete all as specified and directed.

M&L in repairs wooden kictchen cabinet of sizes 3.10 M x 0.6 M and depth 0.40mtr with 03 Nos self of sizes size 0.85x0.35mtr & 01 No shelf of size 0.45x0.30mtr including 06 Nos shutter of size 0.425x0.60& 01 No Shuter sizes 0.50x0.6M using19mm thick plywood BWP Grade pasted with 0.8mm thick white and decorative leminated mica sheet with wood adheshive and each shutter fixed into auto hydraulic hinges 02 Nos and necessary CP decorative handle complete all as specified and directed.

M&L in repairs wooden kictchen cabinet of sizes 2.52x 0.85M and depth 0.60M with 06 Nos shutter of size 0.42x0.72M and 02 Nos shelf of size 0.8x0.53mtr, with using19mm thick plywood BWP Grade pasted with 0.8mm thick white and decorative leminated mica sheet with wood adheshive and each shutter fixed into auto hydraulic hinges 02 Nos and necessary CP decorative handle complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc., to store and rubbish not exc. 50m

M&L rendering 15mm thick on other than fair faces of brick work or stone masonaery in cement mortar 1 : 6 complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5sqm but n exc. 4 sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc. 1.5sqm.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F 2nd class hard wood 35 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F of 125 mm size aluminium handles cast type anodised.

S&F Aluminium alloy, anodised, sliding door bolt of length 300mm with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F powder coated anodised/aluminium frame with two track of size 61.6mm x 31.75mm x 1.20 thick and size of shutter frame 39.4mmx17.7mmx1.2mm thick sliding type windows /ventilatorss shutter with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass n.exc 1 Sqm each panes complete all as specified and directed.

S&F powder coated anodised/aluminium frame with three track of size 91.8mm x 31.75mm x 1.20 thick and size of shutter frame 39.4mmx17.7mmx1.2mm thick sliding type windows /ventilatorss shutter with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including two shutter having 5.5 mm thick tinted glass n.exc 1 Sqm each panes and one shutter with stainless steel wire mesh 0.35mm dia and 1.18mm aperture complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L Complete removal of existing treatment on walls and applying two coat of oil emulsion distemper of approved colour over 2mm thick wall care putty complete all as specified and directed.

Rajeev Ranjan

M/S Manoj Kumar Sinha

M K Enterprises

M/S ABDHESH CONSTRUCTION

jai maavindwashni sales & supply

Raj Construction

india trading company